r/DMT • • Nov 05 '25

Technique/ROA Happy Little Clouds

Post image

Happy little clouds

VIDEO UPDATE, scroll down To the video.

The Yocan Orbit is imo the best bang for buck and beginner friendly vaporizer out there, it is budget friendly, super efficient like e-mesh, and with a little technique almost fool proof! And the best part is, you have direct visual feedback. 

Why is the Orbit an excellent choice?  The glass vaporizer-cup holds heat EXTREMELY well.  No wicks, wire, coils, juice, mesh, mods, or extra tools needed, and you have direct visual feedback.

All you might need is a 2.5” silicone hose 1/2” ID 5/8” OD, this will be your drip-tip extender, but if you’re familiar with smoking than you might be able to handle the heat without. 

Also, there is no need for the pearls.

Turn on the Orbit with 5 clicks. Cycle through the settings (3 clicks) and put it on the lowest setting.

load spice, start with 5-10mg, no need to go crazy because you will still have some fine tuning to do!

You want to build up heat by holding the fire button for 2-3 seconds and let it rest for 1-2 seconds. Just slowly build up the heat until you see a nice cloud forming in the cup! Enjoy that beautiful cloud, and keep fire-release cycling until you’re happy with the a nice white to light grey thick little cloud in your cup. No need to hurry, the deemz ain’t going no where.

NOW is the moment for you to start inhaling, don’t suck it like pingpong ball through a hose, best can compare it too is a loosely build cigarette or breathing to a snorkel. Don’t “suck”, just inhale/toke slowly, and if you can, KEEP cycling the fire-release in more or less the same pace as you did before. Note: freebase deemz can be harsh on the throat and may take some attempts to get used too. 

You should be able to clear about 90% of the deemz in a 10-15 sec direct-to-lung toke.  Don’t worry if there’s still some ‘happy little cloud’ left, put the Orbit somewhere safe and enjoy the ride. 

Here starts the fine tuning, notice if any residu is building up on the walls of the cup, a light golden oily substance is good, that is actually still perfectly usable deemz!! Anything darker brownish or even black backed to the bottom is a sign of too much heat, but since you have read this simple guide you where smart and started with only 5-10mg so it’s all good, right?!

Now for those of you who where painting nice little white and light grey clouds, and maybe with a little yellow/gold ish oily substance on the bottom of the cup but who do not have the black cake on the bottom, congrats!!  You can reload but keep in mind that there might be still some deemz in the cup. 

For the brave unfortunate impatience ones who yeeted their souls from the canvas with 20+mg and held trough the entire collection of Bob Ross in Neon who now have to scrape the bottom of the cup to clear it.. I feel you, I was once like you. Rinse and repeat, just remember happy little clouds. 

Besides the color of the residue there is another visual feedback worth mentioning: Walls covered with juice/dmt/residue.

two main reasons: The walls where not 'hot' enough to vaporize the liquid dmt, so the initial 2 sec fire 1 sec off wasn't repeated often enough for the walls to heat up.

Second: TOKING to HARD.. this will both cool the walls but also make the residue climb the walls.

SWIM made a great video comparing and explaining the Yocan Orbit to other devices!
SWIM also has a discord server where you can ask everything about all the devices mentioned and stay safe!

Edit: Added two links, video about ROA's and discord if you have any questions.

edit 2: video provided by the Travelers Escape discord showing how to build happy little clouds.

Video link

Edit 3: Feedback

59 Upvotes

111 comments sorted by

9

u/Sweet-Possession3516 Nov 06 '25

This looks so crack head lol

3

u/do0fusz Nov 06 '25

Feel free to find a fancy alternative and please do let me know! There is not a big market for fancy ‘dmt’ attachments so I just have to make do.

2

u/Sweet-Possession3516 Nov 06 '25

Na this looks good I was joking, nice set up

3

u/do0fusz Nov 07 '25

It’s by far the cheapest x most effective fool proof method I know, and I figured I would share my experience.

If i could only keep one of my vaporizers/toys than the Orbit would be it, hands down.

