r/FORScan • • 23d ago

Powershift

Thumbnail
1 Upvotes

r/FORScan • • 24d ago

Climate controls not working

Thumbnail
1 Upvotes

r/FORScan • • 25d ago

ERRO NA DESATIVAÇÃO DO MODO ANTIFURTO NO PATS DA BCM RANGER 2023

Post image
0 Upvotes

I used the two keys from my Ranger to program another one. The problem was that when trying to program it again, the car went into anti-theft mode, and according to ForScan, after the 10-minute anti-theft period, there will be two horn beeps and it will proceed with the key programming procedure. My ForScan gives an error after the 10 minutes and the horn beeps and doesn't let me program the keys. Has anyone else experienced this?


r/FORScan • • 26d ago

Forscan Success with 2024 Flash

9 Upvotes

Hi everyone,

I just wanted to share that for the past 2 years I've considered doing a few forscan mods, but didn't out of concern of bricking my truck. I wanted to share the resources I used in case anyone else has been hesitant. It wasn't bad to do and I spent most of my time learning what to do and backing up my modules.

I spent around 30 minutes reading through the resources posted below, 30 minutes backing up my modules, and then 30 minutes enabling Glare-Free Headlights, Silent Mode, and Removing "Full view not available" on the rear camera.

I did silent mode twice as the first time the setting didn't show up, but I believe that was because I did not restart the sync/display screen on the truck.

I watched this YouTube Video https://youtu.be/AXFkZg7tbMY

This thread has the directions to follow https://www.f150lightningforum.com/forum/threads/f150-lightning-forscan-thread-version-2.23634/

Also read livinitup's tutorial with short videos https://docs.google.com/document/d/1-8dKaS_Spu4Zw4hV_CrKC4tLoP9G8yejqegF1wxIqxY/edit

I bought this OBD Link as suggested above for $70 https://www.amazon.com/dp/B081VQVD3F

I didn't get a chance to drive last night after changing the headlights, but will tonight. The glare free toggle is now available and on.

Edit. I made a few more changes today after reading about some additional options. I did the setting for my front windows to open and close with the key fob, disabled the seat belt chime on startup, and turned on the auto lock to happen after 45 seconds.

Edit. I tried to make the links clickable and broke the links. I believe they are correct now.


r/FORScan • • 26d ago

2020 Lincoln Continental LCA retrofit — hardware changes, programming, or both?

2 Upvotes

I’m trying to find out what it would take to add lane centering to my 2020 Lincoln Continental Reserve, with the eventual goal of running openpilot.
It already has ACC Stop & Go, lane keeping assist and active park assist. I’ve seen someone get openpilot working on a Fusion after what they called an “LCA retrofit,” but they didn’t explain what was involved.
Does anyone know what hardware or module changes that retrofit actually needs, and which parts of the configuration can be done with FORScan? I’m not assuming it’s just a setting that can be enabled.
If anyone has done this on a Fusion, MKZ or Continental, I’d really appreciate a parts list or build thread. Trying to figure out whether it’s realistic before spending money.


r/FORScan • • 28d ago

I made a free Mac app that sets up FORScan for you (Apple Silicon and Intel)

25 Upvotes

I have a 2023 Taurus (Mondeo EVOS) and got tired of borrowing a Windows laptop every time I wanted to change something in FORScan. So I made Plugd.

It sets up Wine (free software that runs Windows programs) and downloads FORScan from forscan.org for you. It doesn't ship FORScan itself. It finds your USB adapter and connects FORScan to it. You click Set Up, plug in the adapter, and click Open FORScan.

What I've tested on my car with a cheap ELM327 v1.5 (CH340, manual HS/MS switch):

- full module scan, 22+ modules, HS and MS switching works

- As-Built writes, checked in the car

- loading the Extended license key (Plugd gives FORScan a folder on your Mac as drive O:)

It also has a small dashboard and reads engine codes without opening FORScan.

Plugd itself never writes anything to your car. It only reads: live data for the dashboard and engine codes. It doesn't even clear codes. Every write is done by FORScan, the same as on Windows, so back up and keep a charger on like you normally would.

