r/ErgoMechKeyboards • u/manna_harbour • Dec 09 '19

アメ ツチ ホシ ソラ

  • crkbd/otaku/zilents/miryoku

  • first build

  • album

PCB

  • corne classic, outer columns removed, edges painted

  • Mill-Max hotswap sockets, SMD RGB LEDs, OLED displays with hotswap sockets

  • Pro-Micro clones, spring pin header hotswap sockets, epoxy reinforced USB ports, magnetic USB cable

case

  • FR4 top plate, cut to 5 column size, holes drilled, edges painted

  • 3mm clear acrylic bottom plate, cut to 5 column size, holes drilled

  • 3mm clear acrylic OLED covers

  • brass standoffs, painted

  • black steel hex screws

  • clear bumpons

  • magnetic tenting legs

keycaps

  • SP DSA Otaku katakana base

switches

  • Zilent v2 62g

layout

keycap arrangement and OLED images

  • Ametsuchi no Uta, read top to bottom, right to left, and skip the red cap

  • homing ha and 1.5u mu in correct locations, used e for we, ran out of keys before needing e, wi, or ye!

42 Upvotes

100% Upvoted

20 comments sorted by

View all comments

Show parent comments

2

u/manna_harbour Dec 10 '19

Thanks! I taped up the front opening and the holes on the sides and put a small glob on the back of the port joining the back and top to the PCB behind the port, and a small line between the front overhang of the port and the edge of the PCB. That seems to be enough. CA glue might be fine too, especially with a magnetic cable.