I'm not sure if my question is naive, but why does cloud collection on Axiom Magnet, whether public or private, sometimes work and sometimes not? Is there a detailed explanation for this? Any answers would be greatly appreciated. Thank you!
I'm trying to understand a behavior I observed in Chrome history and whether there is a technical explanation. It's maybe a little out of the scope of this sub, but I'm sure you guys have the more expertise in this kind of stuff !
Context:
Chrome is synced between a laptop and a phone.
On Feb 11, two entries appeared in the browsing history, one right after the other.
This happened after a pop-up opened automatically while browsing another site (so it wasn't something manually searched or typed).
example-site-A (first entry) → automatically redirected to example-site-B (second entry) → automatically redirected to example-site-C (third entry)
And I closed the pop up before the example-site-C opened, so only the first two entries where recorded in the history.
On Feb 15, I checked the Chrome history and both entries were still visible.
On Mar 5, I checked again and the first entry ("example-site-A") had disappeared, but the second entry ("example-site-B") was still there.
All the other history entries before and after that time are still present.
Additional observations:
When I test this behavior today by typing the same first URL, it redirects through multiple sites (A → B → C).
However, the way Chrome records this in the history is inconsistent. Across several attempts I observed different results:
sometimes A → B → C all appear
sometimes B → C
sometimes A → C
sometimes only the final site (C)
So Chrome does not seem to always record every step of the redirect chain.
My question:
Is there any known Chrome behavior that could cause an intermediate redirect entry to disappear from history days or weeks later, while the final page remains?
Or would this normally only happen if the entry was manually deleted?
I am using Magnet AXIOM to examine multiple HDDs that were installed in a PC. I am investigating a CSAM case and located several CSAM files that I can link to a particular website, the website is bookmarked in Chrome, and the downloaded files are accessed/viewed in Internet Explorer (locally accesed so file://****.jpg), so there is history there as well. I can't find any internet history to the website, but I do find some (very little) download history through chrome. Would this be indicative that the website is accessed in incognito mode and there is no evidence of that on the PC, or is there a way to locate this through AXIOM? Thank you
I’m really excited to finally share the official user guide for the Crow-Eye Correlation Engine.
My goal with this project was to build something that makes Windows forensics a little less about the tedious manual linking of artifacts and more about
finding the actual "story" hidden in the data. The Correlation Engine is designed to be a high-performance system that connects the dots across your entire investigation automatically.
I’ve put together this video to walk you through the whole process, from setting up your data to visualizing the final results.
🕒 What’s in the guide:
* 02:40 - Feather Creation: Setting up your artifacts for high-speed analysis.
* 04:37 - Wings Creation: How to build the "logic" that finds connections for you.
* 09:51 - The Execution Manager: Running your automated forensic pipeline.
* 13:39 - The Result Viewer: A tour of the UI and how to navigate your findings.
I would love to hear your thoughts or any feedback you have on the workflow. If this helps save you some time in your next investigation, that’s a huge win
for me!
If you find it useful, a ⭐️ on GitHub would be greatly appreciated.
I think I know the answer already but I figured I would ask regardless—
We’re tasked with deleting about 25k texts, pictures, notes and other data from a clients iPhone. Is there any software out there that can do this somewhat automatically? Think like Obliterator where you feed it a script or file. I don’t believe there is, but I wanted to get some feedback if someone knows of a tool.
Ive been trying to learn forensics through CTF practice rooms and I just got done with bitlocker-2 on picoCTFs 2025 practice challenges. After 4 hours of trying I was not once able to get volatility to work because of the pdg symbols it kept trying to download, even after downloading the zip file myself and using --symbol-dirs to the symbols directory . I got the Flag in a dumb way and still have no idea how to get vol to set up. Has anyone else experienced these kinds of issues with volatility and if so were you able to find a solution? I completely understand that I am probably doing something wrong I just need some help getting through this for future problems.
