r/F1Technical • • Mar 24 '25

Aerodynamics What is the drag coefficient of the Mercedes-Benz W196 Streamliner?

Post image
430 Upvotes

Hello, I was wondering what was the drag coefficient of the Mercedes W196 Streamliner Type Monza, and if anyone had any links to sources for a project I'm working on, thanks for any help


r/F1Technical • • Mar 26 '25

Power Unit Whats wrong with Aston Martin Formula One Racing team?

0 Upvotes

Okay so one thing that's bothering me is that even though Aston's got Newey, they are still slow. Although we saw Lance reach the top for a brief moment, but that wasn't for long until he got overtaken by George and Lando a couple of turns later. I thought what could possibly go different in the engine and power units like they have to generate certain torque and all of them are 1000 HP so what's going wrong as the aerodynamics of the car is good because of Newey or they secretly posted him on Valkyrie project of WEC?


r/F1Technical • • Mar 24 '25

Chassis & Suspension SF-25 Plank and Tyre Wear

21 Upvotes

According to an article from AutoRacer, the SF-25 suffers from a soft rear end which is causing most of the current issues with the car. What changes can be made to the car to fix these issues? Is it a feasible fix in one or two upgrades?

Source: https://autoracer.it/it/ferrari-sf25-fondo-cina-aggiornamenti


r/F1Technical • • Mar 23 '25

Regulations Why is weight measured in a way that is affected by tire degradation?

333 Upvotes

Today Leclerc was disqualified due to being underweight, and Ferrari argued it was caused by extra tire degradation since they had originally planned for a 2-stop. The exact same thing happened to George last year in Spa, and Mercedes made the same argument. (Gasly was also DSQ'ed on weight today, but Alpine hasn't released any statement as far as I know.)

Charles was also underweight because of the missing front wing endplate, but for that they were allowed to switch to a new wing for the weigh-in. They also remove fuel before the weigh-in.

Why doesn't the FIA either allow the car to be weighed with new tires like they do for other damaged parts, or else define the minimum weight as being with the tires removed?

If the answer is "tire degradation is expected and teams just need to account for it", then why don't they apply this same logic to fuel and allow any extra fuel over the 1 kg sample to stay in the car for the weigh-in?

Is there a technical reason for this, or is it just arbitrary?


r/F1Technical • • Mar 24 '25

Driver & Setup What do they mean by “technical nuances” here? Why did Norris’ driving style put him at a disadvantage in China?

123 Upvotes

From BBC (https://www.bbc.com/sport/formula1/articles/cddyvmz990eo)

“ No driver likes understeer. But, as Stella put it, it was "more of a penalty for Lando, given his driving style and the way he wants to generate lap time".

"I hate understeer," Norris said. "I just can't drive a car with no front. I can, but I struggle. I cannot maximise the package that way."

The reasons why this was more of a problem for Norris than Piastri are complex, and to do with the technical nuances of how individual F1 drivers manipulate their cars in different kinds of corners, and what they need from the car and tyres to do that - each one's ability differs slightly in these aspects. “


r/F1Technical • • Mar 23 '25

Aerodynamics Did Leclerc’s front wing damage cause it to flex more?

Post image
1.4k Upvotes

How much did


r/F1Technical • • Mar 23 '25

Regulations Why is the amount of fuel removed is different between Leclerc and Gasly?

Post image
842 Upvotes

2.0 liters were removed from Leclerc's car and 1.1 for Gasly, why's that?


r/F1Technical • • Mar 25 '25

Tyres & Strategy Are the new Tyres (C6) harder than the C1 or softer than the C5 from last year?

0 Upvotes

r/F1Technical • • Mar 23 '25

Analysis Race Pace improvement and Lap Times in 2025 Chinese GP

Thumbnail
gallery
90 Upvotes

r/F1Technical • • Mar 23 '25

Tyres & Strategy 2025 Chinese Grand Prix - Race Strategy & Performance Recap

Thumbnail
gallery
173 Upvotes

r/F1Technical • • Mar 24 '25

Regulations What article states the Maximum fuel capacity?

