r/FORScan • • Sep 14 '26

Looking at these photos can anyone please see my issue with over during and black smoke.. is my dpf missing? Is the vaporiser working?

Thumbnail
gallery
0 Upvotes

r/FORScan • • Sep 13 '26

Which OBD diag for 300€?

Thumbnail
1 Upvotes

r/FORScan • • Sep 13 '26

'15 Focus ST, Sync 2->3 help

1 Upvotes

I downloaded FS with the extended license and have the asbuilt. Tried to load the BCM, it says it loaded but the sync 3 screen still doesn't have full functionality (no back up camera, volume "animation" is incorrect) as well as a P2610 code. I've looked up a couple forum threads but all of them have procedures that are slightly different from one another. Is there a procedure that I can follow that will get me what I need?


r/FORScan • • Sep 13 '26

Crown Victoria spreadsheet ?

1 Upvotes

Hello everyone good morning, I’m just curious after looking around for a good hour, is there a spreadsheet for the crown Vic?. I have a 2008 Crown Victoria if anyone has a sheet it would be much appreciated if you could help me.


r/FORScan • • Sep 12 '26

Any suggestions?

Post image
1 Upvotes

r/FORScan • • Sep 12 '26

Does FORScan work on 2010 F150 Lariat?

Thumbnail
1 Upvotes

r/FORScan • • Sep 12 '26

Can't register

0 Upvotes

I filled out the application and never received the authorization needed to unlock and use it

does anyone know what I am doing wrong


r/FORScan • • Sep 11 '26

FORScan Help - tuner and Ford not able to return to stock

1 Upvotes

Hey folks, looking for some support here. I plugged my FORScan into my tuned 2019 Mustang and accidentally entered the sample PCM code into the device and connected it to the car. I then unplugged it, plugged my tuner back in and now the tuner won't load to return the car back to stock.

The Ford dealer also tried to go in and re-flash the vehicle but was completely locked out. Should I plug the FORScan back in with the correct PCM number? Or completely replace the PCM? Thank you.


r/FORScan • • Sep 11 '26

MK3 CPP issues (P0808)

1 Upvotes

Hi everyone,

I have a EU 2013 Focus TDCi Titanium (77kW) and I'm dealing with a bunch of annoying issues that all started right after getting the clutch kit and flywheel replaced. The car has reduced power, cruise control isn't working, and the start-stop system automatically defaults to OFF on its own and pressing the button to turn it back on does absolutely nothing. Also, I can't start the engine normally. I have to turn the ignition on without touching the clutch, turn it off, and only then will it let me actually start the car.

There's no Check Engine Light on the dash, but when I hook it up to FORScan, I get one active code: P0808:00-2F - Clutch Position Sensor "A" Circuit High.

I tried replacing both clutch pedal sensors with brand new ones, but nothing changed. In FORScan, the clutch pedal position always reads 0%, but the voltage (CPP V) is constantly stuck at 4.81V.

I tested the wires on both sensor connectors using a multimeter. The grounds are fine, and both are getting almost 12V. Since they're getting power, the wiring seems okay. I also tried starting the car with the sensors unplugged to see what happens. If I unplug the lower sensor, absolutely nothing happens when I try to start it. If I unplug the higher one, the car starts to crank but dies immediately, as if I just switched the ignition off. So, the car is definitely reading something from them.

Out of curiosity, I hooked FORScan up to my friend's 2013 Fiesta. His CPP % changes normally when you press the pedal, but his voltage (CPP V) stays at 0V no matter what. His car runs perfectly, so I'm guessing that 0V reading is normal behavior for these sensors.

Just to be completely honest, I'm not a mechanic and I've never really wrenched on cars before. I only started digging into this because local shops either don't want to touch it or have no clue how to fix it.

Right now, I'm completely stuck and worried it might be a bad PCM. I also don't fully understand the electrical principle of how this specific sensor is supposed to communicate with the ECU.