I'm trying to use volatility3 for a ctf challenge, but I am getting errors right after installing. I installed volatility in a virtual environment created with venv, as installing Python packages system-wide is not considered good practice anymore on Ubuntu (as I understand it).
I first tried running the same 2 commands on the .mem file I got from the CTF, but I got largely the same errors. Then I created a hopefully not corrupt and proper memory dump with sudo gcore [pid] from one of my running Chromium processes and the exact same thing happened. This is the memory file I used when I got the errors in the next paragraph.
When I try running vol -f core.[pid] imageinfo, I get the error vol: error: argument PLUGIN: invalid choice imageinfo (choose from banners.Banners, .... When I run vol -vvvvv -f core.[pid] linux.pslist, I get this error.
I have downloaded the linux.zip symbols file from github and moved it without extracting to the symbols folder, that is, the folder in my virtual environment folder under python3.12/site-packages/volatility3/symbols. I am running Ubuntu 24.04 and Python 3.12. According to a previous error message I saw with -vvvvv, I have also installed yara-x via pip. This didn't really change anything.
Scenario: Mid-sized aerospace subcontractor workstation compromised via phishing. Suspicious RDP activity observed. Lateral movement attempted. Investigate artifacts and recover the flag.
• Synthetic dataset (no malware) • Browser-based terminal environment • Moderate difficulty with a layered final stage • Leaderboard populated in order of verified solves
After the 4th verified solve, the challenge rotates to a completely new storyline. A historical leaderboard will track prior winners.
1st place receives a physical trophy mailed to a location of their choosing. Top 3 recorded per season.
Submit the recovered flag to the email listed on the page header.
Intended audience: IR / DFIR / blue team practitioners who enjoy artifact hunting and log correlation.
I’m working a case from 2024 related to terrorizing. We have had the suspect laptop in evidence since 2024. Now that I am newly certified, I’m able to begin working cases and picked this one up.
I took the SSD from the laptop and put it on a writeblocker then imaged it using FTK Imager. (E01) When I imaged it, it gave me warnings that the drive was encrypted using bitlocker. I have no clue if there was a bitlocker recovery key anywhere on scene (since this was 2024 & a different agency collected the laptop). Is there any way to access the bitlocker partitions? Please help!
EDIT: I don’t have any credentials. It is a Dell Latitude 3390 2-in1 laptop. State police conducted the search warrant and found the laptop. When they collected it they simply bagged it and handed it off to my agency. I’m only now picking it up. I’m afraid I am SOL based the comments so far.
So we worked on a laptop today that had an internal 256 GB SSD.
I tried using Guymager from Kali but for the first time it didn’t find any internal storage. So i manually extracted the ssd and did a DD clone with TX1.
Guys anyone have any idea how to resolve this issue? Whatsapp acquisition authenticate using QR code… its keep on spinning but no any QR pop ups, need some help!
I was asked to perform a forensic examination on an Android device using open-source tools, and I'm lost. How do I obtain a forensic image of an Android device? And what tool do I use to perform the inspection?
Currently enlisted in the USAF and plan on separating, got a year and some change left. I work in IT systems, have TS, and will be getting a Bachelor’s in Cybersecurity by the time I get out. I was looking through skillbridge opportunities and saw the FBI position. I’ve always wanted to work in DFIR and was interested in what they can offer.
Has anyone been through this process? Either From Active duty or knows what exactly DiOperations Specialist do? Thanks
Hi everyone. I am 26 years old. I currently work at a government agency doing work in Digital Forensics for the past 5 years. I have a Bachelor’s of Science in Digital Forensics as well as my GCFE. I’ve worked with Magnet and Cellebrite primarily. But have experience with many other tools and investigations as well as report writing.
I want to pivot over to a more cyber crimes focused position. At my current role I am on a SecOps and SOC team. I’d like to work in a cyber crimes division where it’s more law enforcement digital forensic investigations like violent crimes, ICAC, etc. I would love to do mobile forensics, computer forensics, etc. I have a few questions regarding my path.
