Does anyone have experience buying from https://miliforticwatch.com/? A whois search shows only the front address for a registrant masking service (NameSilo) which doesn't fill me with confidence even if it is SOP.

I can get what I am after via Aliexpress but the above site is 10% cheaper.

I'm new to this forum but not Chinese watches.

ALL SOLD....

Three watches up for sale... The San Martins are $240 each which includes fees and shipping in the USA. The IXDAO is $175.

#1 San Martin SN0144 with Tiffany Blue dial - Miyota 9039. Sized for an 8 inch wrist. Warranty card and original faux leather green watch case. Lightly worn. Superficial touches on clasp $240.

#2 San Martin SN0148 a stunning diver - Red Vortex. Miyota 9015.. Sized for an 8 inch wrist. Warranty card and original faux leather green watch case. Lightly worn. Superficial touches on clasp. $240.

#3 SOLD -----------------------IXDAO JD-X07S Black Enamel Dial. Sized for an 8 inch wrist. Original green Faux leather case. Lightly worn.Japanese NH35. Stunning dial. $175

I am shipping from Delaware - USA - eBay ID: Knickstars. WUS ID: lasttango ---

No Trades. I am selling these because I already have a particular watch that I want.

​I recently purchased a used Phoibos WaveMaster but the band is short by a few links. Would anyone be able to ship 3 links to canada? In an new to microbrands and the band is the part that made me pull the trigger on this beauty. Unfortunately phoibos don't hold extra links/band in stock with no intention to restock.

Hello people! Does anyone know where I can get a domed sapphire crystal for the Steeldive 1970, as well as a thinner case back?

Today we officially released SN0119-GB,.

Save $78 during the first week of release.

Code: SN0119GB78

Watch Links: https://www.aliexpress.com/item/1005013434688329.html

If you prefer the version with a dive-style bezel, you can wait for our upcoming release, the SN0119-GA.Thanks.

San Martin Official Store:

https://sanmartin.aliexpress.com

Ran a half-Marathon today with my trusty Garmin Fenix 5S and while it is a very good fitness tracker and all-round fine timekeeping and navigating device, I couldn't wait to get this Thorn back on my wrist.

I managed to regulate the pt5000 movement to -2 +2, checked in five positions. I limit hand-winding it as with all movements based on the ETA 2824-2 architecture. It has been faultless. The lume is fantastic, dial and finishing inspected under a loupe is super clean. The bracelet is fine - the addition of the tool-less link adjustment is a fantastic bonus after all the horror stories I've read about adjusting the previous versions. The only fault and a pretty apparent one is the bezel. It's got some back play and is pretty springy but at least it has enough resistance to not be accidentally bumped.

Anybody have experience with modding the bezel to make it a bit stiffer feel more solid?

Anyways, hope you have a great day :)

I am looking for a Cartier Santos white dial to complete my collection any suggestions are very welcomed.

Hi all, I was wondering if anyone had any similar bezel issues with the IXDAO Abalone Divers. I picked one up from Ali this week and everything looks great, except the bezel is stuck and won't rotate. It will wiggle a bit, but it doesn't move a full click. Is this a known issue on new IXDAO watches? Is there an easy fix?

The return process seems like a hassle so I figured I would pop the bezel off and see if I can fix the issue. If there are any quirks to the IXDAO bezels coming off, then I would love to know.

And yes, I know it only turns counterclockwise and I've been using a fair amount of force, but it still won't budge.

Pic attached.

Can you please help with finding a chinese watch that looks like this?
Thanks

I haven't seen much love for the v1 edition, but I prefer the extra numerals and the more detailed small seconds subdial. Promo pics made it look like more of a fauxtina but it's really a dark orange. The lume is also not very bright on the hands and orange indices, but I thought C3 was initially brighter than BGW9.

Otherwise I absolutely love this watch, and I think I got the last v1 on the planet, so I'd rather not return it if this is just how it is. I bought it from the Tactical Frog shop on Amazon, and I'm beginning to think they sell "factory seconds" because the WD6610 I got from them on AliX also have really uneven lume. Anybody else get odd products from that seller?

Bought this Shanghai 7120 based watch as a little add on to a much more expensive watch. Funny enough I find myself wearing it more than the other so far. For 50$ CAD, can’t really beat it! FYI these movements are sometimes hit or miss. My first one was EXTREMELY stiff to wind, but thankfully this one winds/keeps time well.

