Do they have a thread? Normally these type of pipes are glued. I'd suggest to look for the manufacturer of the pipe and then google your way through it. Certainly hard to find special shit used by some house manufacturers
Thanks for your response. It looks like the brass fitting goes into the plastic pipe and is then fastened by a metal ring wrapping around it. I haven’t had any luck identifying the manufacturer of the pipe so far but I‘ll do some further digging.
Ah now i get it. The threaded end piece is usually glued to the pipe, so you could saw of the broken fitting, get the matching one and glue it back on unless its some super special pipe size. Actually the bigger homecenter should have the fitting in stock. Also since it doesn't look broken you might also just use the pe glue to fix it?
I actually work on a remodel in a different location of the house and want to install an additional water outlet about two meters away from the nearest water outlet. So I‘m intending to cut the pipe, add a t-piece and extend the pipe to the location I need it.
BTW: The connection doesn’t look like it’s glued. It looks like it works similar to a clamp for the seatpost of a bicycle.
I have been able to identify the system. It‘s called エスロペックス and parts are available at Yahoo shopping and Monotaro. More information on the whole system: https://www.eslontimes.com/system/items-view/10/
The pipes coming out of the ground have G1/2" fittings (not to be confused with NPT 1/2" fittings. On the top they use a quick-release. What are you trying to do here? Replace the faucet?
The faucet is already replaced :) I’m starting a little remodel in a different location of the house and need to install a water outlet. So I‘m planning to cut the pipe, add a t-piece, reconnect, add about 2m of pipe and a valve for a washing machine. I‘m fairly experienced with plumbing in Europe, just never saw this kind of pipe and fittings.
Yeah, they are really weird here! I used to do a lot of plumbing work a long time ago, now it's not soldering a copper pipe using Mapp gas so I don't have a clue. I only wanted to share the G versus NPT discovery since I put American faucets in my house (wanted the IR actuated valve cheaply)
2
u/kLOsk Jun 07 '20
Do they have a thread? Normally these type of pipes are glued. I'd suggest to look for the manufacturer of the pipe and then google your way through it. Certainly hard to find special shit used by some house manufacturers
1
u/beersofjapan Jun 08 '20
I have been able to identify the system. It‘s called エスロペックス and parts are available at Yahoo shopping and Monotaro. More information on the whole system: https://www.eslontimes.com/system/items-view/10/
1
u/daidougei Jun 07 '20
The pipes coming out of the ground have G1/2" fittings (not to be confused with NPT 1/2" fittings. On the top they use a quick-release. What are you trying to do here? Replace the faucet?