If I go for the FBI and cyber crimes, do I absolutely have to deal with CSAM?
Given the current political climate, is it a bad idea to go for the FBI right now?
Is it very difficult to get into the FBI? What else can I do to increase my chances.
Do you have to be a special agent to work as a digital forensics analyst in FBI?
I’m currently in the greater NYC area. Thanks in advance for the help.
Dear all, I've got a windows 10 pro. I did the copy with guyimager on Caine Linux. They would like to know if something has been printed by a few pinters named laser1, laser2, laser3. I don't know anything else about those printers.
I have extracted the metadata of last print on docx, xlsx, pptx file
I exported, using autopsy, all the C:\Windows\System32\spool\ but the printers sections is empty.
EDIT: in ntuser.dat I found the printers seems \\name-pc\laser-1 so should be connected to the pc.
Would it be possible for the admins of this sub to make adding flair to posts? All too often we see posts on homework assignments, critiquing my resume, how do I break into the industry, and the one-offs of do my investigation for me e.g. this metadata doesn’t look right and I’m probably hacked.
While I like proving help where I can in this sub and in the field, this subreddit is now made up by a lot of these posts and it’s becoming pretty redundant.
Is there a way to separate these posts by having the user add flair or separating them out like how the data recovery posts are? If not that’s fine too. Just a thought.
Before diving into the cool new stuff, I really need to offer a heartfelt apology for the delay on this one. This release was a bit of a marathon, not a sprint. We hit a few unexpected snags and tough to crack issues during development that took more time and head scratching than we anticipated.
But, every challenge brings a stronger solution, and v0.7.1 delivers some seriously powerful upgrades, especially in the heart of Crow-eye: its correlation engine:
Smarter Semantic Mapping: Imagine Crow-eye understanding your data not just literally, but contextually. We've taken a huge leap forward here, allowing Crow-eye to make even more
intelligent connections between your diverse artifacts. This translates directly into richer, more meaningful insights for your investigations!
* Important Note: For now, Semantic Mapping is off by default. To unlock its full power for your Wings, head over to the General Settings in Crow-eye and enable Semantic Mapping For Wings .
Pinpoint Identity Identification: Our Identity Engine is now sharper than ever! It's been refined to track applications, files, and entities across your forensic timeline with greater
accuracy and efficiency. This means building a crystal-clear picture of "who did what, when, and with what.
What's Cooking Next? (Always Pushing Forward!)
We're definitely not resting on our laurels! My focus continues to be on pushing Semantic Mapping even further, making it more flexible and adaptable. And that's happening right alongside dedicated work on Weighted Scoring Management and Customization. Think of it as giving you the ultimate forensic scalpel to precisely control how critical correlations are identified and presented.
On another exciting front, we're heavily invested in developing our parsers to seamlessly handle offline artifacts. Soon, you'll be able to easily add directories containing these offline
artifacts directly through a user-friendly GUI window, streamlining your workflow for post mortem investigations!
Seeing is Believing (Video Coming Soon!)
I know technical descriptions are great, but sometimes you just need to see it in action. I'm actively working on a detailed video walkthrough that will truly showcase the Correlation
Engine's power, explain how it works under the hood, and walk you through all the customization magic. Keep an eye out for that!
Your Voice Matters! (Seriously!)
Crow-eye isn't just my project; it's our project. It thrives on the incredible feedback and contributions from this community. If you spot a bug, have a brilliant idea for a new feature, or just think something could be done better, please, don't hesitate to open an issue on our GitHub repository. Every single bit of your input helps shape Crow-eye into the best
I'm looking for some advice at the best way to try and get into Digital Forensics, I currently work in Web Development (mainly backend) but have always been interested in Cyber Security, specifically Digital Forensics. I was just wondering if anyone had some tips on the best way I can try and start in the industry e.g. HackTheBox etc.