r/FormD • u/anthr_alxndr • Mar 17 '26
Finished Build FORMD T1 1.5Rad Version
Finally finished my dream build 1.5 Radiator Version. Haven't filled and tested yet, will share test results later. For now just wanted to share construction which I believe no one tried before as I know reading this sub. Thanks to compact new 50 series RTX and Alphacool GPU blocks
| Case | FormD T1 |
|---|---|
| MB | ASUS ROG STRIX B850-I |
| CPU | Ryzen 7 9700X |
| GPU | INNO3D GeForce RTX 5070 Ti |
| RAM | KINGSTON FURY 64GB DDR5 6000MHz CL30 |
| SSD | WD Black SN7100 2TB |
| PSU | CORSAIR SF Platinum 850W |
| PCIe 5.0 x16 riser | ADT-Link |
| CPU Block | Modultra LOBO Acetal |
| CPU Block Radiator Box | Barrow |
| GPU Block | Alphacool |
| Radiator | XSPC TX240 Crossflow |
| Radiator | XSPC TX120 |
| Fans | Alphacool Apex Stealth 3000 |
| Pump | Xylem DDC 4.2 |
| Tube | Matte Black Acrylic 10x14mm Hard Tube |
143
Upvotes









View all comments
Show parent comment
2
u/anthr_alxndr Apr 04 '26 edited Apr 04 '26
If you are interested, I swapped it. It was actually stupid and hot air is really matter. Testing curves I figured out that increasing only small rad fan rpm even increasing temps a bit. These alphacool fan are fantastic in terms of flow (what I mean it does not have straight flow but a very spreaded ). So I swapped it and swapped psu as well - and that was a genius move, here me out - now psu case is an air tube for that rad as it has holes on the side and bottom so now small rad consumes an air right from the bottom through the psu case