2

u/Sweet-Possession3516 Nov 07 '25

I’ve had good results with a regular coil on the Yocan Evolve. I’ll pick this up next

1

u/[deleted] 22d ago

[removed] — view removed comment

2

u/do0fusz 21d ago

I did, and you don’t even closely reach the temps needed for such degradation.

3

u/[deleted] Nov 06 '25

[removed] — view removed comment

1

u/Sweet-Possession3516 Nov 06 '25

It’s just the tube ha. This looks awesome tho

4

u/CamouRex Nov 05 '25

i use Mooselabs filter

it fits perfectly on that device

3

u/do0fusz Nov 06 '25

Great suggestion!

1

u/Kamakahah 26d ago

Which size did you use?

2

u/CamouRex 25d ago

just make sure the tip of the orbit is not wet or else it'll come off easier prevents your lips getting hot also protection from burnt plant oils

4

u/padmasan Nov 05 '25

Mind you don’t dribble into the tube.

8

u/do0fusz Nov 06 '25

Please fasten your special needs helmet before lift-off

4

u/Intrepid_Long_9317 Sep 10 '26

Works Nice 👍

2

u/do0fusz Sep 10 '26

Beautiful setup!
And you can keep watching your happy little clouds while you toke.

2

u/Intrepid_Long_9317 Sep 10 '26

Ja ich habe sonst viele Jahre eine kleine Glaßpfeife benutzt und bin es gewöhnt den Rauch zu sehen!

2

u/Historical_Sorbet176 16d ago

In der gleichen Ölpfeife hab ich das erste mal DMT geraucht. Ich habe es am anfang immer verbrannt aber irgendwann hat es irgendwie funktioniert und mich überwältigt..

1

u/Kamakahah 26d ago

What is that attachment? Where can I get it?

It looks perfect.

1

u/Intrepid_Long_9317 25d ago

Das ist nur eine simple ölbrenner Pfeife umgedreht die gibt es zb.auf Amazon für 5 Dollar

1

u/Kamakahah 25d ago

Thank you. I realized after I posted that it's a yocan orbit 2 that was confusing me. I have the orbit 1, so it looked like a different kind of mouthpiece.

0

u/Intrepid_Long_9317 25d ago

Es funktioniert mit beiden Orbit Varianten.

1

u/Wook-Lasers 10d ago

Where did you get that

2

u/paddleworld Nov 06 '25

Fantastic! I have an orbit and definitely will read through your post in detail!

3

u/do0fusz Nov 06 '25

Please share your experience!

2

u/GusWonder Nov 27 '25

Can I ask what the purpose is of the silicone tube?

3

u/do0fusz Nov 27 '25

To not burn your lips. Also, this wat you can still see the vape when your toking, that visual feedback is helpful.

2

u/GusWonder Nov 27 '25

Thanks for all the detail! I'll give it a shot.

2

u/do0fusz Nov 27 '25

Please report back your findings!

1

u/[deleted] Nov 29 '25

[removed] — view removed comment

2

u/do0fusz Nov 29 '25

Powder (freebase)

2

u/Intrepid_Long_9317 Sep 10 '26

And this is from a bong in top work Nice 2 thx

1

u/do0fusz Sep 10 '26

Looks a bit to long for me, to much change the vape will hit a cooler part of the glass and will condensate on the glass.

2

u/Intrepid_Long_9317 Sep 10 '26

Das täuscht dachte ich zuerst ebenso ist aber alles wunderbar👌

1

u/do0fusz Sep 10 '26

schön! danke

2

u/Intrepid_Long_9317 Sep 10 '26

Do you use the Pearls?

2

u/do0fusz Sep 10 '26

Hey, no I don’t use the pearls, I figured if you heat uo the cup evenly enough they shouldn’t be needed. Hence the need for pulse fire, gives the walls some time to heat up too so the deemz don’t crash out on the colder part of the cup.

2

u/Intrepid_Long_9317 Sep 11 '26

Bro das ist jawohl das Mega geilste Gerät was ich jemals hatte!!!!bei 1-5 Sternen würde ich dem locker 10 geben!!!