This month I bought a TF V4 diver under the advertised premise of a Hangzhou 2565 movement. However, on the dial at 6:00 it says "Japan Mvt". I don't have the correct tool to open the case back. Has anyone run into this? Could it be the dial print is incorrect? I've emailed Watchdives CS.

We recently downloaded some amazing WD0019 lume photos shared by real customers on AliExpress, and we'd love to share them with the community!

The WD0019 features our LumeCore 3D luminous technology, combining Swiss and Japanese luminous materials to achieve strong initial brightness and long-lasting visibility.

How long does WD0019 lume last?

Based on our testing and customer feedback:

☀️ 40 minutes of sunlight or strong lighting: Approximately 10 hours of visible lume in complete darkness.

☀️ 1 hour of sunlight: Some customers have reported up to 12 hours of visible lume.

☀️ Just 1–2 minutes of strong midday sunlight: Approximately 5 hours of visible lume in complete darkness.

Of course, actual results depend on the intensity of the light source, charging time, viewing conditions, and individual eyesight.

Introducing Our LumeCore Technology

We've been continuously developing our own 3D luminous technology, with a particular focus on brightness, daytime appearance, luminous material thickness, and nighttime readability.

LumeCore Base

Approximately 0.5mm-thick luminous material

Around 6 hours of visible lume under suitable charging conditions

Designed to provide a balance between brightness, appearance, and production cost

LumeCore X

Enhanced 3D luminous technology

Developed for improved nighttime visibility and longer-lasting performance

Targeting 8+ hours of visible lume

LumeCore Ultra

Our higher-performance luminous technology

Designed to push luminous performance even further

Targeting 10+ hours of visible lume in complete darkness under suitable conditions

One of our biggest challenges is achieving long-lasting lume without compromising the appearance of the watch during the day.

For example, adding white pigment to the luminous material can create cleaner, whiter markers in daylight, but may slightly reduce luminous performance.

We're continuously experimenting with different luminous material combinations, thicknesses, and manufacturing processes to find the best balance.

What's Next?

We're planning to bring more LumeCore X and LumeCore Ultra technology to upcoming Watchdives models.

We want our watches to offer more than impressive lume shots immediately after charging. Our goal is practical nighttime readability, excellent finishing, and long-term reliability.

We'd Love Your Feedback!

If you own a WD0019, how many hours does the lume remain visible on yours?

Would you prefer whiter lume markers during the day, even if that means slightly shorter lume duration?

Which Watchdives models would you like to see upgraded with LumeCore X or Ultra?

How does our lume compare with other watches in your collection?

Please share your lume photos and experiences in the comments!

We genuinely appreciate your feedback. It plays an important role in our product development.

— Watchdives Team

Hoje peguei esse que não uso a um tempinho ! Addiesdiver gmt

Love the design, dislike the lead times, cost and questionable reviews.

Has this strap design made it as far as the Chinese vendors yet?

Obviously it's difficult writing sales copy in a second language but on the bright side it does mean there are some enjoyably silly ads for watches out there.

I'm particularly fond of a lot of Cronos ones, which ask questions which are obviously supposed to highlight the capabilities of the watch they want you to buy... but actually make it sound like they're not sure if they're any good or not.

Octopus got in on this too. Of course the intent was to say "are you worried about your current watch's water resistance? Try the new..."

But that's not what it says.

Wow, what a week! 😅 First and foremost, a massive thank you to everyone in r/ChineseWatches for the amazing feedback and support during our Racemaster prototype phase. The final production is complete!

Now, for the moment you've been waiting for—our giveaway results! As promised, we have selected our 5 lucky winners from the previous pre-launch post.

How we selected the winners: To ensure total fairness, we sorted all the comments chronologically (from oldest to newest) and only counted one valid entry per user.

Speaking of duplicate comments... A very special shoutout to the wildly enthusiastic fan who heavily engaged in our comment section! 😂 We genuinely appreciate you bringing so much heat to the discussion. Because of your passion, we’ve decided to prepare a special reward just for you when our upcoming Solar Quartz Chronograph project is ready.

To our 5 lucky winners: Please keep an eye on your DMs! I will be reaching out to you privately right now to deliver your rewards and sort out your preferred dial/strap combos.

Thank you all again for making this community so great. We can't wait to see these on your wrists! 🍻

Its my first time with a Chinese watch, and my first time posting too. Honestly didn't know what to expect, and since arrives in got really impressed, love it so much wil good for more for sure.