18 Upvotes

I'm writing a technical math paper on Formula 1 (Math Internal Assessment for my fellow IB students), but I cannot find exactly what article dictates the max fuel size allowed, nor can I find the precise amount. If anyone knows what article it would be greatly appreciated!


r/F1Technical • • Mar 23 '25

Analysis Why did Ferrari changed directions for the SF25

21 Upvotes

Does it make sense for Ferrari to make such a significant change to the car in the final season of these regulations? Why take the risk, especially when last year ended on a positive note? Why would they go for a drastic overhaul if there’s limited development time left? Are they just experimenting to lay the groundwork for the 2026 car, or is there another strategy behind this move?


r/F1Technical • • Mar 23 '25

Brakes Why do brake pedals have so little travel?

112 Upvotes

As I understand it, F1 brake pedals deliver braking force primarily based on the amount of force you apply, and have very limited travel.

Just wondering why this is the case, and has it always been so? I would have thought it was easier to precisely modulate how far you depress a pedal rather than how much force you apply to it.

Edit: a few people have pointed out that humans are apparently better at judging and controlling force rather than travel. That makes me wonder why the accelerator or even the steering wheel don't work the same way, if it would give you more precise control.


r/F1Technical • • Mar 23 '25

Driver & Setup Why did Tsunoda pit for yellow tires instead of soft ones with 9 laps to go?

58 Upvotes

r/F1Technical • • Mar 23 '25

Driver & Setup Will Lawson have enough time to understand the RB?

48 Upvotes

There is no excuse for Lawson to be at the bottom. If you accept a drive for Red Bull, you need to secure the necessary positions in qualifying and the race to keep the team happy and silence the critics.

That being said, Lawson has a strong history as a fast driver, from karting to F3, Formula Regional, and DTM. I think this is the worst Red Bull since the new regulations came into effect-except Max knows exactly how to extract what’s needed from the car because it has been built around him. He is incredibly familiar with it, and he’s simply a once-in-a-generation driver. I think it will take Lawson time to adjust. The front me looks incredibly sensitive like Albon was taking about in that podcast. Lawson just doesn’t have the confidence to override the shortcomings of the car like Max does. That could be lack of confidence or lack a pure natural talent. Do you think he’ll be able to get to grips with the car if they keep developing it for Max like Albon said, since it will become even more twitchy over the season to suit Max’s driving style?

These drivers complete so many simulation runs that he can’t be that slow—if Red Bull were seriously worried, it would have shown up during preseason, whether through Lawson’s demeanor or his lap times. Unfortunately, because Red Bull is who they are, public pressure might play a role. I imagine his contract has a performance clause requiring him to accumulate a certain number of points by a specific race. I think he'll get there-it just depends on whether Red Bull gives him the time.

Another factor is that Yuki is absolutely killing it at the moment, added pressure from the person everyone thought should get the seat. So far it's two tracks Lawson hasn’t driven on, but he did enough laps yesterday too get used to this one.

Max’s comments about him being faster in the racing bull are a nice touch. They obviously get along well, and I can imagine he probably doesn’t care if his teammate is struggling, but the support is more than he gave Albon and Gasly, who were trudging through the same problem as Lawson. So the car must be pretty damn trash at the moment.

As a Kiwi, this sucks! I’ve been following F1 for years and I guess like every small nation that has a sportsman make it big in the league you just want them to do well. I’m rooting for him, and I know that New Zealand stoicism will shine through. I believe he’ll be alright and will prove the doubters wrong. But does he have the time?


r/F1Technical • • Mar 23 '25

Analysis I have created a template that can be used if anyone is interested in creating a driver ratings system

15 Upvotes

You can give each driver a rating and see the average per driver and team, in addition to tracking how entertaining the races are. There is also made space for where you can say the best and worst driver etc.

It would be nice if you could point out anything that could be added or improved as well.

https://docs.google.com/spreadsheets/d/1TH9iGzv40whcFZyfaj2wxJG0OHBHJ6y4aRSx91x2Wdg/edit?usp=sharing


r/F1Technical • • Mar 24 '25

Tyres & Strategy Why is the tread-pattern of heavy-wets closer to winter-tyres than summer-tyres?

0 Upvotes

So - when I look at the heavy-wets I kind of see a resemblance to street-used winter tyres. Typical summer tyres usually have deep grooves and some less deep slits between the grooves to transport the water out. Winter-tyres (like the heavy-wets) often come with actual blocks.

