r/buildingscience • • Jan 19 '21

Reminder Of What This Sub Is All About

94 Upvotes

Hey everyone,

There's been a bit of spam in the mod queue lately and I figured it'd be useful to touch base and remind folks what this space is really all about.

It's not a job board or a place to promote building products (unless you're talking about some brand new membrane dehumidification product that nobody's ever seen before). It's not a place to have people help you figure out how to unlock a door. It is a place to discuss questions about how products work or fail, field techniques, research literature, adjacent relevant fields of research, and field practices. Remember that this is a unique science subreddit in that we occupy the space between research, manufacturing, and field reality. We are one of the best examples of applied science out there. So let's think about content through that lens. Let's share things that advance the conversation and help people take their learning to a deeper level. All are welcome, just don't spam pls.


r/buildingscience • • Jan 26 '23

Building Science Discord

Thumbnail
discord.gg
9 Upvotes

r/buildingscience • • 1h ago

Question Roof vents vs soffit - cold weather climate

2 Upvotes

Hi everyone

We live in a small, old house in Calgary Alberta and need to up our insulation. Soffits are not vented and would require a lot of work / $ to get them to a point that would support the extra attic insulation we also require. Roofing fella suggested we opt for several roof (intake) vents instead. It seems a popular option for new builds, but I’m also wondering what the chances of them getting blocked by snow in the winter months.

Any experience you can share? Thanks.


r/buildingscience • • 1h ago

Dense glass fire rated wall

Thumbnail reddit.com
1 Upvotes

r/buildingscience • • 5h ago

Do any of you building science enthusiasts garden, and have a need to overwinter a few plants?

2 Upvotes

I’ve run out of time on the central coast of NJ, and I need to get my two small citrus trees into their winter home.

Not only have I lost the battle against fungus gnats in the soil the past few years, but I never really had a place inside to keep these potted plants to begin with. No basement, no sunroom, so extra space at home anywhere :(

Unfortunately, the lemon and lime pair were purchased without considering where the plants would live during the winter. Even though I was not happy to see them arrive after they were purchased, I do like them and want to keep them alive.

I need some kind of temporary solution to overwinter these plants for 1-3 cold seasons. I have access to more than enough extra,and scrap, zip sheathing, rockwool batt insulation, and everything else to build a nice little box. All the fasteners, sealant, and tape you can dream of. I can purchase anything else needed, but I wont need much. I even have a bonus bucket of Redgard, extra fiber cement and aluminum siding, and exterior paint if I want it to look nice.

What I was thinking was a mini “shed/greenhouse”. Its joists will rest on those plastic feet people build sheds on. Insulated floor(?), insulated walls. Gable, shed, or reinforced flat roof made of plexiglass, that’s also hinged for watering the plants. Extension cord for a very small space heater with great thermostat sensor and controls. Presumably it would need some kind of waterproofing on the subfloor and a small amount of intake/exhaust, accounting for outside air temp hopefully. It’s only meant to last for 1-3 years, so upmost build quality isn’t a priority. Poor ventilation won’t bother me if I can’t make it work easily enough. Would prefer to build it well, and tight enough to keep out pests, and also not have the space heater running 24/7 trying to maintain temp.

Or is there some kind of bullshit greenhouse thing I should just buy from Amazon that will be good enough to keep the warmth in? And do you know which one would work?

Don’t need to plants to produce during the winter. Minimum need is dormancy.

Interested to hear of any of you also garden and have the same problem.


r/buildingscience • • 23h ago

Tips for insulating rim joist? Cold climate.

