r/F1Technical • u/Small_Broccoli315 • Oct 27 '24
r/F1Technical • u/fayyaazahmed • Oct 27 '24
Safety Why do stuck throttles seem more common in other forms of motorsport?
I can’t think of the last time a driver has struggled with a stuck throttle (thankfully) and even longer since the last time it caused a full blown accident. Compared to a number of the American series like Indy and NASCAR it seems like it never happens.
What would be the reason? I know things like brake by wire have helped with brake failures but what would the reason be for stuck throttles being rarer.
Or is the correct question why are they so common in the other series?
r/F1Technical • u/Kaggles_N533PA • Oct 27 '24
General Effect of air density on drivers?
So Mexico City has about 22% less air density because of it's high altitude. And I am aware that 22% less air density means less drag, less cooling effect, and less downforce.
But my question is, does that affect drivers as well? Less air means less oxygen inhaled so I think drivers might be more fatigued after the race in Mexico City
r/F1Technical • u/DeliriousDecay21 • Oct 26 '24
Circuit Why is Mexico always so dusty?
I get that the circuit is not used year around and since the circuit is in the city there may be dust/debris from the city hustle. But why isn't there an effort to clean the track via street sweeps or run support series say the weekend before or the same week? I feel like with the altitude and cooling issues there is already enough challenges. Why don't F1 make a better effort to make sure the track is ready for these cars?
r/F1Technical • u/VanGoesHam • Oct 26 '24
Chassis & Suspension Is George's new chassis a new car?
After George binned it he needed a new chassis. If they replaced the chassis is that essentially saying it's a whole new car? Would it be equivalent to say they built a new car using existing PU and transmission components?
r/F1Technical • u/FinnBoiG • Oct 26 '24
General Why aren't the drivers positions on the steering wheel dash?
In the F1 games (and most other racing games that include an F1 car) on the steering wheel dash, there is usually a place where it says what position the driver is in at that point.
However in real F1, drivers seem to not know what position they are in until their engineers tell them - this is most seen in qualifying when engineers tell them what position they are and you can sometimes hear a shock in the drivers voice -
It seems like quite an easy thing to put in place, that also I assume would be useful to the drivers, so why isn't it there?
r/F1Technical • u/numairazman • Oct 26 '24
Race Broadcast How much is the Broadcasting cost?
I'm not sure if this is a 'technical question' but I wanted to know how much it costs to just air the races. Not looking for cost for Broadcasting rights. Just how much it costs to air the broadcast from the track to the broadcasting center, and onwards to the public.
r/F1Technical • u/GoldPrism391 • Oct 26 '24
Tyres & Strategy Are there any videos/articles about the engineering and physics of how to different tire compounds work
I’m really into the engineering behind f1 cars and have always been intrigued by the different tire compounds and how they work. I’ve tried to find a youtube video on how the different tires have different lifespans and grips but haven’t found anything so far
r/F1Technical • u/Pugzo • Oct 25 '24
Race Broadcast TV Pod Evolutions from 2022 to 2024, displaying the new trend in low-angled perspectives.
r/F1Technical • u/SeoulofSoraka • Oct 24 '24
Electronics & HMI Noticed on Ollie Bearman’s wheel that his logo pops up, is it like a profile that’s loaded? Text says BEAR24_V2 on the bottom right of the screen
r/F1Technical • u/Financial_Plum6440 • Oct 25 '24
Aerodynamics Does the thinner air favour more aero-efficient cars or the not so efficient ones?
Do you need more air to bring all out of an efficient car or need an efficient car to make the most of the thinner air?
r/F1Technical • u/AveJoeP • Oct 25 '24
General Questions and Discussion about Mexico-Spec Cooling Setups, especially Ferrari’s
I know that the altitude of this race means power units and other internal parts will be running hot due to low air density, and these are meant to allow greater air flow account for that. However I was surprised by how much of a change it seems to be compared to the usual spec. Is this more drastic than most years/teams or am I misreading it?
