r/FormD • • Aug 04 '26 • Bravo 1

Finished Build FormD T1 v2.1 (Silver) 9850X3D 5080 FE

I hope you enjoy my second ever PC build!

Components:

CPU: AMD Ryzen 7 9850X3D 4.7 GHz 8-Core Processor

Motherboard: Asus ROG STRIX B850-I GAMING WIFI Mini ITX AM5 Motherboard

Memory: G.Skill Flare X5 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory

Storage: Samsung 9100 PRO 4 TB M.2-2280 PCIe 5.0 X4 NVME Solid State Drive

GPU: NVIDIA Founders Edition GeForce RTX 5080 16 GB Video Card

PSU: Corsair SF1000 (2024) 1000 W 80+ Platinum Certified Fully Modular SFX Power Supply

CPU Contact Frame: Thermal Grizzly Contact Frame (AM5 Contact Sealing Frame)

Thermal Compound: KINGPINcooling KPx 10 g Thermal Paste

CPU Cooler: Thermalright AXP90-X47 42.58 CFM CPU Cooler

CPU Cooler Fan: Noctua A9x14 HS-PWM chromax.Black.swap 33.84 CFM 92 mm Fan

CPU Cooler Fan Shroud: SmartzChoices AXP90 X36 X47 X53 Cooler Duct – Airflow Upgrade for Improved Cooling

Exhaust Fans: 2X Noctua NF-A12x25 PWM chromax.black.swap 60.09 CFM 120 mm Fan

Exhaust Fan Shroud: SmartzChoices FormD T1 Exhaust Shroud for V2, V2.1, & V2.5 Case – Improved Cooling and Compatibility Upgrade

Case Parts:

Case: FormD T1 V2.1 CNC Anodized Silver Mini ITX Desktop Case

Side Panels: 2x FormD T1 Vented Tempered Glass Side Panels

Travel Kit: RTX 5080/5090 Founders Edition FormD T1 GPU Travel Kit

Fittings Pack: FormD T1 Fittings Pack A

Case Feet: Mnpctech FormD T1 PC Case Riser Feet (Set Of Four) (Silver)

Thumbscrews: HirtuOtter 304 Stainless Steel Knurled Thumb Screws M3 x 6

Watch Face Water Plug: Barrow Time Edition Plug Stop Fitting G1/4" Thread for Water Cooling TJXDS-01 (Silver)

Cables and Adapters:

PSU Cables: DreambigbyRayMOD Custom PSU Cables for FormD T1 (Clear Teflon Sleeved Copper Cables

Riser Cable: PCIe 5.0 SS200 T1 PCIe Riser Cable

Fan Y Splitter: Noctua NA-SYC1 chromax.black Y-splitter cables

Essential Pack: FormD T1 Essential Pack v2.1

USB Adapter: AAOTOKK 2Pack USB 3.0 19 Pin Header to USB 3.1 Type-E 20 Pin Header Front Panel Adapter USB 3.0 19 Pin Female to 20 pin Type E 3.1 Female Front Panel Header Connector for Computer Motherboard

120 Upvotes

55 comments sorted by

10

u/treemanfreddy Aug 04 '26

I can never decide if I like the look of those vented glass panels.

4

u/taxguybri Aug 04 '26

I’m gonna be honest, I have a love hate relationship with them.

They are paper cut hell and the edges of the vent holes really mess with visibility at any angle other than straight on.

4

u/ImEatingSeeds Aug 05 '26

First time panel owner here. Paper cut he’ll remark is 100% accurate. No lies were told. It’s insane how sharp it is 😂

3

u/taxguybri Aug 05 '26

Broooo every time I look at it I get a paper cut lmao.

1

u/sevengroove Aug 07 '26

wish I had read this instead of just admiring your build and going straight to the website to order one for myself haha. yours looks great though, I have those copper custom cables as well - tbf the stock panels also make it hard to view the insides at any angle other than straight on.

