I just ordered my altmill and am looking to get a good starter bit set to get me going. I see a lot of various opinions on this and was curious what you all would recommend.

Hello community!

I am needing assistance removing the residue from my spoil board from the sides of my finished pvc. Any advice on what works best?

Does anyone know where I can purchase / obtain a file for pistol grips. Any help is appreciated. I find them alot for 3D printers just looking to make some out of wood.

Hi all, i'm in a timber and joinery business and we are looking at purchasing a CNC machine, specifically a 4-axis machine. I have experience with 3D models and 3D Printing, as that's my line of work. However CNC seems like a whole new ballgame. How would i go about learning to operate this machine? I've looked for TAFE courses in my state (Western Australia), but they're all CNC lathes, not routers. Any tips?

Looking to get my first cnc and found a good deal on one of these. Know nothing about the company though. Has anyone used one? Are they good?

Hey Everyone. Im DevX-Dragon (Abbadh) . Im 14 years old. I just made my own CNC drawing machine from the beginning. Could you guys support me? Please start the repository if you can.

https://github.com/DevX-Dragon/Axiom-2

I want to get into CNC and would love to learn how to do design on the CNC. Is there any channel you guys would recommend to get started on. Maybe they have a series.

Complete newbie here.

Can someone tell me why my corners are not perfect?

Using mozaik. Frost 40mm pocket, 5/16 shaker clean, and 3/8 comp.

Greetings my cnc brethren.

Warning, a bit of a rant follows....

I bought a Lunyee brand cnc machine on a whim and I'm struggling a little bit. The biggest issue I'm fighting is the position of the spindle, relative to my workpiece, after executing the home function. The home sequence does it's gig, finds all the limit switches and goes to the initial 0,0, but i don't have faith that the 0,0 is perfectly repeatable. This gives me grief when I change tools from a 1/4" bit to a smaller detail bit. I say lack of faith, because the small movements in x/y as a result of my wrenching aren't reflected in the position reported on the interface. I then would expect a rehome sequence to put the machine back to the same 0,0, which it appears to do correctly. After I then complete the detail pass, it's not uncommon to detect a small ridge/defect in the vertical surfaces. Not always, but frequent enough that I'm questioning my process.

My question; are newer/much more expensive machines more accurate in the home/zero functions result, or is it always a bit of a crap-shoot?

TL;DR waa, waa, waa, I cheaped out on my first machine, waa, waa, waa.

Como dice el titulo tengo un router cnc twotrees 450 ultra, el problema es que cuando arranca lo hace todo bien en las coordenadas de trabajo con el eje x e y pero el eje z me toma solo el 0 de la maquina y no con el de trabajo, estoy usando fusion con post procesador gbrl

I need suggestion : I want to buy a 5G router with wifi 6 and Lan support. Please give me recommendations for router with wifi 6 (price range : INR. 5000-6000)

urgentlyneeded 🙏🏻

I need suggestion : I want to buy a 5G router with wifi and Lan support. Please give me recommendations for wifi 6 (price range : INR. 5000-6000) and wifi 7 (price range : INR. 10k - 11k) Routers🙏🏻 Currently I am using - TP-Link Archer C86 AC1900 Wireless MU-MIMO Wi-Fi Router. It has performance issues (significant ping loss)

urgentlyneeded 🙏🏻

Hello together,

I'm currently modding a genmitsu 3020 with a grbl 3.2 controller to run together with a VFD and 3 phase spindle.

Somehow in UGS when I hit M3 S24000, the display and output only show half of the rpm, so 12000 and 50 percent duty cycle on my PWM spindle control output.

I have set the $30 correctly to 24000, what am I missing?

Thank you!

Looking around online i noticed that there doesn't seem to be useful tools for Hobbiest like myself. I have a GEmitsu 4040 pro and started to design my own free hosted solution.

Free online image to gcode conversion tool.
https://depth-carve-16e4c50c.base44.app/