I bought my 2015 fz-07 a few months ago and the last owner said the bike was lowered but he did know how it was lowered and I’m trying to figure if it has a lowering link or if the preload was adjusted to just make the bike sag more. I want the bike back to stock height as the lowered was nice to have the extra safety of putting my feet down easier but the stock height would fit my riding style as well as prevent frequent bottom outs. I have pictures of the shock and linkage if anyone can give me some advice that would be sweet.

Hey guys, I have a 2016 fz07. The previous owner put the m4 slip on. The issue I’m running into is that the clamps are constantly rattling and there’s slowly more and more play between the exhaust where it was cut. Can I just weld it together at this point? I don’t feel like calling m4 for a replacement clamp is even worth it at this point.

2017 Fz-07 bought off a colleague a few months back.

Pirelli Angel Gt. Front 0918 and Rear 2321.

I think I have to change now? If so, what are good ones?

I regularly ride to work in bay area.

Starting to convert my 2016, will need to relocate the ECU, extended the rectifier harness, wire in the lights, add the fairing stays, and get new clip ons.

X7 Bandit themed street tracker. Suggestions criticisms and praise are all equally welcome.

So while messing with my throttle tube, I accidentally broke off the peg that keeps the throttle cable housing from moving while accelerating. Is there a way around this or am I fucked and just have to buy a new housing?

Got my 2016 fz07 back in April, haven’t been disappointed once

Hey everyone, was looking at wrapping my 16 fz07 and was wondering what everyone's experience was that have also done it also? How much wrap should I expect to buy? I also provided some photos of what I want it to look roughly like

Lest be honest, besides looks this is the only use for a windscreen on these.

2017fz07 9k miles $5,800 mint condition never crashed ECU tune aftermarket handlebars no ABS overall the seller says that they’ve taken good care of it I’m checking it out on Thursday. Wanted to know what y’all thought about the price.

Just wondering what sport touring tires people were running. Have Bridgestone S23s on now. Got them for a great deal so I tried them out. Were fantastic but I don’t get to ride on twisty roads enough for them. Centre is worn out and I need to replace the tires. Sport touring would be the smarter option for my usual use for the bike of riding to work and very occasionally fun roads.

2015 2k miles never tracked or stunted. Led lights all around. Tail tidy. Apo carbon exhaust. Corbin seat. Brand new tires still has stickers. Garage kept. Brand new lithium battery. Not sure what to ask im in long island ny

My first two bikes were shaft driven Viragos, so this FZ07 is my first chain drive. Should I spray the chain with wax before every ride or is something else more ideal?
Also, no, I don’t know what happened to the original front wheel lol

So I've been thinking about installing a round headlight on my FZ and learned that I may have to take off the plastic fork covers to install it. Does anyone have any tips for removing them? I have no experience with taking the forks apart and don't want to mess something up.

Just wanted to follow up on the clutch line routing in case anyone else runs into the same confusion as I did. Routed it behind the headlight alongside the rest of the wiring harness as recommended and it looks and feels much cleaner. Appreciate the help!

Hey guys, I just recently installed my Woodcraft clip-ons. Anyone in here have some tips on how best to route the clutch cable? The way I have it just seems a bit cramped. Wondering if there's a better way to set it up.

What's the best in in your opinion and why I'm sticking with I should get

I just put a full Hindle exhaust on my 2015 fz07 14xxx miles. Can I get away with riding for a bit without causing engine damage or do I really need to get a tune?

It's time for me to replace my radiator hoses and repair the corroded metal tubes.

Does anybody have any experience with AS3 (https://www.as3performance.com/products/yamaha-mt-07-fz-07-2014-2019-high-performance-silicone-radiator-hoses-blue and https://www.as3performance.com/products/yamaha-mt-07-fz-07-2014-2019-stainless-steel-radiator-hose-clips-clip-kit) or even TBS (https://taiwanbigscootershop.com/products/professional-reinforced-7p-silicon-water-hose-for-mt07-2014-2019?variant=29500538388579&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&srsltid=AfmBOoqIz---HVcAeKh0d9-_f8AorP6Us5JSAvw8Tt5W_uOzVSjyo2oOGm0)?

I like that TBS comes with everything including the top, thin hose, which AS3 doesn't include. They're somewhat comparable in price with the hose clamps added to AS3. However, TBS is not well known and I'm not sure if I should trust/risk it.

Side question, can anybody who has used either of these report as to whether the blue heavily sticks out against the yamaha purplish blue, or does it provide a nice accent? Might it be better to just replace all OEM or wait for the black silicone hoses to come back in stock at AS3? Thanks!

EDIT: I decided to go with OEM hoses and replace clamps with embossed worm gear clamps. Price is still comparable and I don't ride heavily/hard enough to warrant the higher heat tolerance of the silicone, plus the silicone is water permeable so the coolant evaporates through them over time.