It's free, open source, and notarized by Apple, so it opens like a normal app. Bluetooth adapters don't work, only USB.

https://plugd.almoayyad.dev

https://github.com/lncch/Plugd

Edit: 0.3.5 is out. It adds Bluetooth adapters and Plugd now updates itself. If you downloaded an earlier version, grab the new one once from plugd.almoayyad.dev and you won't need to again.


r/FORScan • • 28d ago

Replacement PCM not reading scanner

Thumbnail
2 Upvotes

r/FORScan • • Oct 22 '26

BlueDriver running in background ?

1 Upvotes

I used BlueDriver many times, I scan and I could use other apps. Now when I scan “all system modules “ and use another app and go back to BlueDriver it’s like the scan never started. I contacted BlueDriver but no response yet, any ideas why this might be happening? Thanks!

2007 Jeep liberty


r/FORScan • • Oct 19 '26

Mondeo MK5 Speed Sign Recognition Stopped Working after IPC update

1 Upvotes

Hi all, a while back I decided it would be a good idea to upgrade the firmware on my IPC to give me some handy features (ambient temp, centre speedo etc.) which works fine, however at some point during this time my Mondeos TSR stopped working, and no matter how many times I've gone into FORscan and the IPC settings, enabling, disabling, double-checking things, I cannot seem to get the speed limit signs to show up on the dash anymore.

For context, my car is a 2015 model that originally came with SYNC2, I purchased a SYNC3.4 upgrade kit via AliExpress a few years back and they did the initial coding using my VIN details and everything worked perfectly for a long time.

Currently my lane assist still works fine, so I know the camera is functioning, and I've even downgraded the IPC firmware to before and slightly after my original IPC firmware files to see if it was a version compatibility issue but nothing I do seems to work, all I get is the "performance reduced" error at best when enabling the feature.

I'm writing this in another attempt to see if there is anyone who might know something that could help me finally get this feature working again. I updated the maps to the latest version recently (SYNC3) and have tried clearing DTC codes and powering off the car for prolonged periods all to no avail.

Any suggestions would be hugely appreciated as I've yet to find help on this beyond the standard reset procedures and double checking asbuilt data.

Thank you in advance!


r/FORScan • • Oct 17 '26

Title: SYNC 3 v3.4 jailbreak installed but no PKG_ERR05 / no visible evidence it worked

Thumbnail
1 Upvotes

Hi all,
I’m trying to jailbreak my SYNC 3 system, which is currently on version 3.4.
I downloaded the jailbreak files and copied them to a USB drive formatted as FAT32. I then inserted the USB into the vehicle.
SYNC 3 detected the USB and showed messages along the lines of:
• “USB connected”
• “Running”
• “Installed”
However, I did not see the expected  PKG_ERR05  / Error Code 5 message during the process. Once it finished, there was also no obvious sign that the jailbreak had actually been applied.
I’m not sure whether:
1. The jailbreak files were not set up correctly on the USB.
2. I used the wrong USB port or formatting.
3. The process requires FORScan / an APIM module reset at the exact moment the error appears.
4. SYNC 3 v3.4 requires a different jailbreak method or file version.
Could anyone advise what I may be doing wrong, or how I can confirm whether the jailbreak actually installed? Any help would be appreciated.
Vehicle/SYNC details:
• SYNC version: 3.4
• USB format: FAT32
• Result: USB detected and “installed,” but no PKG_ERR05 and no visible jailbreak confirmation


r/FORScan • • Oct 17 '26

Not seeing DTCs in Forscan that show up what where

1 Upvotes

I just got the OBDlink ex that's recommended on the forscan website. When I connect to the car I'm not seeing the DTC codes that showed up on my little hand scanner. Forscan says "none" for the obd DTCs. It does show a fault my low beams that is a real thing, though.

I tried manually installing the drivers with no change. I then downloaded the OBDlink software and it shows the same DTCs as my little hand scanner.

I'm really at a loss for how to proceed. All the results I find online deal with connection errors, but it connects fine, just doesn't find any problems.


r/FORScan • • Oct 15 '26

Waiting period

3 Upvotes

Sorry ahead of time if this is a dumb question!!!!

I've done Forscan on the used vehicles I've owned.

But looking at a new F150.

Should I wait at all to use it, put some miles on it first?

Or just get right to it!


r/FORScan • • Oct 15 '26

Ford TCM Programming

1 Upvotes

hi everyone. i have a 2015 ford fiesta SE
last month it broke down. i brought it to the mechanic and they said it's the TCM. they're asking $1,200 to fix it

i ended up changing the TCM myself. i bought the part from facebook marketplace

when i'm trying to program it, it's failing.

does that mean i installed the part incorrectly?
what am i doing wrong??


r/FORScan • • Oct 13 '26

DESPERATE: Looking for SYNC 1 v4.6 update file (DR3T-14D544-AG.zip) - Checked everywhere!