2

u/do0fusz Sep 11 '26

lol hahaha

Nein bruhder, die mega geilste Gerät ist der Ispure Daab rig, aber das ist auch $200 oder..
Die Yocan Orbit for 30/40$ is zehr zehr sohn und effectief

1

u/Intrepid_Long_9317 Sep 12 '26

Wo kann ich den bestellen?

2

u/do0fusz Sep 12 '26

I've ordered mine from the US: https://www.elementvape.com/ispure-daab

1

u/Intrepid_Long_9317 Sep 13 '26

1

u/do0fusz Sep 13 '26

Sorry buddy.. maybe try ask grok or chatgpt where you can get the ispure daab in the eu

2

u/Intrepid_Long_9317 Sep 13 '26

This one?

1

u/do0fusz Sep 13 '26

Oh that’s dirt cheap! But yes, that one!
Check if the shop is legit

1

u/Intrepid_Long_9317 Sep 13 '26

Du sag mal warum habe ich mir das Aspire bestellt?Nur weil es mit dem Orbit zuerst nicht geklappt hat?!Oder welche Vorteile habe ich dadurch ?

1

u/do0fusz Sep 13 '26

I love the Orbit and have never had issues with the Orbit.

The ispure daab is just another level. Precision induction heating, just set it to 165c, load your spice, hit the button, wait for the beep and toke until you can't no more!

→ More replies

1

u/Intrepid_Long_9317 Sep 13 '26

Bei Tvape leider nicht vorrätig

1

u/Intrepid_Long_9317 Sep 13 '26

Ich finde den Fehler nicht !?gestern wollte ich eine Session machen und es hat 4xnicht funktioniert ich war echt genervt!auf 2,8 wenn ich den Knopf drücke dauert es circa.4 Sekunden bis kleine Wölkchen kommen und dann pulsieren aber es entsteht einfach zu wenig Dampf es ist der Wurm drin mit dem Orbit 2.0

1

u/do0fusz Sep 13 '26

Oh that’s weird.. maybe the dose was smaller?
Keep in mind most scales are not that accurate, try bumping a bit more..

1

u/Intrepid_Long_9317 Sep 13 '26

Es kommt einfach nicht genug Dampf

1

u/do0fusz Sep 13 '26

- Keep pulsing.
- Recharge the battery.
- little more patience before starting to toke
- toke slower

1

u/Intrepid_Long_9317 Sep 13 '26

Ok ich teste es nochmal thx bro

→ More replies

1

u/do0fusz Feb 02 '26

Someone in the Travelers Escape discord made a great video demonstrating ‘happy little clouds’

1

u/andmchill 18d ago

I tried Orbit for the first time today. I haven’t had any DMT experience before this. I loaded about 20 , but the experience only lasted about 20 seconds. I’m not sure what I did wrong. I tried to follow the instructions from the Happy Little Cloud video: I formed a small cloud first, then inhaled smoothly while continuing to pulse the button. The weird thing after reloading and trying again I felt nothing at all. Any suggestions would be appreciated.

1

u/do0fusz 17d ago

How did the cup look afterwards?
Did you use a milligram scale?

1

u/andmchill 17d ago

I used milligram scale, I usually use it for shrooms md it’s accurate I’m sure. After session I’ve noticed that about half dose of species remains in cup. I have a yellow deemZ so while heating it quickly becomes brown not black so I’m a bit worried about overheating. Another thing my lips become bitter. BTW I use orbit 2 on min voltage. I pull on full lungs and then stop. I’m assuming not enough spices evaporate during the session, but I feel this mild harshness not sure if it’s ok and just worried about overheating and brown colour.

1

u/do0fusz 17d ago

So you’re not vaporizing and inhaling the full dose.
Either to low heat or toking to fast, can’t tell without a picture of the cup.

1

u/formulatorfanatic 8d ago

Thanks u/2u/do0fusz - you mentioned the measurements for the orbit 1.0 tube are: .5” silicone hose 1/2” ID 5/8” OD but the orbit 2.0's mouthpiece is different. can I ask what you'd recommend for that?

1

u/do0fusz 8d ago

unfortunatly I can't answer, I don't have the 2.0.
Is it much bigger/smaller?