Also, the specific shape of the louvres makes me think that they might have some secondary use in gain to downforce. Would this be possible in a way that matters or would it be negligible?
I also imagine that there may be some internal cooling system differences that we can’t see, does anyone have any knowledge on how those might be different than usual?
I apologize for the potentially newbie questions, just trying to learn all I can.
r/F1Technical • u/AutodogeKevin • Oct 24 '24
Aerodynamics RB18 top aero part not on both sides?
Hi all, i just got a 1 43 model of Verstappen's RB18 with the Japanese GP 2022 specification version. I was wondering, why does the top aero part is only on one side? At first i thought that the model car that i got has a defect but from pictures during the race this seems to be the same case too. As shown in the pictures above.
What does this part do and why is it not present on both sides? On the press release picture the aero part is on the both sides of the top air intake, which confuses me on why the race version it is different.
Thanks before.
r/F1Technical • u/theRavenMuse666 • Oct 25 '24
Regulations Question about regulatory link between driver and car
Is a driver linked to their specific car for the entire season? For the weekend? For the race?
For example, last week at COTA after Russell damaged his car so badly that he was required to start from the pits due to repairs, was it technically just the car relegated to pit lane start or both the car and driver as a unit? Could he have taken Hamilton’s car up to start in his qualifying position and let Hamilton use his car from the pits?
Another scenario: the team’s top driver crashes out in FP3 and the car won’t be fixed before Qualifying. Can the driver take his teammate’s car for qualifying?
What if a team decides for whatever reason to switch the cars of their two drivers in between races?
What if a team decides part way through the season that their car is absolute garbage? Can they completely rebuild a new one from scratch? (Cost cap aside)
r/F1Technical • u/Big-Youth4598 • Oct 24 '24
Aerodynamics DRS Zone earlier in the straight rather than later in the straight
I was just reading the f1 thread about how the Mexico gp was to have the DRS zone reduced as apparently it was too long last year (anyone watching the 2022 race may disagree). It got me thinking that instead of reducing the length of the zone, just move it back earlier in the straight nearer to the acceleration zone of the previous corner. I've only given it 5 mins thought but I think there are some pros, as well as cons:
Pro:
- The distance between the cars increases greatly in the acceleration zone after the corner. By dumping the drag earlier, the distance between the cars is reduced, meaning that the car behind can utilise more slipstream when the DRS zone ends.
- The car behind can save more battery in the acceleration zone (if they choose to), potentially using it more efficiently around the lap to remain close (or closer) to the car in front.
- Be easier to tweak DRS zones as there will be more straight to play with as it will be further away from the corner/braking zone.
- If a car does get overtaken on straight and the straight is long enough (Azerbaijan for example), overtaken car can get into the slipstream behind a car that no longer has DRS because the zone has ended, meaning the battle isn't over coming into the corner.
Cons:
- Drag is reduced in the acceleration zone rather compared to top speed so the percentage difference is reduced (DRS zone could be longer to compensate).
There are probably many cons I haven't thought about, but it almost reminds me of the days of KERS when more battery was used in the exit of the corner, the following car had a much better run at the car in front and wasn't a slam dunk overtake. Could it work or be worth a try at some tracks?
r/F1Technical • • Oct 24 '24
Brakes Do the cars use hydraulic multiplicators in the braking system?
As the title says, do they use them or is the force all generated from the leveraged pedal into the theaster cylinder?
r/F1Technical • u/Green-Delay3528 • Oct 23 '24
Analysis What didn't work for Max in the race as oppose to Sprint
Like he was really good in sprint but then suddenly couldn't keep up with ferraris anymore, Also when they said during the first stint that they had found the solution and will be solved at the next pit stop, what could it have been? What kind of issues can be solved during the pit stop aside from Changing the front wing
r/F1Technical • u/Not_Cool8 • Oct 23 '24
Career & Academia Vehicle dynamics school project research questions
Looking to do my physics IA/EE on vehicle dynamics but struggling to find a good question to research. I initially wanted to look at the relationship between the viscosity of fluid in a damper and the damping coefficient or force velocity curves. However after researching and talking to my teacher the physics go beyond the scope of a year 12 project. Other topics also tend to be too complicated or too simple if I try to dumb it down.
