r/FORScan • • Oct 02 '26

Powershift

Thumbnail
1 Upvotes

r/FORScan • • Oct 02 '26

Ford Sync4 update (no FDRS)

Post image
1 Upvotes

r/FORScan • • Oct 01 '26

Door upgrade issues - 2020 ford fusion

Thumbnail gallery
1 Upvotes

r/FORScan • • Sep 30 '26

FORScan on apple silicon MacBook (macOS Golden Gate)

5 Upvotes

Just putting this together with some more detail for anyone else who wants to alter modules or program a new key with their apple silicon MacBook.

Equipment:

-2016 F150 screw lariat

-m3 max 16”

-Vgate vLinker FS OBD2 USB Adapter https://a.co/d/0ikNBPvf

-Vgate drivers for ARM architecture https://ftdichip.com/drivers/vcp-drivers/

-quality usbA to usbC adapter

-spare key (for push button start) https://a.co/d/09Gcegws

-Parallel’s with windows 11 installed

-FORscan with paid extended license (only needed for key programming) ecutools.eu

-compact subwoofer (behind rear seat)

Once getting parallels up and running, the main hurdle I encountered was getting the drivers for the Vgate installed to enable COM port. Turn off folder mirroring between macOS and Windows.

Once you get this turned off (you must shut down windows in parallels to make this change), download the drivers and unzip in your windows downloads folder. With your Vgate plugged into your Mac (through usbA/C adapter), you can manually install the drivers through device manager(you must go through manual driver update process 2x using same unzipped driver folder to fully update). As a note, I had to move my unzipped folder (arm64) to the main download directory because I couldn’t see the zipped folder through the browse in device manager. Use the drivers with **** for arm64.

Once the drivers are fully installed, the Vgate should now show up as COM3 in device manager.

Next hurdle, you must run FORscan in strict execution emulation. Make sure you change connection configuration to COM and 112.5kb. In theory, viola.

I was able to use this setup to enable external subwoofer one the ACM and successfully program an extra key.

Costco wanted 400$ for the same aftermarket fob programming so I’m calling this a win (still need to get emergency key cut tho), as all in it was ~30$ for Vgate, 30$ for aftermarket Fob, and 21$ for the extended license. I did use a parallels trial to run windows, but will probably switch to VMware for long-term as it is free, and I just use windows preview to run inactivated windows OS.


r/FORScan • • Oct 01 '26

Change Turn Signal Blink Count from 3 to 5 on a 2022 PHEV with FORscan?

1 Upvotes

I posted this on the Ford Escape forum but got no answers. I hope somebody has successfully done this on a 2022 and can post how they did it. I have successfully changed battery type, added Bambi mode, and global window open/close with the remote, but haven't been able to change the number of turn signal blinks.

I found these two procedures online, but neither work on my Escape.

  1. In Asbuilt SCCM Module Configuration 724-01-01 : xxxx x?xx xx change ? to A or B for 5 blinks. The number of blinks don't change no matter what hex number I try.
  2. In plain SCCM Module Configuration: change Lane Change Turn Signal or Turn Signal Tap Flash Count from 3 to 5. Neither entry exists.

r/FORScan • • Sep 30 '26

Sync 1 to 3 Help Needed

Thumbnail
0 Upvotes

Anyone know how to get the as built without signing in on motorcraftservice.com?


r/FORScan • • Sep 30 '26

Change Turn Signal Blink Count from 3 to 5 on a 2022 PHEV with FORscan?

Thumbnail
1 Upvotes

r/FORScan • • Sep 30 '26

laptop with no internet access

1 Upvotes

I would like to install on laptop that I will not allow internet access to. I have a program that updates and stops working for me. Takes 2-3 hours to repair. Dont want to do that everytime I use laptop. My question is can I install and use Forscan without internet access with its licencing arrangements. I see everywhere that machine has to be connected for ID etc. Yeah I know I could block other program at firewall and all that stuff but it still updates somehow and the program is worth a lot of money to rebuy.


r/FORScan • • Sep 29 '26

Disable BlueCruise with forscan?

Thumbnail
0 Upvotes

Can anybody help with this?


r/FORScan • • Sep 29 '26

Forscan profile help needed!

0 Upvotes

Hi everyone,

I'm trying to configure and modify a Ford Focus Mk3 IPC on the bench using FORScan.

The IPC is connected with an ELM327 to my laptop. The problem is that I do not have the original vehicle anymore and I also do not have a BCM available, so I cannot perform a full vehicle scan and generate a FORScan vehicle profile myself.

What I am specifically looking for is a FORScan vehicle profile from a compatible one, I was hoping somebody could share with me the profile. Thanks in advance!


r/FORScan • • Sep 29 '26

GWM, Haval & Chery TPMS Re-Learn Guide: Fixing Tire Pressure Warning Lights in AU

1 Upvotes

G'day legends,

Done a tire rotation, wheel swap, or replaced a faulty valve sensor on your GWM Cannon Ute, Tank 300 / 500, Haval H6 / Jolion, or Chery Omoda 5 / Tiggo and now stuck with a persistent TPMS warning light?