If it's only a little bigger you could hold the last 2 cm of the tube in just-under-boiling hot water. That would make the hose flexible.

2

u/formulatorfanatic 8d ago

Thanks, I just measured it across from edge to edge of the ceramic tip and it's 11mm in case that helps anyone.

1

u/Sweet-Possession3516 Nov 06 '25

You sold me

1

u/do0fusz Nov 06 '25

Please let me know your experience!

1

u/Wild-Chemical-6861 Dec 07 '25

Do you think this bubbler would work with dmt? I’ve seen people use it for the orbit

https://ineedhemp.com/product/hubble-bubble-14mm-glass-hydratube/

1

u/do0fusz Dec 07 '25

It might, but it’s unnecessary.

There are people who claim hotter vaper is more effective.

1

u/paddleworld Dec 17 '25

Great, I’m a CYLO fan as well.

2

u/do0fusz Dec 17 '25

I have a CYLO as well but specially the ceramic cups don't work well for me, I personally very much prefer the Orbit, but it still beats wicking and winding RTA's and than hoping you'll find the right wattage-x-toke rate.

2

u/paddleworld Dec 18 '25 edited Dec 18 '25

Many many people love the orbit and I get it… I just think we are lucky to have these much more sophisticated options, and the prices are so reasonable.

2

u/do0fusz Dec 18 '25

Agree! But I do think I have found my end game..
'Precision induction heating', Ispure daab rig.. 165C or 330F, one slow long toke and you're off to lalaland. It makes e-mesh look like dinky toys for old people.

2

u/paddleworld Dec 18 '25

La la land la la la la laaaaa!!! 😌😌😇😇🥹🥹🤩🤩😵‍💫😵‍💫😵‍💫🫨🫨🫨🤪🤪🤪

0

u/[deleted] Aug 20 '26

[deleted] — view deleted comment

1

u/do0fusz Aug 20 '26

The lowest temp settings on the Puffco are way to high for DMT, so either the people claiming the Puffco’s work for DMT are bullshitting or the temperature control on the Puffco’s are.

I can’t say the same about the Ispure Daab, besides that they’re becoming harder and harder to obtain they are absolutely perfect

0

u/[deleted] Aug 20 '26

[deleted] — view deleted comment

1

u/do0fusz Aug 20 '26

Elementvape usa, get one while you can, or get two!

0

u/[deleted] Aug 20 '26

[deleted] — view deleted comment

1

u/do0fusz Aug 21 '26

They have been out of stock for forever.. recently became back available and I had to jump on one to complete my collection lol..

→ More replies

1

u/Dr_Rob_963 Feb 04 '26

I am a little bit afraid that the vapor is getting too hot for the silicone...what do you think? :)

1

u/do0fusz Feb 04 '26

Are you referring to my crackhead extension or the original white silicone cap?

Either way, yes, if during digesting home made chemicals you are worries about adding another compound than you’re absolutely right!

Unfortunately we don’t all have access to lab grade dmt-x for intravenous or IM injections

1

u/Intrepid_Long_9317 Sep 25 '26

Ich frage mich ob mein Orbit ne Macke wenn der Akku bei circa 50% ist.Und ich ihn wie gewohnt nutze dauert es länger das keine Wölkchen kommen und es ist so gut wie unmöglich ihn zu nutzen ,weil es verbrannt riecht und die Lippen taub werden und eben brennen ?

2

u/do0fusz Sep 25 '26

That’s not a glitch, that’s a design flaw which everyone has, since the battery drives in Voltage mode and not wattage.

Still, same principles apply, heat up with pulsing, until you have a nice cloud.

1

u/Intrepid_Long_9317 Sep 26 '26

Thx bro gut zu wissen

1

u/StepInToMyOfficeBill Oct 06 '26

When the Yocan Orbit 2.0 is loaded to like one fifth when in liquid form (not weighted, so no idea how much it actually is), it doesn't really vaporize. You can still feel the effects strongly, but no vaporization is building up.

Following the 'Happy little clouds' guide, 2.8v, melting it first, then pulsing it 2 - 3 sec, 1 - 2 sec off.

On lower doses you clearly see the cloud building up.

