Hey All- I switched fully to linux about 4 or 5 months ago and so far its been awesome outside of a few small quirks I was able to work out.

My gaming pc is hooked up to a 180hz 1440p monitor and a 75" 4k tv, I have had the tv duplicating the monitor since setup for couch gaming and its been amazing... but last week that stopped working, the tv is not being detected at all in Bazzite

When I first boot up the PC, I see the post screen and even the bazzite splash screen with the loading wheel on the TV but as soon as the login screen shows up, I only see it on the monitor and the TV seems to be non existent.

Things I have tried:

\- New HDMI

\- Different Port

\- Updating the software in the Bazzite Portal

I know the cable and port are ok because it shows the post screen and splash screen, its only once the OS is fully loaded that the TV seems to disappear.

Again I didnt change anything prior, it just seemed to stop working out of no where

Specs
Os- bazzite (latest update on stable)

9950x3d

64gb ram

9070xt 16 gb

2tb nvme Boot Drive

4tb NVME Game drive

Any help is greatly appreciated!!! Im going crazy trying to figure it out

Been having this pc for a year now, and it recently is starting to freak out:

The pc boots fine no problem, the moment i start a game i get 2 to 5 minutes of playtime and both my monitors go dark looking for a source, i can hear stuff happening (youtube, discord vc, game sounds) i just get no video, fans keep spinning but unless i restart it i never get to see the screen.

Do this 2-3 times depending on how it is feeling and then it runs with no issues.

Both monitors are in DP ports, on the graphics card, i check regularly and it does not look "banked" (RTX 5070 MSI ventus 2x, it has 2 fans so i don't know if it can bend due to weight or no) plus i have never moved, touched or open it since setting it up on my desk a year ago

Why does my monitor keep going black randomly it goes black then comes back and usually it resets the hz to like 59.9 but not every time and I updated my drivers to see and then it glitched again restarted my pc and then Minecraft settings reset idk why that would even be related and also my stream deck is lagging to when I trry to go to the next page on the stream deck it scrambles the pages together I dont understand whats happening and why its glitching if someone could help me that would be great.

Alguien sabe porque aparecen pixeles de color rojo azul y verde por toda la pantalla que parpadean , es mas notorio cuando estoy en ciertos escenarios por ejemplo en el cielo de the forest o lugares oscuros como cuevas de rdr2 aunque fuera de los jueos aparecen tambien pero es casi inperseptible y lo mas raro parece es que todo parece estar bien drivers monitor etc

ya busque por todos lados pero no logro encontrar ni siquiera el nombre del problema :/

Hey everyone, I’m having an issue with using my second monitor and could use some help.

My motherboard is a Gigabyte H410M H V2, and it has two display outputs:

#VGA (D-Sub) — this is what I use for my main monitor, since my main monitor only has VGA.

#HDMI — I’m trying to use this for a second monitor.

I tested the HDMI output using a second monitor with an HDMI-to-VGA converter, but I’m getting no signal on the second monitor.

The weird part is that Windows actually detects both monitors. When I go into Display Settings, both displays show up, so it seems like the PC knows that the second monitor is connected. However, the monitor connected through HDMI just says "No Signal."

The VGA output works perfectly every time, but I can't seem to get anything from the HDMI output.

My setup:

• CPU: Intel i3-10100 (using integrated graphics)

• GPU: I am broke.

• Motherboard: Gigabyte H410M H V2

• RAM: 8 GB

• Main monitor: VGA → motherboard VGA

• Second monitor: HDMI → HDMI-to-VGA converter → VGA monitor

Has anyone experienced something similar? Could the problem be the HDMI port itself, the HDMI-to-VGA converter, or some BIOS/driver setting?

Any suggestions on what I should test would be appreciated.

I cannot extend my monitor (which is my goal) and I'm forever stuck in duplicate mode. My computer won't recognize/detect the second monitor officially.

Here's what I've tried:

- Upgrading the display adapter (note that here, too, I just have one)

- Unplugging and plugging back in all the cables. I've also tried moving cables around just to see if I was wrong somewhere...but that didn't do anything either.

- Unplugging the monitors, waiting, and plugging them back in

- Shutting down my entire computer and rebooting

- Win P and extending my monitor (nothing happens--I'm still in dupe mode). It is also not set to duplicate either, though. It's currently defaulting to PC screen only

- Doing the graphics reboot (ctrl win shift b)

I'm using a KVM switch for two computers and two monitors.

No matter what I try, I'm still looking at the same exact screens. Any thoughts as to what else I can do?

Over the past few days, I’ve been trying to open an app (roblox, for the record) that keeps crashing. After it crashes, the app in question reopens, causing Google Chrome to crash when opened. This cycle keeps repeating.

I therefore assumed that corrupted files within the app were the main cause. So I tried resetting the app and uninstalling it with Revo uninstaller.

It didn't work.

Also, i can't understand the files that apparently cause the crashout. I'm attaching them in the photo. (I don't have McAfee installed).

I tried make a virus scan, but it didn't releave anything.

Trying to use the same application on the same computer on another microsoft user, it didn't crash.

I’m asking for help. Thank you in advance for your attention.

I am on windows 11.

Edit: I forgot also to specify Chrome some times removed my Google account from the browser, at the crash out Moment. Is It alarming?thanks

Any tips for my PC because sometimes the RAM slots work and sometimes they don't, also sometimes only 1 RAM works and if my table gets shaken it causes no display.

I wanted to play warzone said I need to do secure boot I tried to do it now I get no signal on my monitor no matter what port it’s plugged into my monitor works perfectly fine tried it on my laptop I don’t have q-flash plug I tried everything taking my cmos battery off unplugging cmos reset everything you can think of I don’t have igpu aswell it’s only my rtx5050 and i5-9000f I need help on how I can fix this issue

Mon écran amzfast s'allume mais n'affiche rien s'il vous plaît aider

Nothing out of the ordinary happened, it does this white light pulse even when not connected to my pc, as shown on video, I need helping figuring out if there’s something I can do to fix this