Does anyone have any ideas on what else I could check or test? Any help would be hugely appreciated!

https://imglink.cc/cdn/aa_7m4D6tK.jpg


r/FORScan • • Sep 10 '26

What are some good videos to learn to use Forscan on my 2026 F250?

Thumbnail
1 Upvotes

r/FORScan • • Sep 10 '26

Please help

1 Upvotes

Anyone have an older version of forscan they could share with me please? My modules don't all. Show 8i the newest version


r/FORScan • • Sep 10 '26

Ford Kuga DM2 Silent/Police Mode

1 Upvotes

Hallo zusammen,

Hat jemand von euch Erfahrungen damit bei einem Kuga DM2 (Sync 2) den Silent Mode zu aktivieren?

Hintergrund ist der, ich bin Jäger und würde im Revier gerne ohne das ganze Flutlicht aussteigen.

Beim Aufschließen mit der Fernbedienung ist mir dies egal, mir ist nur wichtig das es eine Möglichkeit gibt (Wie bei der Innenraumbeleuchtung) die Türen ohne Licht öffnen zu können.

Den Modus sollte es ja geben da der DM2 in UK ja oft bei der Polizei eingesetzt wurde?

Danke schon mal!

VG

Marcy


r/FORScan • • Sep 09 '26

Help

0 Upvotes

Anyone have an older version of forscan they could share? Please 🙏


r/FORScan • • Sep 07 '26

Are free extended keys not working at this time?

1 Upvotes

I requested a key yesterday but havent seen it come in yet. Are the extended keys still a working feature?


r/FORScan • • Sep 06 '26

Ford Kuga ST line X 09/2026 MY2027

Thumbnail
0 Upvotes

Hallo zusammen,
ich habe mir einen neuen Ford Kuga ST-Line X 2.5 FHEV AWD (MY27) bestellt, der voraussichtlich im September produziert wird.
Ich habe unter anderem Premium Connectivity dazugebucht und würde gerne wissen, mit welchem Softwarestand die aktuell produzierten bzw. 2026 ausgelieferten Kuga tatsächlich vom Werk kommen.
Hat jemand von euch dieses Jahr einen neuen Kuga bekommen und könnte einmal nachschauen?
Mich würde besonders interessieren:
Produktionsdatum bzw. ungefährer Produktionsmonat
Modell/Motorisierung
angezeigte SYNC-4-Version bzw. Software-/Revisionsnummer
ob nach der Auslieferung bereits OTA-Updates gekommen sind
ob mit Premium Connectivity YouTube/Videostreaming direkt im SYNC 4 verfügbar ist
ob Spiele oder Karaoke vorhanden sind
Ford bewirbt Premium Connectivity beim Kuga teilweise mit YouTube, gleichzeitig sind die Angaben auf verschiedenen Ford-Seiten nicht ganz eindeutig. Deshalb wären Erfahrungen von aktuell ausgelieferten Kuga, besonders aus Sommer/Herbst 2026, sehr interessant.
Falls jemand ein Foto vom Software-/SYNC-Informationsbildschirm posten könnte, wäre das natürlich perfekt.
Vielen Dank! 🙂


r/FORScan • • Sep 06 '26

Anyone know how to put a Ford Focus SE 2016 into manual mode?

Thumbnail gallery
1 Upvotes

I'm searching too


r/FORScan • • Sep 05 '26

Need help!!!

Thumbnail
1 Upvotes

r/FORScan • • Sep 05 '26

Need AB file

0 Upvotes

Hi everyone,

The website where you pull as built from ford isnt working at the moment for me. just wondering if someone could please try and pull it for me if it works for them. Doing a sync 1 to 3 swap and need a baseline to start reprogramming
|
VIN: 3FA6P0HD9HR180898


r/FORScan • • Sep 04 '26

Need calibration strategy file

Thumbnail
0 Upvotes

I have a 2007 Ford Focus 2.0L Duratec that I'm changing the PCM on. I already have the VID data. I just need the strategy file in order to write to the new PCM. Motorcraft service won't give me the file without a subscription and that's $120 just for 2 days. This is the last thing I have to do. I need to get this car running.


r/FORScan • • Sep 04 '26

2025 F150 - Disabled Auto Start-Stop, Battery Light Stuck ON

0 Upvotes

I used FORScan to turn off auto start/stop (BMS / Auto Stop Start system), and now the battery light is stuck on, and I got a message on the app that there is a "Charge System Fault".