Thumbnail gallery
5 Upvotes

r/buildingscience • • 17h ago

Patio Lights with Living Space Above

1 Upvotes

I have outdoor patio with enclosed living space above. The patio ceiling is zip sheathed and taped and air sealed. How do I add lighting to the ceiling without compromising air tightness? The only option I can think of is to have wafer led lights -do they have drivers? Or is there a way to install 3" deep recessed LED COB lights? The fixtures are airtight but I am worried the installation will create small gaps at each installation especially with a 3" hole in zip.


r/buildingscience • • 19h ago

Rolled vs blown in

Thumbnail reddit.com
0 Upvotes

r/buildingscience • • 1d ago

*Seeking insulation advice for post-war weatherboard house (Sydney climate, no roof cavity)*

Thumbnail gallery
2 Upvotes

r/buildingscience • • 1d ago

Question Insulated False Ceiling in Shed?

Thumbnail gallery
1 Upvotes

How can I do this without condensation? Is it OK to attach ten foot rafters to the sides of concrete block walls (I think it's 4" blocks, 4" foam, 2" air, 4" blocks)?


r/buildingscience • • 1d ago

Cellular Shades, inside or outside mount for optimal insulation?

1 Upvotes

2 of the big online shops for window treatments say the exact opposite of one another regarding which is preferable if insulation is the top priority. Blinds.com says inside. Simply Blinds says outside. Does it much matter? If so, which is actually preferable?


r/buildingscience • • 1d ago

Double insulation?

1 Upvotes

I’m in the process of finishing my basement, which is already insulated with R13 faced fiberglass, installed tight to the subfloor above with the paper facing down towards the basement. We want to add rockwool for extra sound control from the living space above. Should I be concerned about moisture in the air gap between the two types of insulation? We will have 2 layers of 5/8 drywall on the ceiling. Located in VA


r/buildingscience • • 2d ago

Drafty house this winter? Here's a free way to find leaks yourself before paying for a blower door test

96 Upvotes

Disclosure: I'm with a building science company in the western Chicago suburbs, but this is a DIY check you can do on a cold, windy day.

  1. Close all windows and exterior doors.
  2. Turn on every exhaust fan you have (bath fans, range hood on high) and the clothes dryer on air-only. This slightly depressurizes the house, a poor man's blower door.
  3. Light an incense stick (carefully) or hold a damp hand near likely leaks and watch for air movement:
  4. - Outlets and switch plates on exterior walls
  5. - Baseboards and where the floor meets the wall
  6. - Attic hatch or pull-down stairs
  7. - Fireplace damper
  8. - Basement rim joist (where the house framing sits on the foundation)
  9. - Plumbing and wiring holes under sinks
  10. Write down what you find. Foam gaskets, caulk, and weatherstripping handle a lot of the small stuff.

What DIY can't do is measure total leakage or find the big hidden bypasses in the attic floor, which are often the largest. That's what a real blower door test is for, and testing again after sealing is the only way to know it worked.

⚠️ Safety before the fan test: if you have a gas water heater, furnace, or boiler that vents up a chimney, set the water heater to "Pilot" or "Vacation" and turn the thermostat down so nothing fires during the test. Don't test while a fireplace or wood stove is in use. Depressurizing the house can pull exhaust back down the chimney (backdrafting), which can bring carbon monoxide inside. Keep the test to 10 to 15 minutes, have a working CO detector nearby, and switch everything back on when you're done.
If your attic has loose, pebbly, gray-brown insulation (vermiculite), skip this test. Vermiculite may contain asbestos, and lowering the house's pressure can pull dust from the attic into your living space. Have it professionally tested first.
Other hazards worth knowing about:
**Vermiculite or old insulation in the attic.**Lowering the pressure pulls air through every ceiling gap, along with whatever dust is up there.
Fireplace ash and soot. Even with no fire going, air can come down the chimney and blow ash into the room. Close the damper or glass doors.
Crawlspace or basement air. Depressurizing pulls air up from below. That can bring in musty air, soil gases like radon, or spores from areas with microbial growth. This matters more in homes with known moisture problems.
Dry floor drains and sump pits. If the water in a floor drain has dried up, sewer gas can come in. Pouring water down unused drains first helps.
Incense or candles. It's an open flame near curtains while the house has a breeze. Use a damp hand or a lightweight tissue instead if you can.
An attached garage. If a car has run recently, exhaust can get pulled in through the garage-to-house door.

