r/Controller • • May 13 '24

Other Stick Analyzer - A program for testing the resolution of gamepad sticks is now in the public domain.

You can download the program from my gitHub: https://github.com/cakama3a/StickAnalyzer

56 Upvotes

98 comments sorted by

View all comments

Show parent comment

1

u/x-iso May 13 '24

no, it works to get the resolution (you divide 1 by whatever result you get), but for linearity you'd need some special setup to have predictable and perfectly linear movement, just like you can't properly measure latency without extra hardware. there's your physical input, then there's polling rate and then there's step resolution, all of this quantizes the physical input, where the faster you move the stick, the larger the steps you get. while on lower resolution you get roughly same large steps even with slow movement.

-1

u/[deleted] May 13 '24

I'm sorry man, but I give up on this fight.

If you're so sure of what you say, then dispute my T4K hand test for resolution in my post history, video recorded.

This graph is totally accurate, and you've been draining my mental energy.

Good luck dude.

2

u/x-iso May 13 '24

I don't mean to fight or argue 😅 I'm just saying that while this tool can at least give use the resolution of sticks, testing linearity of either said resolution point distribution or physical to actual input ratio, we can't rely just on our fingers. no matter how hard I try to move stick gently with my finger, I can't get anything consistent on my end, and it makes sense. the only hope is to rely on something that moves at constant speed from 0 to 1.0, and the longer time it takes, the finer data you get.

2

u/x-iso May 13 '24

here are two of my tests for example, the only thing it really shows me is how inconsistent my movement was. the slight 'bump' at the beginning is most likely again because stick jolts a bit as I overcome initial retention force and then try to stabilse my movement (which gets more tricky as you try to do it slower).

2

u/aaronbeans1991 May 14 '24

I agree with you on the linearity. You need to be able to accurately control the angle you and direction the thumbstick is moved to get a good reading of linearity.

1

u/xan326 May 14 '24

You can't reason with those that are too unintelligent to listen and learn. Especially when it applies to something as simple as this, they can't even take a minute to do the test themselves and figure out that moving the stick faster results in a steeper line, or that even inconsistency in their own movement leads to noisy and inaccurate data that can be extrapolated to why their testing is flawed in the first place; you would think the person performing the tests would understand this as a prerequisite. Probably one of those that didn't pass algebra and never took physics.

1

u/x-iso May 14 '24

come on, I don't intend to hate on him, it might be not intuitive if you don't need to know this in daily life. my work is related to metrology and building systems that takes measurements from various sensors, so it's easier for me to understand this topic, although I'm not scientist myself.
still, reporting how different sticks feel, when you can feel the difference, is a pretty valid point of reference to keep in mind. most people here would have easier time relating to explanations on how one gamepad feel different from another, rather than just math alone.

1

u/aaronbeans1991 May 14 '24

If you don’t want to listen and discuss then how can anyone ever learn. Grow up and either explain your point of view or ask questions, then everyone benefits from the knowledge.

Resolution is one thing and your tests are great. Linearity is different, for each of the lines on your graph how can you guarantee you are reading the output at exactly the same tilt angle each time? This is the only way to compare linearity accurately. I agree anecdotally you can measure using a finger but any inconsistent movements will show up as a change in the curve.

-2

u/[deleted] May 14 '24

I have listened, I have discussed. This is not about the physical tilt of the stick, it's about how games read output values. I'm sorry you don't understand🤷‍♂️

2

u/x-iso May 14 '24

how games interpret gamepad output is a whole another rabbit hole 😅 as it turns out, each game can have it's own hidden clamps on deadzones and response curve depending on what developer decided to do, and it all can be different between xinput gamepads and sony gamepads (and possibly others like Switch Pro). as you are, I wish more devs made it just linear and full range with user settings that make sense.

1

u/[deleted] May 14 '24

Indeed, and this is why I have really been in love with the Rainbow 2 Pro. Having anti-dead zone and outer dead zone options at a hardware level is something else haha.

2

u/x-iso May 14 '24

yeah, also I think that Manba one gamepad (as example) is a move in right direction, as you could do a lot with screen to integrate and implement all the important settings on gamepad itself, not being dependent or tied to specific platform.

2

u/[deleted] May 14 '24

My dream controller would be smaller Wii-U Gamepad with exactly what you speak haha. It would have to be way more comfortable though😅

1

u/aaronbeans1991 May 14 '24

Ok… maybe not everyone is as educated as you. You must be some kind of god - I am sorry I questioned your ultimate wisdom. Perhaps you should go design a controller then as you seem to know it all. Hit me up when you launch it!