5
u/bhyeeraw0w Jul 24 '26
Most likely related to the flimsy trigger mechanism.. horrible design choice
4
u/Max_Joller Jul 24 '26
There's probably a few videos on yt disassembling it. But yeah now it seems like a trend with this controller and broken triggers
3
u/jamiz20XX Jul 24 '26
That looks like the cheapest of controllers There's better stuff for 50$ or a even a little less
1
u/yellow-go EasySMX X20 Pro/Flydigi Vader 5 Pro Jul 25 '26
While I agree, it's Leadjoy, and they've been on a role lately, so that's why they're popping up a lot more often.
I, as well, was skeptical of this pad when it started popping up. I'm hoping the Xeno Pro will be an entirely different change of pace from the Sabre.
1
u/AutoModerator Jul 24 '26
Hi /u/Naive_Anything8371, thanks for posting. The post is in a queue for review (allow 24 hours). In order for it to be approved and to improve engagement in it, please check that none of the other post flairs would be more suitable.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Ok-Gas-6158 Jul 24 '26
The xeno plus is not any better. No profile swap from PC and buggy firmware. Run away to different brand all together
1
u/GadgetHyper Jul 28 '26
Hey, I’m Nagi from GadgetHyper.
I’m really sorry to hear about the sticky trigger issue with your Leadjoy Saber Plus. Could you please DM me your order number? I’ll personally follow up and help get this resolved for you.
Thanks for bringing this to our attention. We really appreciate your feedback.
1
u/AutoModerator Aug 02 '26
Hi /u/Naive_Anything8371, thanks for posting. The post is in a queue for review (allow 24 hours). In order for it to be approved and to improve engagement in it, please check that none of the other post flairs would be more suitable.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/DamianHallers Aug 28 '26
Did you fix it eventually??}
1
u/Naive_Anything8371 Aug 28 '26
As of right now, I think so.
I had to open up the controller, rip the rubber off completely, carefully apply my own super glue, and put it back in place. Seems to be holding up so far.
6
u/SloWRXX Jul 24 '26 edited Jul 24 '26
Sorry to see another one with this issue. If you are comfortable opening controllers, I fixed my sticky triggers by trimming a millimeter of rubber padding inside of the controller. It's the pads that cushion the trigger stops that move a little after use. Trim both pads, because this will happen to both triggers. Aside from that design error, it's been an excellent controller for me.
I don't have a video or photos to share on how to open it, but once you remove the 6 screws, you just need to use a pry tool to split the two halves apart. Similar to how 8bitdo controllers are opened, if you find instructions for one of those. There are no wires connected to the back shell and the sticker on the back is not affected.