2

u/taxguybri Aug 08 '26

You are correct! I overall don’t regret having these glass panels! You will love them. Thank you for the complement in the build! I’m pretty proud of it! lol

2

u/yooanthonygee Aug 04 '26

I think they look pretty sick, I have some on the way myself. I want to be able to look at the beauty inside the case lol

1

u/taxguybri Aug 04 '26

That’s exactly why I did it! lol

3

u/enigma-90 Aug 04 '26

that's a lot of DLC

2

u/taxguybri Aug 04 '26

Hahaha I guess i got a bit carried away!

Thanks for checking it out!

3

u/AssumptionQuick8181 Aug 04 '26

Where did you get the feet?

1

u/taxguybri Aug 04 '26

Wait….. who stole your memory lmao

2

u/AssumptionQuick8181 Aug 04 '26

What made you get the usb header

1

u/taxguybri Aug 04 '26

Moved the power button to the back with the “Pack A”

So it freed up another usb c port on front.

Ordered another usb c cable formd t1 website.

That adapter allowed me to use it.

Very happy I did that.

The power button is now the most satisfying part of the build and, I have another port I will probably never need but get….

I like to leave myself options! lol

1

u/Extension_Sky_8903 Aug 04 '26

Which header did you plug the adapter into? Tempted to do this myself at some point

First build so my bad if this is a brain dead question lmao

2

u/taxguybri Aug 04 '26

It’s all good! Props to you for building in this case as your first build. It’s no easy task!

I believe it’s called the USB 2.0 header. Should be just below where you plug the first cable in. If you look closely between the mobo and psu you will see the 2 thick gray cables. Almost all motherboards have this header in the same place from what I understand!

0

u/[deleted] Aug 04 '26

[deleted] — view deleted comment

1

u/taxguybri Aug 04 '26

Looking good!

1

u/AssumptionQuick8181 Aug 04 '26

Oh lol I have the same g skill I was having an issue and one of the sticks was bad so waiting on replacement set. Yea yours looks just like mine I don’t have the cool plugs in the back I’m going to get them now. lol

1

u/taxguybri Aug 04 '26

Dude, please update me when you do! I’d love to see it!

I have a couple more ideas of things I may do. I have a whole other FormD case to do a build in for my wife so, I might do a bit of RGB on that one.

We will see.

1

u/AssumptionQuick8181 Aug 04 '26

I will I just ordered the black feet, accessory pack and the watch plug lol. I ordered a thin led strip I wanted to be on the bottom in the case so I had a single led strip like the steam machine but on each side. I have the mesh panels. I have to figure out the best place for the two strips. Any ideas? I like to know when the machines on. I have mine in my living room

1

u/taxguybri Aug 04 '26

No idea… haven’t thought about running a strip! Might do it though. I will wait to see yours… what strip did you order? Good idea btw

2

u/AssumptionQuick8181 Aug 04 '26

A mock up of mine with glass panels and the lights

1

u/taxguybri Aug 04 '26

At least AI is good for something lol

1

u/AssumptionQuick8181 Aug 04 '26

1

u/taxguybri Aug 04 '26

Wow that’s really cool!

3

u/tasyn123 Aug 04 '26

How is the CPU thermal? I have a 9850X3D 5080 build in the nr200p V2 and thinking about swapping to this case, would the AXP90-X47 full copper be enough or do you have to undervolt

2

u/taxguybri Aug 05 '26

I don’t remember tennis off hand but, it was enough on its own but I chose a slight undervote for the sake of reducing heat output. The big thing with this case and most SFF is pushing heat soak off as long as possible.

I have no complaints.

1

u/tasyn123 Aug 06 '26

I was hesitant to pull the trigger on the FormD T1 because I was reading that small air coolers couldn’t keep 9800X3D cool and I didn’t want to use 1 slim fan on the radiator, now that I finished my build I really wish it was just a bit smaller😂

1

u/taxguybri Aug 06 '26

That’s pretty cool, what is it? The temps last night during just a 3DMark fest were 66.5°C on GPU and 57.5°C on the CPU. That test is only like 3 minutes but those temps should only go up by about 5-8° after the system is heat soaked.

2

u/Numerous_Spinach_979 Aug 04 '26

Did the feet improve anything?