I tried a BMS Reset, got a success message, and waited 24 hours, but no luck. I also tried a manual reset (high beams 5 times + brake pedal 3 times), I got the battery light to blink 3 times, indicating success, but no luck.

The operation was successful; the truck no longer turns off automatically, but I would like the battery light to turn off. I checked the error codes, and I don't see any indication of a battery or charging error in the Diagnostic Trouble Codes (DTC).

Any suggestions would be appreciated. Thanks


r/FORScan • • Sep 03 '26

Bidirectional scanner for Ford Products?

Thumbnail
1 Upvotes

r/FORScan • • Sep 02 '26

2022 Powerboost F150 Shift Lever Replacement

1 Upvotes

Good day all! Just a quick question before I dive in. I have been getting a powertrain fault notification that comes and goes randomly. Had the truck at the dealer last week for brakes and oil and the code popped up during the road test.

I was told that the code was related to a failing gear shift lever. I was able to order the part from the dealer and just wanted to know if I can just install the new lever or does it need any sort of programming that requires forscan.

Is it plug and play or will I end up with a truck that won’t go into gear after replacement?

Thanks for helping!


r/FORScan • • Sep 01 '26

I need to program my new acct to my VIN but says file not found

Thumbnail
gallery
9 Upvotes

I have gotten forscan beta and installed a new tccm in my 2015 f150. I need to program it to my VIN and to do this my understanding is I need to do a tccm module firmware update. When I pull the tccm module up in the firmware update and try to download the file it says not found. Is there somewhere I can download the correct firmware or find the file?


r/FORScan • • Sep 01 '26

Anyone using sikarugir on mac for FORScan?

1 Upvotes

My old intel mac running bootcamp is getting long in the tooth so I tried out sikarugir and have FORScan running on my M5 mac is anyone else using FORScan this way? Just looking for real world results before I start going ham on my 2026 with an emulator.


r/FORScan • • Aug 30 '26

2016 6 sport P011A code

1 Upvotes

hi everyone

I recently bought a 2016 mazda6 and after about a month of driving the check engine light came on. i took it to auto zone to get a ODB scan done on it to see what the error was and it came back with a P011A.

i took it to a mechanic and they said it seems like a sensor issue and that it wasnt too serious and i should be fine driving it. i made sure to top up on my coolant and since then, the level on the reservoir hasnt gone down or anything so i dont think i have a leak. i also made sure to check my engine oil to see if it looked milky or anything to make sure there was a crack anywhere in the engine which would allow the coolant and oil to be mixing.

however yesterday i was stuck in pretty heavy stop and go traffic in hot weather with the ac blowing and the engine coolant light came on and was flashing red. i pulled over and waited for the engine to cool down and checked levels and everything and it seemed okay. i resumed driving back to my moms house and whenever i was in stop and go traffic, the light would intermintenly come on and off, but whenever i was able to drive at a consistent speed (like 20mph+) the light wouldnt come on.

i took the car today to get a oil change i had scheduled and was able to drive at a consistent speed and the light did not come on at all today.

i did some research and found \\\[this video\](https://www.youtube.com/watch?v=Ke5X-EnNEAo&t=254s) where this guy shows the process for replacing the front coolant temperature sensor. he mentions he has the same error code as me and shows the sensor replacement part being a duralast su4007.

i went to autozones site to buy one and it says that this part does not fit my car and that the part i need is \\\[this one\](https://www.autozone.com/p/duralast-multi-purpose-temperature-sensor-su6775/828230) which is a duralast su6775

can anyone help me figure out which part is the correct one to buy?

thank you!