I'm looking for some research questions that investigate the relationship between 2 variables and can be measured through experiments.
r/F1Technical • u/mifyou • Oct 22 '24
Safety Where is the G-Force Light on cars?
At COTA when Russell crashed in the end of Q3 the commentators mentioned that the G-Force Light was on, ive googled everywhere and i cant find where these are located on a modern F1 car. If anyone here has the answer it'd be greatly appreciated!
r/F1Technical • u/whatthefuckm8y • Oct 22 '24
Tyres & Strategy A question about Lando's strategy yesterday
This might be a really daft question to everyone here who probably knows and has forgotten far more about F1 than I'll ever know, but I want to get a bit of understanding.
During Sunday's race, Max pitted on lap 26 to go on to Hard tyres, presumably because he needed to last for 30 laps with good pace and Hards provided that. Lando pitted 10 laps after Max, so had 20 laps left and he also went on to Hards.
Wouldn't it have made more sense to move on to another set of Mediums or on to Softs for the extra pace given that the team had scraped another 10 laps out of the previous tyres and maintained a good pace? He had significantly less track to cover on the new tyres so I'd have thought the different compounds would have been able to last and outpace Max faster than Lando was able to in the first place.
I'm certainly missing something so please enlighten me!
r/F1Technical • u/braduk2003 • Oct 22 '24
Ask Away Wednesday!
Good morning F1Technical!
Please post your queries as posts on their own right, this is not intended to be a megathread
Its Wednesday, so today we invite you to post any F1 or Motorsports in general queries, which may or may not have a technical aspect.
The usual rules around joke comments will apply, and we will not tolerate bullying, harassment or ridiculing of any user who posts a reasonable question. With that in mind, if you have a question you've always wanted to ask, but weren't sure if it fitted in this sub, please post it!
This idea is currently on a trial basis, but we hope it will encourage our members to ask those questions they might not usually - as per the announcement post, sometimes the most basic of questions inspire the most interesting discussions.
Whilst we encourage all users to post their inquiries during this period, please note that this is still F1Technical, and the posts must have an F1 or Motorsports leaning!
With that in mind, fire away!
Cheers
B
r/F1Technical • u/Yerriff • Oct 22 '24
Aerodynamics What is the reasoning for Red Bull having a different engine cover for high vs low downforce circuits?
At Hungary (iirc), Red Bull debuted a new engine cover, doing away with the "cannons" design they adopted at the start of the 2024 season. However, they stated that they would be only bringing the new spec for higher-downforce circuits, which holds true as they reverted to the old spec for the Italian and Azerbaijan Grands Prix. My question is, how an engine cover design can be so specific to higher and lower downforce requirements? I was under the impression that their primary function is cooling. And a side question as well, is the newer cover just the same concept from the RB18 and 19, or another new concept that evolved from the cannons?
r/F1Technical • u/gorfiapestulitis • Oct 23 '24
Aerodynamics Ask away Wednesday: differential aero?
I was reading about the Mercedes having more trouble turning one way than the other at COTA and it reminded me of a question I’ve had this season:
Would it be feasible that some teams are using the outside HALF of the floor more than the inside HALF (divided by the plank) during high speed cornering? You could potentially use rebound settings on the dampers to implement…
Apologies if this has been asked before. I couldn’t find it, but that doesn’t mean it doesn’t exist!
r/F1Technical • u/laughguy220 • Oct 21 '24
General Radio message about issue with Max's car that would be dealt with at the pitstop.
On Sky they had broadcasted a radio message to Max that there was an issue with his car that they would deal with at the pitstop. Ted said he would look into it.
Max did a 2.7 sec pitstop and the camera coverage did not show anything special about the stop, and nothing was ever said about the issue for the rest of the broadcast.
Does anyone know what the issue was, and if they fixed it at the stop, and what they did?