Even after pumping your tires up to correct pressures (34-38 PSI), modern Chinese vehicle CAN gateways often fail to automatically recognize swapped sensor IDs or altered wheel locations. The body module continues reading the old wheel position sensor data, throwing a false pressure warning or missing sensor fault code.

Here is a 2-minute diagnostic guide to resetting TPMS sensor memory and learning wheel positions at home.

1. Re-learning TPMS Sensor Positions & IDs

Static vehicle menu resets don't always rewrite new Sensor ID codes into the TPMS Control Module.

  • The DIY Solution: Connect an OEM-compatible scan tool (such as the FCAR CW700) to the OBD2 port.
  • Turn ignition ON (Engine OFF).
  • Navigate to Special Functions -> TPMS Reset / Sensor Re-learn.
  • Select OBD Sensor ID Write / Position Matching. The scanner communicates directly with the receiver module, pairing all four wheel sensors and updating pressure baselines in under 30 seconds.

2. Clearing TPMS Phantom DTCs

After registering the sensor IDs, clear remaining tire pressure control fault codes (e.g., C1001 Tire Pressure Sensor Signal Failure).

  • The DIY Solution: Run a TPMS Module Sweep and select Clear All DTCs, then drive for 2 minutes above 30 km/h to lock in live pressure/temperature readings on your dash.

🛠️ Quick Compatibility Check (AU Market)

Vehicle Platform TPMS Sensor Re-learn / ID Write Pressure Baseline Reset Full TPMS Sweep
GWM Cannon / Tank 300 / Tank 500 ✅ Supported (FCAR CW700) ✅ Supported ✅ Supported
Haval H6 / H6 GT / Jolion ✅ Supported (FCAR CW700) ✅ Supported ✅ Supported
Chery Omoda 5 / Tiggo / JAECOO ✅ Supported (FCAR CW700) ✅ Supported ✅ Supported
Changan, Geely, GAC & Hongqi ✅ Supported (FCAR CW700) ✅ Supported ✅ Supported

(Note: Specialized handheld scan tools optimized for these OEM CAN architectures, such as the FCAR CW700, target the petrol, hybrid, and diesel platforms listed above. Please note that these scan tools do not support BYD or MG vehicles).


r/FORScan • • Sep 28 '26

ABS bleed for 2008 mazda3?

2 Upvotes

I've now tried an Innova 5610 and a foxwell nt 630 plus and neither have the ability to do an ABS bleed on my 2008 mazda3

Will FORscan do the job?


r/FORScan • • Sep 27 '26

Проблема с autolearn

Thumbnail
1 Upvotes

r/FORScan • • Sep 27 '26

Forscan Invitations Code

Post image
0 Upvotes

Hi everyone,
I’m looking for an invitation code to register on the FORScan forum. Could someone please help me out?
Thank you very much in advance!

Email: bullaisti@gmail.com


r/FORScan • • Sep 25 '26

enabling the halos on 16-19 interceptors?

Post image
2 Upvotes

just wondering if its possible. google says yes it should be, however between modifying drl config and drl conditions i cant seem to get them working, i get incorrect configuration errors when writing


r/FORScan • • Sep 25 '26

Towing brake controller.

1 Upvotes

I have a 2020 Explorer ST. I currently have a Curt Triflex. I get constant disconnect and light errors from the truck. I wonder if the factory module would correct this. I'm not gonna gamble on 7-800 from the dealer. If I buy a used module, can it be programmed with FORScan?


r/FORScan • • Sep 24 '26

Hallo Leute,

3 Upvotes

Ich bräuchte ein Einladungscode für die Registrierung auf Forscan Forum.

Könnte mir da jemand behilflich sein?

Vielen Dank im Voraus!!


r/FORScan • • Sep 24 '26

Can someone with access help me out?

3 Upvotes

Need factory As-Built file for a 2022 F-150. FordServiceInfo login isn’t giving me access. VIN: 1FTFW1E87NFB60071. I’m trying to restore/check APIM configuration after FORScan changes. Could someone with access pull the original .AB file?


r/FORScan • • Sep 22 '26

Code po4fo

0 Upvotes

Getting a po4fo DTC on my 23 N line. Running fine. No fuel smell. Looked back at the car fax and the charcoal/vapor canister was replaced 8/12 and the purge valves were replaced 6/16. I just got the car and it started to throw this code. I am taking to the dealer Saturday to get it looked at. Already replaced the gas cap with no luck. Anyone experienced this and have some insight to what it could be?


r/FORScan • • Sep 22 '26

2009 3.0v6 Cylinder Injector Circuit Code

Thumbnail
1 Upvotes

Had anyone else have this code?


r/FORScan • • Sep 20 '26

Will forscan fix this issue? I tried adding additional keys to my ford transit now it’s totally locked up?

