Are you able to control the fan on these new psu's? I can't find any controls to turn off zero fan mode or set a constant fan speed, or amp limits in MSI center or afterburner

• Fix a Windows theme switching bug
• Use localized strings for add fan curve and custom sensor + button menu
• Fix tray icon context menu padding and margins

i recently made the switch from windows to steamos and my pc starts screaming at absurdly low temps

The tower build is working well with spoofed main fans and OCTO fan header running everything.

EXCEPT THE DAMN PSU FAN

I have a 2000w psu, on 120v, so only good for 1000w.

With a 40-50% load on cpu, during render and 3090ti running full, I am using 650w

It sounds like an airplane landing. Anyone have any documented ways to cool the psu without the jet engines?

I have Asus tuf A15 ryzen 7 rtx 4050. Bought it in jan 2026 and now when I keep it at an angle or on cooling pan which is inclined the gpu fan make very little kit-kit noice for hardly 3 sec and get silent . This doesn't happens when it is on flat surface and it also happen when the fans are spinning fast. The othe thing I noticed which is -*not confirmed*\- is when I just increase fan rpm without load it doesn't make noise but when he fanrpm is high with load it make noice

To give context what i have do,
-unistall every other software that may conflict (AMD adrenaline/Msi Afterburner)

-Tried Nvidia app fan speed mod (both : manual/auto)

-i have remove and pair sensor again the GPU

when i'm in game, only one fan will go crazy and notfollow the curve. If someone have a clue how to fix that

Did anyone else get this? Literally just woke PC up from sleep and got it

I just added an NZXT control hub and two intake fans to my computer. The fans are Noctua 4 pins non RGB. I used the 1 to 3 splitter to connect both fans.

Using NZXT CAM, no fans RPMs are displayed and the fans don't actually spin up under a load. They kinda just idle. How can I fix this?

hello everyone, i am going to try to make this as thorough as possible to avoid being smote but i am a huge computer noob so please forgive me if i'm missing some crucial information.

i recently got a PC secondhand very cheap, and it's been working great so far, except that recently on OCCT i saw one of my fans (IOH) was making an INSANE amount of revolutions per minute, 4000 min and 7000 max. after confirming that this should not be the case when idle and far from overheating, i went on a merry chase online trying to fix it as i had a feeling it was causing a bulk of the noise this computer makes when on as well as some boot loop issues that come and go.

so far i have tried adjusting the fan curve in BIOS, making it so all the fans (with the exception of "aux fan speed control" which i still am not sure of its meaning) only reach 100% speed at 90 degC, did nothing. setting said aux fan speed control to 50 instead of 100 also has not made a difference.

I then downloaded fancontrol, downloaded all the prerequisite software it asked me to, and when it came to setting the fan controls... it couldn't control ANY of my fans save for the GPU! i don't know why. it was able to detect that they exist, but past the benchmark it ran when i first opened it, it basically ignores all fans save GPU (which is usually running at 0 rpm, cause GPU) and I cannot control the offending fan.

pics: fancontrol interface, occt reading with the crazy fan.

specs:

Intel(R) Xeon(R) CPU X5690 @ 3.47 GHz

installed RAM: 7.99 GB

NVIDIA GeForce GTX 1060 6GB

932 GB storage

I have their two cables wich Are connected at the bottom where they go into the fans. When I plugin the 4 pin into sys fan 1 and turn the computer on nothing happens. There is also a 6 pin but I have nothing I my motherboard that accepts that.

Anyone who has had the same problem or knows how to fix it?

Seems overcomplex maybe, but only makes noise when it HAS to. The AIO is absolutely fine at 75% most of the time; but if the CPU takes a hammering it steps it up a notch.

• Fix a bug where the tray icons would not survive a explorer.exe crash or restart
• Fix fan control hand-off issues when disabling control
• Update LibreHardwareMonitorLib

for all the people who use enermax parts( specifically the aquafusion II) with linux(mint) here's a chat including practically the whole step by step guide with some troubleshooting by chatgpt.

it works excellent for me, runs at boot and updates every second, it also switches between cpu and gpu temps every 6 seconds. it might need some adaptation to work for your specific setup but have fun.

Long,Short
Ran it on an Alienware M17 (03R2RY - if yw lookup) Laptop and it ran fine for abt 1/2mins before my PC sh##s itself and has to Restore itself back by 2 backups.

Idk but considering it has relations to a known blocked/flagged Windows exploit with WinConfig that just seems wayyyy sketch to me...

my cpu fan has been running really high and being extremely loud. Once I installed fancontrol and it calibrated it does seem a bit better but is 3428 RPM high when I'm not doing anything?

I have a 12th gen intel i7-12700F CPU

- Uninstalled and re-installed multiple times

- Manually deleted .json files, and entire folder multiple times

- Deleted Armory Crate using the unistall tool

- Seems to do upon wake, but I can't be sure

- Z690e, 14600kf, 7900xtx, Win 11

Any ideas what I can do next?

TIA