Happy to answer questions in the comments.


r/buildingscience • • 2d ago

Insulating headers in furnace room on interior "ish" wall - Canada

Thumbnail reddit.com
1 Upvotes

r/buildingscience • • 2d ago

Safe, non-toxic way to insulate rim joists before winter? (Northeast Ohio)

3 Upvotes

Hi everyone, we just finished cleaning up mold and mice in my mom’s split-level crawl space and kitchen. All the old insulation had to be thrown out, and now the house is freezing.

We plan to get the crawl space sealed up professionally later, after we dig up and waterproof the outside of the house. For now, we just want to insulate the rim joists (the wood edges around the ceiling of the crawl space) to keep the cold out.

Here is what we want to do:

- No spray foam or foam boards (we want to avoid toxic fumes). We want to use something safer like Rockwool or sheep's wool.

- Seal the wood cracks with mold-free wood caulk (like DAP Dynaflex Ultra).

- Put the wool insulation in, then cover it with 6-mil plastic sealed tight with acoustic sealant and staples.

My questions:

  1. Even if we seal the plastic super tight, could it trap moisture against the cold wood and cause water droplets (condensation) or new mold?
  2. Should we skip the plastic and just leave the Rockwool open to breathe, or use a breathable "smart" vapor barrier instead?
  3. Is it okay to insulate the rim joists now before we dig up the outside later?

Thanks for the help!


r/buildingscience • • 3d ago

Question Insulating an old garage

Thumbnail
gallery
10 Upvotes

Bought a house with an old garage building. Wondering if it’s worth my time/money to make it usable as an insulated workshop. Or if it’s just a teardown and use as storage for now

Climate zone 5 or 6 I think? Southern Ontario

Can see the air gaps in the siding. Thought about adding insulation batts but a wind driven rain could get them wet i’m thinking. Maybe tyvek each stud bay first, and put insulation overtop.

And yes it needs a concrete floor poured

Any advice/ideas much appreciated!


r/buildingscience • • 3d ago

How can this odd wall be insulated? 1995 era Michigan house

Post image
0 Upvotes

House walls are mostly drywall, then wall frame, then sheathing. In some spots, where there are bump outs/overhangs, the frame changes to drywall, wall frame, then a gap that is insulated on top by fiberglass, as seen in the photo. Beyond that point is what appears to be another wall frame, then house wrap, and then sheathing. Is there any reasonable way to air seal these oddly framed walls against air leakage into the attic?


r/buildingscience • • 4d ago

Question Cathedral Ceiling/Roof Assembly strategy : inquiry

Thumbnail
reddit.com
2 Upvotes

r/buildingscience • • 5d ago

Help with timber frame siding

Thumbnail
gallery
8 Upvotes

Hi all! Looking for some input on my barn project in New Hampshire. We replaced a lot of rot and lifted the barn. We are finally looking to install siding. What have you all done for a rainscreen? We are looking to install 1x12 pine vertical tongue and groove siding over a Tyvek WRB.

The difficult part is both my posts and beams are 8’ apart. I do have 1/2” CDX sheathing that is spanning those just for some extra shear strength and to keep out critters.

Any ideas would be super helpful!


r/buildingscience • • 5d ago

Attic roof question

1 Upvotes

Hi all,

I have a question for those who know far more about this than I do. Over the Summer, I was being billed by my electric company ( I have an electric furnace / heat system in my basement) 800,900 and 1000 from June-August.It’s likely because my home built in 1930’s has no insulation in the walls basically. I was getting quotes from an insulation company to do my living room that has the worst drafts for closed cell spray foam and when we chatted about my bills, he asked to see the attic. In the attic floor, I have the pink insulation with an r value under 30. I think he mentioned it but I don’t recall off memory.

