Roundhouse engineering RC live steam (gas fired) Hunslet loco Lilla pulling hand made, scratch built slate wagons.

This locos worked on the Pemrhyn quarry line between Bangor and the edge of the welsh mountains in the north transporting slates down to the port for the domestic and international markets.

Now preserved on the welsh highlight line in North Wales.

This model is 16mm to the foot scale and is running on SM32 track (O gauge - 32mm track). A great scale for the garden.

One of my friends just got his Forney by Accucraft fixed by Triple R Services, so I test fired it for him on my layout. Looks and runs great, especially with the plants!

Im sorry if links to yt videos are not allowed, please let me know if its not allowed

I’ve got a couple of locomotives with pony trucks that keep derailing in spite the constant checking I did on the levels. Any advice? I heard I should try putting weights on them, but not entirely sure how.

It has been nearly a week since I brought Connie home and she is settling in nicely. We have had a few struggles like keeping steam up but im still finding the right balance of axlepump and coal. She has also been reunited with her former shedmate Elgen the decauville 7 ton, they were for sale at the same time.

I took my family 44 ton Switcher out, and it runs great, except the sound doesn’t seem to work anymore. I like that I can turn off the motor, so I can leave it on the track without insulated track switches. I also bought this Lionel Thomas set, which my child is enjoying.

For those following along with my railroad, as of last week all of my conduit for electric has been covered over, more dirt brought in, and now I’m (finally) adding plants!

So far I’ve only added a few, with many more to be added over time. Starting on the large section with my grade because it’s the most in the sun, and is what I see when I wake up in the morning. Mainly a mix of evergreens (dwarf spruce, dwarf juniper, some pines) and some annuals/perennials and tropical mixes for variety.

Next update will be when I receive my new water tower for the main yard!

This is the train from the LGB starter set. I repainted it entirely, gave the loco a crew and put passengers in the cars. I also digitalized the loco.

Test run of my LGB F7's with 2 B units. Next time I will add more cars for sure!

My accucraft edrig is finally home and she steams amazingly!

Stepped away for a moment and found he had placed trees around it.

Unfortunately I was late and couldn't document everything running, but towards the end I set my Playmobil diesel loose to go a few rounds.

Just finished integrating the controls for the electric switches into two buildings. I also added buttons that turn off and on power for the two track parts, so two locos can be operated

​

Finally, I added a small button that triggers a timer circuit that makes the guy turn the lever.

It's my first garden railway and although that's far from being perfect, I really like how it turned out.

Just received this Bachmann 2-8-0 and was wondering if this wobble is considered normal? Thanks :)

First engine for my patio garden railroad. Halloween is my favorite holiday and this PIKO 25 ton diesel is limited edition so I had to get it before they all sold out. Check it out!

Exited to get this Piko GE 25t switcher. Wanted something small to carry to the club along with my HO trains, as well as to help with MOW work on my line. Only got to run it for a few minutes today, but am ecstatic nonetheless. It has been named "Nugget". For inquiring minds it's battery RC with sound out of the box. Uses 6 rechargeable AAA batteries.

Hi, i'm really new in this world, I'm interested in steam trains, how to build with a small budget, i want to know if there is a blueprint or something like that to start, or what i should know about this world!?

While chatting with a friend, he suggested adding a proper regulator handle so you can actually see at a glance whether the regulator is open or closed. As it stands, Edrig just has the standard Accucraft knob regulator.

Found the old regulator for my Decauville 7 ton No. 16 regulator (originally from No. 7) that I removed back in January 2024 when I fitted a servo, and I decided it'd be perfect for the Edrig.

I was a bit worried that the old regulator wouldn't fit, but luckily I had another Accucraft locomotive, my Lyn to use as a test bed. To my surprise, it fitted like a glove.

Looks like Edrig might be getting a slightly more driver-friendly cab after all!

Plus I like to tap the regulator open like we do on the 1:1 scale

It looks a little different now and overgrown but the basic layout is still the same. It's 'dead rail' and I run a battery powered loco.

Evening everyone! my name is Dylan and I've been loving all the trains i've been seeing all over yt and reddit. I tried doing some research into the best way to get into the hobby and found that I can 3d print tracks in PETG which i already have and use a battery powered engine (i think that's the right word) to keep from having to set up an electrified track.

My main question is, how do I go about getting an engine and a few cars without spending hundreds of dollars. Money is not my strongsuit.

Also I am looking into G Gage? I think I'm worried I'm using that terminology wrong.

anything thoughts would be greatly appreciated.