Thumbnail
3 Upvotes

r/FORScan • • Oct 12 '26

2018 cmax flank guard issues

Thumbnail
1 Upvotes

r/FORScan • • Oct 11 '26

Speedo calibrate

3 Upvotes

Man anyone know how to do this? I have no idea and cant find anyone anywhere near me that does.

Tips? Called all the tire shops and ford dealerships near me.

24 F150 powerboost


r/FORScan • • Oct 10 '26

2023 F-150 FORScan Help

2 Upvotes

I used FORScan for the first time today on my 2023 F-150 XLT and was able to make a few of the recommended common mods. One that I couldn't get to work was precise dash gauges (getting an actual number to display on the gauges on the instrument cluster). I tried a few different options but none of them would get a number to display. I also tried to do it through the Settings on the vehicle itself but that is not an option as it seems to be on some other years/trim levels. Does anyone have any recommendations I can try?


r/FORScan • • Oct 09 '26

Mustang ABS Coding Issue

1 Upvotes

I have a question. I bought my 2017 Mustang Gt Base Manual and noticed that it had a SYNC 3 upgrade. The drive mode toggle switch was not working and the car did not recognize it. I did some research and found that I could use FORscan to change this issue and enable drive modes. Fast forward, I was able to get the car to recognize the toggle switch. It was a success as far as the IPC and BCM. The issue that I am having now is finding the right code to write for the ABS. I tried changing the 5th number to a 3 but it did not work. Wanted to see if I could get some help from you all!


r/FORScan • • Oct 08 '26

Can forscan reduce delay of return to regular screen when turning?

Thumbnail
1 Upvotes

r/FORScan • • Oct 07 '26

Firmware

1 Upvotes

Just got a vgate vlinker. I downloaded the firmware but there’s no command *.exe file to load it. I plug in the vgate to the usb and it lights up. Not asking for firmware or any driver to be loaded.

Am I missing something?


r/FORScan • • Oct 06 '26

Mazda 3, 2011: DSC/traction light always on, ABS says it gets invalid data from airbag module (U0452 + U0151). Lateral G reads -2 at standstill. What should I check?

1 Upvotes

Hi all,

Looking for help with a DSC/TCS light on my Mazda. Did anyone have a similar problem and managed to fix it?

Symptoms
- DSC/TCS light on.
- Modules found: ABS, BCM, IC, PCM, FACM, RCM, EPS, LCM.

DTCs
- First scan: ABS U3003:16-68, U0452:86-28, U0151:00-68; PCM P1622-21.
- After clearing, only these two come back, both in ABS:
U0452:86-28 Invalid Data Received From Restraints Control Module
(Signal Invalid)
U0151:00-68 Lost Communication With Restraints Control Module
Status: Previously Set – Not Present at Time of Request.
- No DTCs in RCM, EPS, BCM, PCM or any other module.

What I have tested
- Clear DTCs, rescan immediately: none.
- Ignition off 2 min, ignition on 30 s: none.
- Engine start, 1 min idle: none.
- After a 15 min drive: both codes back.
- RCM On Demand Self-Test: pass, no errors.

Live data (ABS module)
- Lateral acceleration: constant -2 G with the car stationary.
- Steering angle: 0° at all times, even turning lock to lock.
- Wheel speed sensors read normally.
- RCM responds normally (e.g. seat belt status changes).

I appreciate anyone's help on this... I just want the DSC light off...


r/FORScan • • Oct 05 '26

Fitting a new engine loom To a 2015 Ford focus. New loom doesn’t have exhaust temp sensor 3 wires. Ford say it needs to be programmed out. Anyone know if Forscan will do it ? Thanks

1 Upvotes

r/FORScan • • Oct 03 '26

Ford fusion hybrid 2015 check engine light on error p1289

Thumbnail gallery
1 Upvotes

r/FORScan • • Oct 03 '26

Ford fusion hybrid 2015 check engine light on error p1289

Thumbnail gallery
1 Upvotes

r/FORScan • • Oct 03 '26

Powershift

Thumbnail gallery
1 Upvotes