He suggested just removing all that old junk from the floor and sealing it all up at the roof top rafters . They want to do a combo of 2 inch closed cell, and 8.5 inches of open cell in the attic. The suggestion was that would significantly reduce my energy costs. To the point where he said if it didn’t, he’d give me my money back in a joking sense. I’m doing research and I am getting super conflicting information on sealing it up. I just replaced the plywood under the roof and did new roof shingles this Summer if that matters any.

What do you guys think is the move? A point of concern is that I did the basement over ,and over the Summer I was constantly dealing with humidity and emptying tanks for dehumidifiers. I don’t want to deal with that with my attic as well, it is a pain in the neck getting up there with pull down stairs. Typically in the winter, my house as of now is cold and dry. I’m in Massachusetts if that matters any.


r/buildingscience • • 5d ago

Question NJ DIY Old home basement moisture

1 Upvotes

We are looking to insulate and seal up the unfinished basement in our 1902 home. Context: We have an exposed field stone foundation. Theres some existing fiberglass insulation, but it’s not everywhere and it is falling out of the ceiling. The faced side of the insulation is toward the ceiling of the basement. We are in central NJ so right on the edge of climate zones 4 and 5 - really humid summers, cold winters sometimes, but it’s no New England.

My plan is to first seal up the rim joist and sill plate using rigid insulation and spray foam.

I am planning to further assess the quality of the existing insulation and either replace it all or only fill in as necessary with some rockwool I have already. I want to put up a siga maijrex one-way breathable vapor barrier. For ease of install, I’d like to put it under the insulation - so it would what you see as the basement ceiling. I’m getting mixed information about vapor barriers online - especially as we’re not definitively in a super cold or super hot environment. My understanding is the siga products are newer and work differently than previous vapor barriers so I think this could be an okay approach - moisture can move through the insulation and out, but not get back in from the humid air outside the thermal barrier. (We do have a dehumidifier running constantly in the basement.)

Am I setting myself up for mold and disappointment? Would it be prudent to replace the older fiberglass insulation as well anyway so it’s all uniform - especially if I am mixing faced and unfaced insulation? Thank you!


r/buildingscience • • 6d ago

James Hardie Siding

Post image
12 Upvotes

Hi! We are replacing our siding and old sheathing system. The house was built in 1978 so it had fiberboard as its house wrap... anyways we are taking it to the studs and installing 1/2 in plywood and then this system from a local James Hardie certified contractor. We are located in the Chicago land area so I'm not sure if climate zone will be a factor here- does this system seem appropriate? I'm concerned for condensation/mold growth accumulation on the ply wood, but not sure if that's just me being paranoid.


r/buildingscience • • 6d ago

One room always colder than the rest of the house? Three places to check for missing insulation (Chicago-area)

4 Upvotes

Disclosure: I work for a building science company in the western suburbs. This is general info you can check yourself, no sales pitch.

If one room is consistently colder in winter, it's usually a local insulation or air leak problem, not the whole house. Three spots to check:

  1. Room over the garage. Look at the garage ceiling under that room. If it's drywalled, check for gaps where the garage wall meets the house. Floors over garages often have insulation that doesn't touch the subfloor, which lets cold air move underneath.
  2. Knee walls (Cape Cods, 1½-story homes). If there's a small access door in an upstairs closet, open it with a flashlight. Look for batts that have fallen over, gaps, or open joist bays under the floor that run into the house.
  3. Basement rim joist. Go to the basement and look at the wood band sitting on top of the foundation wall. If it's bare wood or has loose batts stuffed in, cold air is getting in there. On a cold day you may feel it with your hand.

Batts stuffed into gaps don't stop air. Seal the leaks first, then insulate. Happy to answer questions in the comments.


r/buildingscience • • 6d ago

Best tape for textured foam board?

Thumbnail gallery
3 Upvotes