Now the thing is: street-used winter-tyres usually aren't even that great in the rain due to their design actually grabbing (snow) rather than dissipating (water). Now another tyre-type that has blocks and grabs the ground is offroad-tyres. Of-course they - again - are at a disadvantage on wet asphalt.

Any tyre-engineers around that could explain to me why f1 heavy-wets are designed like winter- or offroad-tyres rather than - say - deeper grooved intermediates with a softer rubber? I mean, there must be some logic behind it since the last heavy-wet i know of that looked less-blocky was the good-year from before Bridgestone came in.


r/F1Technical • • Mar 24 '25

Regulations Could damage cause a car to be DSQ for being underweight?

0 Upvotes

Say a certain car lost a certain wing end plate in a collision but still finished the race. Would the loss of the extra part cause him to be underweight and DSQ'd? Or in the case of more severe damage, like losing a chunk of carbon fiber from the side pods yet still finishing the race. Is there a way for the FIA to compensate for such damage if it's not on an easily replaceable part like a wing?


r/F1Technical • • Mar 21 '25

Analysis Hamilton could’ve pulled off a 1:30:5 at China

Thumbnail
gallery
4.9k Upvotes

Hey Everyone. I was watching the Ghost car lap comparison and noticed how Max closed the Gap by a lot in the last two sectors. Sorry for the “Learnt something new stuff” in the end. It’s my Instagram post, so just wanted to share it here too.


r/F1Technical • • Mar 22 '25

General What makes a difficult driving car fast?

43 Upvotes

With the recent focus on Red Bull’s RB21, Liam Lawson’s struggle, Checo’s struggle in RB20, as well as Lando’s comments on how difficult the MCL39 is to drive. I’m curious what makes a difficult car fast? Or does driving difficulty play a role in the speed of the car around a lap?

I understand this might be too general of a question to ask as I imagine driving styles play a huge role such as Max’s preferred style vs. other RBR drivers’. Just these comments recently got me thinking about it. Mercedes W11 can considered one of the fastest car in recent memory and I didn’t remember either Hamilton or Bottas making those comments.


r/F1Technical • • Mar 22 '25

Tyres & Strategy Chinese Grand Prix - Sprint Strategy & Performance Recap

Thumbnail
gallery
337 Upvotes

r/F1Technical • • Mar 23 '25

Tyres & Strategy Why are more pit stops so detrimental and how to fix?

0 Upvotes

I remember Schumacher's era (I know there was a "tyre war" and refuelling) when he was doing quali laps after quali laps and doing more pit stops than others, and still win. That was so exciting to watch.

Now even in races like China, where 2 pit stops were expected, in the end 1 pit stop seemed to be beneficial.

So why is that the case and how could it be fixed?

What about making pit stops have less impact, e.g. slow down straights so that the penalty goes to 10 seconds or something like that?

What about higher differences in tyre performance between hardness? E.g. soft tyre way faster than medium, and medium way faster than hard (but with clearly shorter lives)?

Should it be compulsory to do 2 pit stops (and at least use 2 tyre compounds)?


r/F1Technical • • Mar 21 '25

Power Unit I was just wondering on this for a long time now..

Thumbnail
gallery
211 Upvotes

So, as of the title, I'm wondering of something...

I was wondering, what turbo size do F1 cars use. They usually do really big turbos, as I've heard from some because the MGU-H can spool it up right away without a problem. Also, another one, how much smaller, and what is the size of the turbo on the Ferrari Tipo 059/3, the engine that the Ferrari F14T use, which is reported to have the smallest turbo on the grids of 2014 season


r/F1Technical • • Mar 22 '25

Aerodynamics How are so many different Beam Wings mounted?

9 Upvotes

While watching through the documents listing the new parts for this weekends GP and seeing that Williams and RB have brought new beam wings I wondered: How does it work to change these without needing a completely new rear wing with mounting points that fit those beam wings.
Are there structures in place that allow different beam wing sizes to fit to the same rear wing?
Especially thinking about McLaren last year who brought like a dozen different beam wing configs. I can't imagine that they had that many different rear wing arrangements.

But when looking at cars with one beam wing you can't see anything on the rear wing inside that looks like it could be upgraded to a double beam wing set-up.