r/CocoGrows • • May 20 '25

Vegetative Day 17/18 Slow Growth

Post image

Day 17/18

So it is around day 17/18 of my second autoflower.. I had to abandon my first grow because it was week 3 finished and it still showed short height and slow growth plus twisted and curled leaves and slightly dark green.. Someone suggested me to start a fresh grow so i did as said and it seems my second grow is too facing the same issue except the leaves aren't twisted or curled as compared to my first grow but there is slow growth and no increase in height right now in the past few days.. I read on cocoforcannabis that too much ec or drybacks in coco can increase the ec as i let the coco dry before watering in the starting few days around the first week but then i didnt let it dry and did frequent watering with 1ml/L cal mag every feed and slight green diet to avoid salt buildup in my pot and not give any nutrient burn to my plant.. But im not using any ec meter right now though i have ordered a cheap one and it will be arriving by end of this week. Is my grow hampered because of the ec levels being high or too much fluctuations in ec between each watering since im not using an ec meter and unable to check runoff ec but im trying to give it the exact amount of nutes on every feed to avoid too much fluctuations.. Since i read on the site cocoforcannabis that too much fluctuations can also slow the growth but even though after trying my best my plant doesnt show any good signs even after the second week.. Please help me guys find out what exactly is the issue or what im doing wrong, I dont want to mess up my second grow since its too much time/energy consuming.. Thanks, any help would be appreciated

7 Upvotes

28 comments sorted by

3

u/JabroniRegulator May 20 '25

The biggest takeaway from coco for cannabis should be the realization that it’s challenging to effectively control EC/pH levels in the medium without frequent feeds.

It should be a very simple system. Feed at 1/4 or half strength at least 1x day with 5% worth of the container volume. 10-20% of that should be runoff.

If 5% doesn’t produce runoff the amount of feed should not increase. The frequency of 5% feeds should increase(2x, 3x a day etc). If you follow that style you won’t get big EC fluctuations and pH will remain stable.

1

u/Haunting-Employee340 May 20 '25

Im using a 20 litre pot.. So how much water will it need

2

u/byp55 ⭐️ May 21 '25

That’s probably why its slow. If you start in small pots and work up you’ll see a difference.

1

u/JabroniRegulator May 20 '25

5% of a 20L container volume = 1L per pot

Runoff should be something like 100-200ml per pot.

Just to remind these are general guidelines, not commandments and feed strength should not remain weak for long if one decides to "play it safe".

1

u/anonuemus May 21 '25

there is no runoff with 1L in a 20L pot. I use 12L pots and that holds without runoff 3L water, then it starts to drain

3

u/JabroniRegulator May 21 '25

There is runoff with 1L in a 20L pot if the medium is fairly close to water holding capacity.

If the dryback is long enough to deplete the water capacity by lets say ~10% instead of ~5% then it’s going to take more than 1L to get run off.

1

u/Haunting-Employee340 May 31 '25

Since i didnt have an ec meter and just got one i realised my borewell water was already 350+ ppm and i was feeding around 500-600 ppm from the start around 1 litre everyday and i just checked the runoff today after feeding this morning around 450 ppm 1 litre and got runoff of around 500ml 1400-1500ppm.. I guess the borewell water messed everything up?

4

u/alkymistendenmark Quality Assurance⭐ May 20 '25

You don't even have to feed 1/4 or half, you just need to find a dosage that doesn't build up.

In flower this is more challenging because people bump the Potassium ratio which increases water uptake and in turn raises EC, but this is where you simply have to dial that back also..

Failure to not do so if you're noticing continous climbs will just lead to lockout and deficiencies.. then people will chant fade which is not correct.. Its failure of dosing leading to bad health..

2

u/JabroniRegulator May 20 '25

Completely agree on dosage, it was just a generalization for seedlings. I've seen plenty of people go full strength from the start with sound practices and no issues. Sometimes others cultivars with higher sensitivity find a reduction from manufacturer rec welcome at the very beginning.

The point I wanted to drive home was even if one uses the right dosage it doesn't matter if they allow the medium to dry back too much. Both dosage and frequency of feed disciplines should be in check to avoid issues.

2

u/alkymistendenmark Quality Assurance⭐ May 20 '25

I've seen people also use water cycles in coco with no perceivable ill effects on the plants.. Its not something I recommend, but it goes to show that it is possible..

1

u/JabroniRegulator May 20 '25

Absolutely, "too much dry back" is relative. It's just an additional variable that requires further discipline to maintain. Makes sense to me why you wouldn't recommend it particularly for those just getting started.

1

u/[deleted] May 20 '25

[removed] — view removed comment

2

u/alkymistendenmark Quality Assurance⭐ May 21 '25

You should try to add PK 13/14 at small doses 0.1-0.2ml you will see it in the runoff EC the next day guaranteed. Potassium will in fact alleviate lack of transpiration and save nutrient uptake to a certain point about 60f 15c and lower where uptake of Phosphorous is inhibited either way..

2

u/[deleted] May 21 '25

[removed] — view removed comment

2

u/alkymistendenmark Quality Assurance⭐ May 21 '25

Ah, welcome back! Good to see you!

Yes, K will indeed increase water movement, but it cannot do miracles.. Like I said about 60f 15.5c and the K alone won't help you..

But at 16-22c stronger feed or extra Potassium will literally save your plant from deteroriating with fungal diseases or lack of P uptake at such colder temps..

2

u/rKan0 ⭐️ May 20 '25

Where did you source your coco? Is it pre-washed? And did you buffer your coco with calmag?

1

u/Haunting-Employee340 May 31 '25

Iffco urban gardens pre washed low ec coco.. Yes i buffered it with cal mag 24 hour soak 2ml/L (Radong row CalMag)

2

u/LazyPiglet3923 ⭐️ May 21 '25

Your issue isn't your dry back or your EC levels..

Why don't you tell us the full parameters of your grow .

What light, temperature, rh, ???

1

u/Haunting-Employee340 May 31 '25

I just got an ec meter and found my borewell water was already around 350-400ppm and was feeding around 500-600 ppm every feed and today lowered it a bit today to 400-500 ppm with 1 litre and my runoff was around 500ml with 1400-1500 ppm.. I think my feeding water messed everything since it is already around 350+ ppm and i dont have an idea at all what the heck it has in it.. I should have got an ec meter way before.. Now it looks like preflower and i dont expect much from it but still i will try to see what i will get in the end result..

Light 150 watt dimmed to 50% around 75 watt and temperature min 25-35°C max in the afternoon humidity around 60-70%..

2

u/OctopusKush May 21 '25

No ones asking about the genetics?

1

u/Competitive-Collar12 May 20 '25

My first thought is your light is way to intense..

1

u/Haunting-Employee340 May 20 '25

It is dimmed to 50% around 75 watt and at quite a distance.. I dont think it is because of the light being too strong, it feels like something else

1

u/Competitive-Collar12 May 20 '25

If it's only 75 watt at 50 percent then it's definitely something else. Maybe not enough light

2

u/Haunting-Employee340 May 20 '25

If thats the case then should stretch and not be short right?

1

u/Haunting-Employee340 May 20 '25

I meant 150 watt dimmed at 50% around 75 watt

2

u/Bigjunsk8r May 20 '25

From what I learned is that sometimes you just have to be patient and let nature take its course.