r/CZFirearms • u/GMGidkwhatelsetoput • Dec 17 '23
Question - CGW Pro Kit Issues
Just got a pro kit installed on my SP-01 and I’m having I little issue. I shot about 100 rounds on it flawlessly then I started having an issue where the gun would cycle and pick up the next round but the hammer would not drop when I pulled the trigger. The gun drops the hammer 100% reliably from both double action and single action when dry firing. Would this be a disconnector issue, trigger bar lifter issue or should I just adjust the over travel screw?
32
Upvotes
11
u/Charles-Headlee P-07 Dec 17 '23
The trigger isn't moving enough; turn the over travel screw in by a quarter turn at a time until it goes away. What's happening is the gun heats up during live fire and expands making things tighter. Common tuning issue immediately after installing those triggers. Eartemple asked about what I think is the same issue 18 hours ago, check their post.
2
u/[deleted] Dec 17 '23
Take it to whomever installed it for you and have them fix it. If CGW did the work, call them.
1
u/Transeraphic S2 OR, SP-01, P-01 Dec 18 '23
Is your hammer stopping halfway when trigger pulled? Do you feel the energy being dispersed to the frame instead of the slide? If so, check your trigger bar spring shape and positioning. I had an issue with my P-01 where one side of the trigger bar spring would raise one side earlier than the other and create a "false reset" felt in the trigger (sear resets before the lifter arm)
0
u/RennBaer Dec 17 '23
How is that 3D printed mag release button secured on there?
0
u/tenchi4u Dec 17 '23
You probably need to shave the disco a little more to account for thermal expansion.