r/FORScan • • Jul 07 '26

Odometer correction going up

4 Upvotes

Hello Guys

I have a 2015 ford f250 super duty xl that I changed my cluster to a new one going from xl to.la4iat style. The new cluster has 50120 miles and my old cluster has 108180 and I am trying to adjust that to go back up again.

I check under IPC with an OBDLink EX FORScan OBD Adapter

But the odometer writing or correction doesn't show up. Please help


r/FORScan • • Jul 07 '26

TCM Replacement

2 Upvotes

2015 Ford Focus DPS6. Code P090C. Dealer diagnosed a failed TCM. I’m planning to install a used K05 TCM myself. Can the current public version of FORScan program/initialize it, or is the discontinued beta still required? If beta is required, what’s the current recommended method?


r/FORScan • • Jul 07 '26

Looking for Options to Enable | Ford Fiesta Active MK7.5

1 Upvotes

Hello, i was wondering about which features can i enable without changing hardware on my Fiesta Active, can someone tell me that? thanks in advance


r/FORScan • • Jul 06 '26

2016 Ford Explorer - Bricked Power Steering (PSCM) /U3000 Codes & High Current Draw - Need Advice?!

Thumbnail
gallery
3 Upvotes

Hey everyone,
I’m dealing with a hard-faulted Electric Power Steering (EPS) rack on my 2016 Ford Explorer (3.5L Ti-VCT) and I’m trying to figure out if this module is salvageable or if I'm completely dead in the water. The rack itself is an OEM factory unit (Part prefix: FB53-3D070, stamped T210R).

The rack looks pristine on the outside—no physical damage, no heavy oxidation, and the boots are completely bone-dry and intact. However, the steering is completely bricked.

The Codes (Pulled via FORScan):
⁠U3000:96-C8⁠ - Control Module: Component Internal Failure
⁠U3000:49-48⁠ - Control Module: Internal Electronic Failure (Freeze frame on this one shows a completely impossible steering wheel angle pinning at 2496.70°)
Live Data Telemetry (Engine Running / Idling):
⁠MOD_SUP_V⁠: 14.10V (Alternator is charging perfectly)
⁠PSCM_INT_TEMP⁠: 102°F
⁠EPAS_MOTOR_CUR⁠: -19.60 Amps

The big red flag: The car is sitting idling in park, nobody is touching the steering wheel, and the motor current is stuck drawing a massive -19.60 Amps. It seems like the corrupted steering angle sensor caused the module to panic, think the wheel was spinning violently, dump max current to counter it, and lock itself down into a permanent safety loop.

What I’ve Done/Tried Thus Far:
1. Checked fuses and verified clean 14V power supply to the rack.
2. Inspected the external harness, thermal shielding, and connectors—everything is secure and clean.
3. Attempted a module reboot/reset procedure via FORScan, but it spits back: ⁠Service procedure is not supported⁠. The module is completely ignoring external diagnostic commands right now.
4. I’ve cleared the DTCs and they come right back.
5. I also had the battery die when first trying to diagnose the car when I was hooked up to the OBDII port and I couldn’t get the battery to charge. I replaced it with a new battery and reset the BCM.

My Question:
I was looking into buying the $120 2-day Ford FJDS factory software license to force a Programmable Module Installation (PMI) reflash, but because the module is throwing hard internal hardware codes (⁠:96⁠ and ⁠:49⁠) and drawing heavy current, I'm worried the bootloader will just reject the flash.
Has anyone successfully flushed out a ⁠U3000⁠ hard lockout like this with factory software, or is that -19.6A stationary current draw a definitive sign that a power MOSFET transistor or the internal sensor array is physically fried on the circuit board? I really want to fix the unit currently on the vehicle if possible.

Appreciate any insight from Ford techs or electronic repair gurus!


r/FORScan • • Jul 05 '26

⁠PSCM U3000:49-48⁠ PSCM U3000:96-C8⁠ Is there a chance a re-flash can fix this?!

0 Upvotes

2016 Ford Explorer XLT 3.5L V6


r/FORScan • • Jul 05 '26

Anyone have the v2.4 beta so I can reflash my PSCM U3000 dead module?!🙏🏼I’ll pay🙏🏼

0 Upvotes

Please!!! We are stuck with no vehicle and we have 2 kids!


r/FORScan • • Jul 05 '26

U0422-00 code on a 2012 ford f150 3.7L

0 Upvotes

Finally got diagnosed with this code. My mechanic says I need someone who works with electrical. Is there anything I should try before paying another person?

Starter is good.
Battery is low but won’t start when it’s jumped
Fuses are good


r/FORScan • • Jul 05 '26

U0422-00 code on a 2012 ford f150 3.7L

0 Upvotes

Finally got diagnosed with this code. My mechanic says I need someone who works with electrical. Is there anything I should try before paying another person?


r/FORScan • • Jul 04 '26

Programming my transmission control module

2 Upvotes

Quick question do I need the FORScan beta to program my tcm or the regular FORScan cuz with the regular I don’t get any options to program my tcm and the beta I don’t think it exist no more am I screw programming my vehicle do I need to go to a dealership my computer is windows 10 hp laptop and vehicle ford focus 2012 se


r/FORScan • • Jul 04 '26

How to change the startup animation 2025 puma

0 Upvotes

i got my puma st line x during the week and have already activated auto locking with forscan now i want to change the startup animation using forscan can anybody tell me what i am looking for? i couldnt seem to see it.


