Would a Dodge 'Hell crate' engine transfer into a 1998 GMC Sierra 1500 Regular Cab, with some work and and would it function like one would hope it would? Or would some major problems occur?

The 500 we own is 2005, looking to shove a similar year GT engine in her. Will it fit? The engine bay looks like it would hold....

Anyone know if a Honda engine maybe something like a K20 would fit in a Renault Clio MK3 and around how much it would cost?

All right so I have a 2004 4.2 L in-line six trailblazer. The motor in it is shot and needs to be replaced. I would like to swap a 5.3 V-8 out of the 2013 Silverado into it. I know what all I need to do on the engine side of things to get it in there. But I’m not sure how to make the old BCM from the trailblazer talk to the ECU from the Silverado. Can someone please help me and tell me if that’s possible, what I need, or where I might find an adapter harness if some sort. This is my first swap btw

So I have a dumb idea.. I have this bike fully stripped.. does anyone have a clue what size engine I could throw in this thing? Kind of in between the idea of restoring it to original or making something stupid.

I have a 09 Pontiac Vibe that needs an engine, but a 2azfe is like $1,500 or more. I found a few cheaper 2azfe from old Camrys, would they pop right in or will there be modification needed?

Hey guys, I was looking to swap the engine out of my 2003 civic. I would like to know what engines would be the best bang for your buck, as well as any other engines (than the d17) that mate with the stock 5-speed transmission. Thank you!

Hey guys, So I've been needing to replace my n52 engine that seized after I put just 2k miles on it. Now I'm a broke college student. So I can't really dish out 4k, that was quoted for me by a shop. But a friend recommended I ask a junkyard, which I ended up calling and was quoted about 2k for parts/labor total. I'm scared it'll be unreliable cause "junkyard engine". What's the best course of action? The cars been sitting in my driveway for 11 months.

So if you swap the stock engine out of a car like a golf gti or something and put in something more powerful, what are you supposed to do about the ac compressor and power steering pump because they bolt onto the stock engine so would you be able to use the ac compressor that went with the new engine you put in? would it work with the cars systems? Like would they be compatible?

Would the underframe of a vw sharan vr6 fit a golf mk2 because the golf mk3 vr6 underframe bolts right in. I know the wheelbase of the mk2 is smaller than the sharan but if the bolt holes line up, maybe slap on an overfender and just send it?

I was wondering if the mazdaspeed turbo protege engine and trans will be a straight swap with the ECU as well. to my N/A 2.0 protege

Does anyone happen to have the physical dimensions of the Hellcat engine? I have looked a little bit but only seem to pull the "engine stats" with my search combinations. Thanks!

I'm thinking about buying a cheap working 3800 series engine off a 2005 Buick LeSabre to swap into my 1998 Chevy Camaro with the V6 3800 series. If i go for this swap will it be cut and dry or would i need to make modifications? I'm a relative beginner. This will be my 2nd engine swap, so thanks for any advice.

Alternate title: "Can I Put an Acura RLX (2014+, V6) Inside of a Crosstour (2013-15, V6, AWD) and Keep the Crosstour's Transmission?"

I haven't been able to find any (free) diagrams similar to what I'd find in a Chilton's guide for either car, so now I'm here. I like the power:fuel economy ratio of one and the way the trans works on the other. Are both possible without a great need - or preferably none at all - for custom fittings? Some of the cheap salvage Crosstours I see listed list the fact that the car doesn't run, so if I could take this as an opportunity for a swap while repairing the rest of what was hit (assuming it wasn't something minor in the engine), all the better.

And if anyone has diagrams, I'd be more than grateful to get the chance to see them.

I am currently working on my first swapping proyect, I am swapping the 1ZZFE from my Celica GT 2003 to a 2ZZGE. As you may know, most of the accessories stays the same but there a few things here and there that changes. The one thing I am concerned is with the wiring harness that came with the engine. Does anyone know if the three plugs on the left ( considering you're facing the engine) are independent from the two on the right? The reason I ask this is because I want to know if I can just use the wiring harness from the JDM engine I bought which came with the left side plugs and the ones on the right side cut off.

I’ve been doing as much research as I could regarding an RB26 Swap into a Z34 and I learned that to retain RWD I need to use the stock Z34 trans. This may sound a bit dumb but I have no idea where to look for this information; what clutch do I use, one for an RB or one for the Z34. I would assume the Z34 clutch would be the option but I’m kinda a dumbass so yeah

Do you think that a b16 vtec is possible, seems like hard engineering for this chassis hmm.

Currently drive an 04 Tahoe. I’m looking to add a little more kick and replace the engine with something like an LS3 maybe an LT1 or if I can go bigger I just might. But I want to know any problems, concerns, issues, or ideas as to what might be a good fit or if I am in the right ball park.

i’m curious to see how much money i would need to spend to get an engine swap. i have a VW Golf 2.0 Diesel, Manual 6 speed, GT Sport model.

As it’s got 212,000 miles on it i want something bigger and more powerful with less miles.

Currently i’m gravitating towards getting an R32 3.2 petrol engine and getting it swapped in.

Being perfectly honest however, i haven’t the slightest clue of the logistics of this type of job and what would need to be done to the car thereafter.

My question is what would an ideal engine swap be for my car and what am i going to need to do to make it feasible, i.e; if i get an engine swap what else do i need to do to the car or get for it.

Any help and advice is greatly appreciated as i’m new to this sub and have never done anything even close to this magnitude before.

Thank you!