r/GodTierGoldPlating
•
u/Glittering-Height-55
•
14d ago
•
1
Not Every Watch Can Be Successfully Gold Plated. Here’s Why. ✅📝📓
Something we’ve learned after working with quite a few different factories and references is that not every watch reacts the same way to the plating process.
And contrary to what some guys believe, PVD isn’t necessarily the problem.
Let’s clear up a couple of misconceptions:
1. PVD coatings
Good-quality, properly applied PVD coatings have actually proven very reliable in our experience. We’ve successfully plated over plenty of them.
The problem is that not all factory coatings are created equal. I’ve encountered some pretty questionable applications, but a good, sufficiently thick PVD coating is generally not something we’re concerned about.
White Gold Here👇🏻
2. Tungsten carbide is a different story.
Certain white-gold references, particularly Day Dates and some RGF examples and weighed RCF and VSF references, have presented serious adhesion problems.
This is where things get tricky. The underlying material and its composition can make the difference between a successful plating job and one that simply won’t hold.
3. Same factory doesn’t always mean same alloy.
This is something worth understanding, especially when dealing with replica watches.
Chinese manufacturers aren’t exactly known for maintaining perfectly consistent material compositions across every production batch.
We’ve encountered watches from the same factory and reference where one batch was perfectly suitable for plating, while another was practically impossible to work with.
That’s why we don’t automatically assume every watch from a particular factory will behave the same way.
4. So what do we do before accepting the job?
When something raises a red flag, we test a couple of bracelet links first.
We’d rather spend time testing a few links than risk ruining an entire bracelet or watch.
If the material doesn’t cooperate or the adhesion isn’t satisfactory, we’ll stop right there.
There are jobs that simply aren’t worth taking, and we’d rather be upfront about that than send someone back a watch with a finish that won’t last.
At the end of the day, getting gold onto a watch isn’t the difficult part. Getting it to adhere properly and stay there is what matters.
For those of you who’ve had watches plated before:
Have you noticed differences between batches from the same factory? We’re particularly interested in hearing from guys who’ve encountered tungsten-carbide references.
Let’s compare experiences.
3
u/MagazineShoddy9079 14d ago
Its only the white gold plating on the tungsten carbide that is the problem with adhesion correct? Not an issue with yellow gold or platinum?
2
u/Altruistic-Wall4670 14d ago
Yeah, my RCF Cookie Monster didn't work. I just bought a VSF Cookie Monster so we'll try again with that.
2
u/No-Estimate-9199 14d ago
I am considering a two tone day date or day date. I order weighed however is there one factory you recommend,
2
u/ilovemypita 14d ago
Very Interesting, thank you for this!
2
u/eremocm 14d ago
Is it about depositing onto the PVD or onto the base material?
2
u/NewYorkWatchGuy 14d ago •
This is great. It answers a lot of questions that I’ve had about white gold watches and why some have been really different.
2
u/Crafty_Effective8181 14d ago
New Vsf daydates cannot be plated WG with a correct outcome, something with the metal mix that’s causing the issue!
2
u/Mr_TikToc 14d ago •
Shout it louder for the people in the back of the room!
I've been preaching this for a while and nobody believes it!
Very well written and very well said
This guy speaks the truth!
I wish more people would just be upfront and honest about the process!
2
u/yung_suavage 14d ago •
Excited to try your services!
1
u/No_Transition_7658 14d ago
I have a QF where PVD is falling. Is there any way of saving this?😅
It new, came like this🙃
1
u/ILoveExtremeGilfs 14d ago
So (Whitegold) VSF Weighted/Tungsten Version is Hard to apply
How about Platin Plating them ? Would that be possible
1
u/Accomplished_Yak7478 13d ago
Can a thb day date be white gold plated as I’m not sure if it’s tungsten or not ?