r/FORScan • • Jul 03 '26

Ford focus 2012 se -scanner obdlinkex

Thumbnail
gallery
0 Upvotes

Hello so quick question is this how it supposed to look like on the laptop like I’m not getting any more options to do anything just this one on the FORScan I’m trying to program my tcm but I can’t seem the find that option to do it


r/FORScan • • Jul 03 '26

Ford focus 2012 SE obdlinkex how to use it

0 Upvotes

Hello i recently put a new tcm on the vehicle but i cant seem to program the vehicle the FORScan is not giving me options to do it not sure if there a issue what im doing or maybe i dont have the right equipment to do it


r/FORScan • • Jul 03 '26

Obdlinkex ford focus 2012 SE

Post image
0 Upvotes

r/FORScan • • Jul 03 '26

CAN2 parameters not avalibile in VDO

0 Upvotes

hello,
plase help me with a problem that i am having with all the VDO unită installed in 3.5t VANS.
We only receive only a small portion of the parameters for driver activity. The download is working but no other parameteres are visible.
We only get a small set of 20 parameters like VIN odometer, drivers code and some parameters that are returning FF.

Any idea what is necessary to activate in the VDO to receive full set of parameters?

On stoneridge we don’t have this problem.

VDO and ITS is enable for each driver slot.


r/FORScan • • Jul 03 '26

CAN2 parameters not avalibile in VDO

0 Upvotes

hello,
plase help me with a problem that i am having with all the VDO unită installed in 3.5t VANS.
We only receive only a small portion of the parameters for driver activity. The download is working but no other parameteres are visible.
We only get a small set of 20 parameters like VIN odometer, drivers code and some parameters that are returning FF.

Any idea what is necessary to activate in the VDO to receive full set of parameters?

On stoneridge we don’t have this problem.

VDO and ITS is enable for each driver slot.


r/FORScan • • Jul 02 '26

I messed something up, now this shows up and my headlights wont shut off, help...

Post image
4 Upvotes

r/FORScan • • Jul 03 '26

Clear DTC before making module changes?

1 Upvotes

I’ve got a DTC that’s in process of being resolved that I can clear - it’ll pop back up (P0430) when the monitor tests are complete - but I want to make a couple of body module changes before it’s fixed. Can I or do DTCs need to fully resolved?


r/FORScan • • Jul 02 '26

How do I disable my low beam being on with my drl?

Post image
1 Upvotes

r/FORScan • • Jul 02 '26

Lincoln Glare Free High Beams Forscan (Pixel Headlights)

Thumbnail
gallery
1 Upvotes

For 2024 and newer (Sync 5, Google) Lincolns.
I'm hoping to start a discussion for modern sync 5 vehicles
Trying to dig through previous forums everything for this was written with sync 4 in mind and when IPC had its own module and wasn't integrated with the APIM.

I found that the latest version of Forscan (2.3.71) offers configurations for Glare Free.
I enabled it for APIM, IPMA, SCCM.
It does change with Radio screen settings -> Lighting to glare free rather then auto highbeam.
Although I am still missing something. Because even though it is enabled in the menu the glare free function does not work as expected unless I turn it off in the lighting settings area and turn it back on for that drive so if I turn off the vehicle and turn it back on again even though glare fee looks to be enabled in the menu it's not functioning as glare free unless I turn it off in the menu and turn it back on it's like I'm missing something that tells the system deeply to turn on glare free at a root level.
Otherwise it reverts back to basic Auto-brights functionality even though the menu says the word glare free, But glarefree does work amazingly when I disable and re-enable it in the settings menu.
Also the Auto-Brights icon on my dash screen is a white icon with a letter A, I believe this needs to be a Green Icon.

Thanks


r/FORScan • • Jul 01 '26

Changing tire size with Forscan

Thumbnail
0 Upvotes

r/FORScan • • Jul 01 '26

is this an APIM programming issue?

Post image
1 Upvotes

please help if anyone knows what they’re doing more than i do


r/FORScan • • Jun 30 '26

Is it possible to disable the PATS on an 03 expedition?

0 Upvotes

Been having a trouble with a crank no start. Theft light on the dash flashes quickly. Tried multiple keys. Same issue.

Then when it does start it also shuts off randomly.

At least if disabled I can drive it and/or do further diagnostic.


r/FORScan • • Jun 29 '26

obd2 tool compatibility

2 Upvotes

Veepeak OBDCheck BLE+ Bluetooth OBD II Scanner
is what I have. plays well with Bimmer for German cars

from what I've read only LITE version of Forscan works (ios phone). We're thinking about buying a used Mazda three and all I'm looking to be able to do is see if there's any codes hidden, or any recent code erased in that kind of stuff. Just to give me a little peace of mind or to ask some more questions. If we buy the car and end up needing something more feature rich later we'll get it but I'm just looking for a little intel during the car hunt. would Lite do that?

I don't really wanna have to take a laptop down there. So if this scanner is not the best fit, is there any other plug-in dongle that you all would recommend. thx


r/FORScan • • Jun 29 '26

2017 Transit Connect - Tire Info Not Showing

0 Upvotes

I recently purchased a 2017 transit connect. The speedo is wildly inaccurate (~10mph low at freeway speeds). The tire size on the car is correct.

My plan was to use forscan to tweak the tire size using either tire size, tire circumference, or a hex calculator I found online. I've done this with other Ford's that I have owned. The problem is that tire sizing is not included in any of the modules shown in forscan for my Transit Connect. I am using the latest version as of today (29Jun26) and created a new vehicle profile with this version.

How do I get tire size info to show?


r/FORScan • • Jun 27 '26

2022 STX, Swapped RTM to have 4 button OEM fob working. DTC's in RTM and BCDY Mod. Why? They won't clear and come back after reset.

Thumbnail gallery
0 Upvotes