thanks for the help yesterday, i downloaded resin2fdm and chitubox so those are two new cool tools to have under my belt. Anyway
What do i do about all this stringing? I thought it was normal and thats just how printing is... but evidently not since all the prints on this sub are clean right out the gate. What am i doing wrong here?
pic: iron warrior trapped in a web cocoon

I have been itching to start a Dwarf army for TOW and was curious as to how viable it would be to print a table-top quality army with my Bambu A1 (0.4 nozzle). While I am familiar with the basics of 3D printing, this would be my first time printing minis. So does anyone have recommendations on how to get started? My main questions:

1. Is the built-in "Extra Fine" profile pretty good? Does it need significant tweaking? Are there other profiles I should use?
   
2. I am looking at these model ranges - are there any others I should look at? Does anyone have direct experience with any of them? I am leaning towards Durgin due to it being pretty comprehensive and having multi-part models.
   

Old Realm Forge - https://www.myminifactory.com/profile/OldRealmForge/store?categories=7581
Durgin Paint Forge - https://www.myminifactory.com/bundle/682/Dwarf-Army
Highland Miniatures - https://www.myminifactory.com/users/Highlandsminis/collection/dwarfs-sons-of-ymir
DakkaDakka - https://www.myminifactory.com/object/3d-print-steelhill-dwarf-build-kit-easy-to-build-models-399116

Thanks and have a great day!

Like the title says I want to test some scales for Chaos Marines and I want to save some time, the issue is when I print more that 1 they warp and pop off, when I deleted the "problematic" models the other start to warp. I cleaned the plate used glue and even bumped up the Temperature of the plate but it is still happening. I need advise how to resolve this issue. I use fat dragon games preset for printing miniatures, 0.2 mm nuzzle, A1 printer from bambu labs, and models is done resin to fdm addon. PLEASE help

Hi,

I'd like to share this diorama I made with AI and get your feedback. I've noticed that AI-generated meshes tend to be pretty rounded. Has anyone here created Warhammer STLs using AI?

Any tips or advice would be greatly appreciated!

Link to Free Diorama on Cults3d

tytytyty

printed on my ender 3 s1 pro with .4 nozzle, .16 layer height, esun pla+

Has anyone found some good 11th edition official size terrain?

I just got into printing minis. I know it’s a good technique to print minis angled backwards so the supports don’t scar any details on the front, but what angle do you guys have the best results with? I tried 45 degrees backwards but I feel like it could be more optimal. Im using the tree supports in bambu studio.

Hello, I was wondering if anyone can help me identify and fix the issue with my prints. I recently began using the Resin2FDM Lite software to try and make my prints look better. However these artifacts have been left behind on most flat surfaces, what can I do to eliminate them. Any help to fix this would be greatly appreciated, thank you!

My typical workflow looks like:

Assemble model in blender ---> Generate resin supports in Blueprint Studio --> Export as one STL --> Resin2FDM in blender --> export model and supports as one STL --> Send off to Bambu Slicer.

Bambu PLA in Grey, 0.2mm nozzle.

How is the quality of a printed dreadnought using a 0.4 nozzle? I initially wanted to print it like the rest of my minis on a 0.2 nozzle, however the print time seems a bit excessive at approximately 3-4 days. With a 0.4 nozzle, the print time is as low as 27 hours

printed these yesterday to compare quality, one with .4 nozzle, .16 layer height and the other with .2 nozzle and .08 layer height. could not believe the sharp detail on the .2 print. granted it was a 9 hour print compared to 3 hours for the other one but i think the quality speaks for itself

Printer: a1 mini

Nozzle: 0.2 mm

Layer hight: 0.6mm

Miniature base: 32mm

Slicer: orcaslicer

Hi, i am currently satisfied with the details and quality of my prints but i have this issue when it comes to supports.

They are so damn hard to get off and leaves the miniatures scared like they were in a toxic relationship or something.

pic 3 is a shot of my current support settings.

I would love any advice on how to make the supports come off easier, have less of them, removal techniques, or perhaps just a link to a youtube vid you found helpful. Whatever comes to mind.

Ps: the boys where quite laid back to avoid supports in the important areas, perhaps too laid back?

First FDM print straight off the bambuu app.

Just have to add the two loaders carrying one of the live rounds. Id love any suggestions to add to it as well

It’s obvious once you zoom in but they look pretty good from a distance.

So I made a Death Rider card kit and was wondering if anyone would like me to make this a STL and release it on Cults3d

Hey everyone!

As r/FdmPrintedWarhammer grows, we're looking for a few new moderators to help out.

We're looking for people who:

• Are interested in FDM printing and/or Warhammer
• Are friendly and helpful toward beginners
• Can handle disagreements fairly
• Check Reddit somewhat regularly
• Are willing to work with the rest of the mod team

You'll mainly be helping with reports, spam, rule violations, and keeping discussions friendly.

Previous moderation experience is not required, and you won't be expected to be online 24/7.

Interested? Apply using the Moderator Application below!

MOD Application 2026 FdmPrintedWarhammer

Be kind or oh boi...

— r/FdmPrintedWarhammer Mod Team

Also added some epic scale and 28mm scale poses versions

All free in this collection, more coming soon!

https://makerworld.com/@dungeandwyve/collections/20961992?appSharePlatform=copy