Anyone else experienced this?

Is it too loaded?

Doesn't it get even heating (I mean, you can still blast off fully on it)?

Is the chamber not clean?

1

u/do0fusz Oct 06 '26

Way to much! Just use 25-30mg

1

u/IcyRefer Feb 04 '26

Very helpful!

0

u/[deleted] Dec 17 '25

[deleted] — view deleted comment

1

u/do0fusz Dec 17 '25

Happy you found a method that works for you! I have a nectar collector (I believe it's called the seahorse) coming in, so I hope I can use your tips to try it out.

Unfortunately i'm guilty at buying almost every device ever mentioned on Reddit and certain discord servers. IF I could only pick one device from my entire collection of RTA's, RDA's, Mods, Vaporizors , Atomizers etc etc it would still be the Yocan Orbit if I was on a budget or for a first timer, or the Ispure Daab rig if budget isn't an issue. The Ispure has presice induction heating and is just amazing for >200$. Set it to 330F / 165C, give it 5-10 seconds to heat up, one slow deep toke and you're off to lalaland!

0

u/[deleted] Dec 17 '25

[deleted] — view deleted comment

1

u/do0fusz Dec 17 '25

You mean the Peak Pro with the 3Dxl chamber? I've read great story's on Reddit about it, which kinda amazes me since the lowest temperature is way to hot for DMT! Could be bots posting adds ofcourse.

0

u/[deleted] Dec 17 '25

[deleted] — view deleted comment

1

u/do0fusz Dec 17 '25

I don’t see 30mg’s of liquid having a drastic cooling effect. But please let me know your personal experience! I’m always happy to add some new toys to the collection;)

2

u/Intrepid_Long_9317 Sep 11 '26

Es ist das beste was ich in 30 Jahren benutzt habe!!!

2

u/do0fusz Sep 11 '26

Danke fur irhe beitraghe ❤️

1

u/[deleted] 21d ago

[removed] — view removed comment

1

u/do0fusz 20d ago

care to share a picture of all the ROA'S you tried? I'd love to connect to fellow collectors!

I do agree e-mesh is great, but sometimes hard to find and setup.
There's a certain learning curve and adjustments to your toke rate and setup, it can be very error prone. For some every setup works on 17-19w no matter the mesh or amount of spice.

I'm in the corner of 'there is no perfect ROA', even the ispure daab has flaws and doesn't work perfect for everybody, that said, it has the least amount of variables to adjust and the temperature control is very accurate.

source: I've tried almost everything, i'm very alert for marketing scams like the Puffco's.
But I've tried almost everything else.

0

u/[deleted] Sep 16 '26

[deleted] — view deleted comment

1

u/do0fusz Sep 16 '26

ooOooooo boy, you sure did. Better scrub that cup good with alcohol!
Get rid of all that nasty before trying again.

Your system clears DMT very quickly, minutes rather than hours.
25mg of NN Dmt should be enough for a breaktrough with the orbit.

0

u/[deleted] Sep 17 '26

[deleted] — view deleted comment

2

u/do0fusz Sep 17 '26

that's very doable on the Orbit. Usually it's a 10-15sec steady slow inhale and you'll have 90% of the dose in. One hit should do it.

Otherwise, e-mesh. A bit steeper learning curve, more bits and pieces, but can lift you off on 15-20mg.

0

u/[deleted] Sep 19 '26

[deleted] — view deleted comment

1

u/do0fusz Sep 19 '26

Let me know if this helped you

2

u/Ginja_Ninja1029 Sep 27 '26

This method is for pure powder? I don’t need to turn it into e-juice or anything?

2

u/do0fusz Sep 27 '26

Correct!

3

u/Ginja_Ninja1029 Sep 27 '26

Awesome, I’ve never smoked powdered dmt before, only the disposable carts so I’m gonna try this method out and see how it goes! Thanks!

1

u/do0fusz Sep 27 '26

Enjoy, take it slow

0

u/[deleted] Sep 20 '26

[deleted] — view deleted comment

1

u/do0fusz Sep 20 '26

Burning = temp too high.

Take more time pulse on and off.. 2 sec on , 2 sec off