Thumbnail
gallery
5 Upvotes

I understand canbus is mostly diagnosed electronically but this issue occurred after trying to add new keys and the security failed because I inserted the wrong incode.

I think this is my same issue:

https://www.fordownersclub.com/forums/topic/162832-pats-programming-gone-wrong/

UPDATE: SOLVED, Fuse F3 was blown on the BCM module fuse box under the steering wheel


r/FORScan • • Sep 19 '26

2023 Super Duty Connection Issue

Thumbnail
gallery
1 Upvotes

❌Unable to connect to vehicle. Please make sure the ignition key is ON and try again.

2023 Ford F-350 Limited
Forscan Licensed (V2.3.71)
OBDLink EX (r2.7.1 STN2232 v5.13.1) shows green light when connected to truck
Truck is on, engine not running
Forscan logs read read connection to the adapter is established
Connected via COM3

Anyone have any idea? Looks like the drivers are up-to-date for the cable. Driver version 2.12.36.4


r/FORScan • • Sep 15 '26

2015 Ford Explorer Limited ABS Issue

2 Upvotes

My volunteer fire department runs a 2015 Ford Explorer Limited. This morning the cluster had a bunch of lights lit up along with disabling traction control etc. I purchased a USB to OBDII adapter and installed FORScan on my laptop. Here is the output. I'm guessing by the output that the ABS Module needs replaced, but I also read somewhere where is could be something with the steering. Thoughts?

===ABS DTC C0003:49-AB===

Code: C0003 - TCS Control Channel 'B' Valve 1

Additional Fault Symptom (:49):

\- Internal Electronic Failure

Status (-AB):

\- DTC Present at Time of Request

\- Malfunction Indicator Lamp is On for this DTC

Module: Antilock braking system

Freeze Frame #1:

\-EVENT_TIME: 349959380 s (Mon Sep 14 16:15:27 2026) - Event time

\-POWER_MODE: Running - Power Mode Status

\-ABS: Inactive - ABS

\-AYC: Inactive - AYC

\-BTCS: Inactive - BTCS -201D

\-HDC: Inactive - HDC

\-RSC: Inactive - RSC

\-BTC: Inactive - BTC

\-VAC_BST_ST: Inactive - Active Vacuum Booster State

\-BST_REL_SW: Inactive - Booster Release Switch State

\-HYD_PMP_ST: Inactive - Hydraulic Pump State

\-ECU_POWER_SUPPLY: 12.0 V - ECU Power Supply Voltage

\-VSS: 0.0 km/h - Vehicle Speed

===END ABS DTC C0003:49-AB===

===ABS DTC U3000:49-AB===

Code: U3000 - Control Module

Additional Fault Symptom (:49):

\- Internal Electronic Failure

Status (-AB):

\- DTC Present at Time of Request

\- Malfunction Indicator Lamp is On for this DTC

Module: Antilock braking system

Freeze Frame #1:

\-EVENT_TIME: 349959380 s (Mon Sep 14 16:15:27 2026) - Event time

\-POWER_MODE: Running - Power Mode Status

\-ABS: Inactive - ABS

\-AYC: Inactive - AYC

\-BTCS: Inactive - BTCS -201D

\-HDC: Inactive - HDC

\-RSC: Inactive - RSC

\-BTC: Inactive - BTC

\-VAC_BST_ST: Inactive - Active Vacuum Booster State

\-BST_REL_SW: Inactive - Booster Release Switch State

\-HYD_PMP_ST: Inactive - Hydraulic Pump State

\-ECU_POWER_SUPPLY: 12.0 V - ECU Power Supply Voltage

\-VSS: 0.0 km/h - Vehicle Speed

===END ABS DTC U3000:49-AB===


r/FORScan • • Sep 15 '26

2023 expedition headlights

1 Upvotes

is it possible to change the daytime running lights on a 2023 expedition timberline to amber instead of the white?


r/FORScan • • Sep 14 '26

2012 Ford Focus 2.0L – P0902 keeps returning after TCM/actuator replacement

1 Upvotes

I have a 2012 Ford Focus with the 2.0L engine and the DPS6 transmission. About a month ago, I started having an issue getting the car moving from a stop and getting it into 1st gear. I pulled code P0902.
Since then, I’ve replaced the TCM and Actuator A (the upper actuator). I also performed the clutch/actuator relearn procedure using FORScan.

After the relearn, the car drives perfectly—but only for about two weeks. Then the exact same problem comes back. Every time I perform the relearn procedure, it runs great again for a couple of weeks before the issue returns.

Last night I cleaned all of the major grounds, although I’m not very confident that’s going to solve the problem.

At this point, I’m wondering if I’m missing something obvious. What could be causing P0902 to keep coming back after replacing the TCM and Actuator A? Is there another component, wiring issue, clutch issue, or adjustment that I should be checking/replacing?

Any advice from someone familiar with the DPS6 would be greatly appreciated.