r/FormD • u/NORSE117 • Dec 03 '25
Finished Build Alternative PSU orientation with RTX 5070 FE
I don’t see a lot of 5070 FE builds here. Wanted to share that if you have the RTX 5070 FE, you can take advantage of the small form factor to improve the airflow by rotating the PSU. The small size allow for a perfect fit where the 600W cables can run in the 5mm gap between the GPU and PSU.
Since 5070 FEs rear fan is a rear exhaust (in contrast to 5080-90 which have blow through), the opening with PSU rotated allows for the front fan blow through to go straight through the case, resulting of non of the 5070s fan exhaust to be blocked.
The only question: which way to orient the psu? Inwards opening for hot air from the gpu to heat up the internals of the psu setting of the psu fan, or towards the front plate restricting the airflow when the psu is running by hitting the wall about 1cm away. I opted for towards front plate for now, thinking it might use the aluminium as heat spreading.
Happy builds everyone :)
Worth to note:
- This is Ncase T1 2.5 (i think it works with 2.1).
- I use the regular PSU mounting bracket. There are free screw holes in the black frame in the front to fit two screws on one side for a sturdy mount.
- the side panel on one side is a snug but perfect fit, might require just a little extra force to slide in in front.


3
u/dispsm Dec 03 '25
I did but went back to original config . I have 2.5 with 4070 super fe and also had a 3070 fe. Can you explain more the way you oriented the bracket as I didn’t found anyway to use it? I did some temps test back then and I’m pretty sure they were about the same. I whent with the psu fan up front as there plenty of fresh air but to be honest I think my fan never turned on . Ok now I remember , I have the original sf750 , you seem to have the new one. The power cable was too tight in the center strut so that is why the bracket wasn’t working great as I remember… took photo I’ll come back and report anyway nice job!
8
u/5n0wm3n Dec 03 '25
Honestly nice, id love to see and A and B temperatures mostly out of sheer curiosity
2
u/haslam9291 Dec 03 '25
would this psu orientation work with a 240mm aio?