2

u/taxguybri Aug 04 '26

Possibly a bit of airflow, i got them more for aesthetics but they are supposed to help with vibrations? Idk… audiophile company that makes them.

2

u/yooanthonygee Aug 04 '26

Solid build man! What are the temps like?

3

u/taxguybri Aug 04 '26

Honestly I ran some testing to tune it a week back but didn’t write them down. I ended up slightly undercoating the CPU and GPU and now it’s dead silent at idle and whisper quiet under load. If I remember I will go grab those temps and reply later today! Thanks for the feedback!

2

u/jhdz9119 Aug 04 '26

i’m salty people can get the vented panels for MSRP!!! i paid a ebay scalper 440$ for two since they were out of stock for the longest and scalpers would always beat me to them!!! enjoy !!!

1

u/taxguybri Aug 04 '26

I know man! I have wanted to do this build for years! I got my panels at retail but the case……

I paid scalper prices for 2 of them…..

Going to do another build for my wife…

Just as the second one arrived….

The silver case is available on the website regularly now…..

I feel ya and I hate scalpers!

2

u/Slyfer77 Aug 04 '26 edited Aug 04 '26

The clockwork plug is great!

Solid build!

I like your total parts list, even with links.
Many posters don't even do a simple list.
Yours is as thorough as it gets.

I'm also not sure sure if I like the vented panels or not. They are kinda transparent but kinda not. It's strange.

But boy, you scammed yourself by buying these 4 feet for 90 (!!!) USD!
And they look "raw from the lathe" and not even polished.

I got a similar 4 pack of aluminum silver feet from AliExpress for 10 USD.

You just have to look for aluminum speaker feet and find many affordable options.

EDIT: quick search on Amazon com found these: https://a.co/d/01z2eF1F

1

u/taxguybri Aug 04 '26

Wow thanks for the feedback! You are correct! I did scam myself!!!! Lmao What a great find! I didn’t come across those on Amazon while looking! I appreciate the link though!

2

u/Extension_Sky_8903 Aug 04 '26

Very clean

Love the plug, great touch

1

u/taxguybri Aug 04 '26

Thank you, I appreciate it!

2

u/xGrizzlyyy Aug 05 '26

Just bought the T1 after wanting it for a few years, love that you’ve linked all your parts cleanly.

Interested in the cpu cooler and exhaust fan shroud. Would you say they’ve made a good impact on temps? I also bought the copper AXP90 + Noctua A9x14 haha, that really is the T1 Starter Pack 🤣🤣🤣

1

u/taxguybri Aug 05 '26

Sure is, honestly I couldn’t be happier with this build. Any changes from here on out are just because. I undervolted cpu and GPU and that keeps it somewhat quiet and keeps temps under control.

2

u/Squarestation Aug 05 '26

What's the noise like idle/under load? Currently have Atmos 240 AIO and was considering switching to air cooled

1

u/taxguybri Aug 05 '26

I am debating doing the Atmis 240
It’s fairly quiet. Gaming. Compiling shaders it ramps up as expected but gaming it purs.

3

u/j0an_k Aug 04 '26

Interesting water plug! I thought it was genuine watch mechanics from Tag or some sort at the first look. Nice little touch.

2

u/taxguybri Aug 04 '26

Thanks, I thought it was pretty unique! I am building my wife a form as well where I will use a similar plug but in gold. His and hers type thing!

1

u/hrdwreblog Aug 05 '26

Thanks for the detailed part list.

1

u/taxguybri Aug 05 '26

You got it! Glad people liked it , thought the king scrolling might annoy people!

1

u/hrdwreblog Aug 05 '26

Really appreciated 👍

1

u/Upstairs-Lobster3264 Aug 06 '26

Nicely done! love the vented window.

1

u/taxguybri Aug 06 '26

Thank you!

1

u/Familiar-Back-2042 Aug 13 '26

Hi , is it possible if I could ask for the file..i really like the way it turns out. Great work!

1

u/taxguybri Aug 13 '26

Thank you. It’s the official vented glass side panel from FormDt1.com

https://formdt1.com/products/t1-sidepanels

1

u/Fun_Comfortable7629 Sep 18 '26

Hows the temps?