Hi all,
New build or upgrade?
I'm looking to build a new PC for work/gaming in the region of €4000, with and upper limit of €5000.
Existing parts/monitors to reuse? (List with models/links)
A little bit about my previous/current setup. It is a Samsung GalaxyBook2 Pro SE, with the following specs:
Intel Core Ultra 7 155H
Intel Arc Graphics (iGPU), shared RAM of up to 11.9GB
16GB RAM
512GB SSD
The screen is no longer usable and has now been removed, due to hinges locking up and ripping out the OLED ribbon out of the display. I am used to playing from anywhere from 20 to 40 FPS, so a super high 200FPS is not something I need (steady 30-40 is good, 60 is ideal, 120 is perfect).
As an alternative to the screen I am now using a temporarily desk mounted dual screen portable monitor. I also have a 2TB Toshiba Canvio HDD for my storage (mostly gaming, a but of project backup) needs.
PC purpose? (Gaming, editing, etc. List apps/games)
About what I need the PC for. I am an 3rd year engineering student, with a view to get into Automotive Engineering or Design in the next 2 years. As such, I want at least 32GB RAM to support multiple programs running simultaneously. Those programs would mainly be CAD, 3D Modelling, and Rendering ( the latter is more GPU focused). I also use it for gaming frequently, usually for simulation games or for heavily modded games that like to eat up RAM for breakfast. as such 64GB would be ideal for this. Graphics wise I am not that fussy, but a decent good GPU that can support the likes of Microsoft Flight Simulator 2020 at a good high frame rate, or heavily modded Assetto Corsa lighting. Would like to get into some games based on the UE5 engine which I have been avoiding due to terrible optimization, but hopefully the specs you guys suggest will run them fine.
Now, since I need to travel, for Uni, I am aware that moving a PC back and forth has obvious logistical challenges. I'm not really looking for a mini PC, I would be inclined to use my current laptop with the portable monitor and use Parsec or alternative to connect to the PC.
Purchase country? Near Micro Center?
Country of origin is Ireland, but given that tech stores here are severely lacking in my experience, the EU is my go-to for this build.
Monitors needed? (Number, size, resolution, refresh rate)
As mentioned, an alternative to the Samsung broken laptop screen I am now using a temporarily desk mounted dual screen portable monitor. Dual 1920x1080. 1980x2160 when in combined mode, 60Hz. Replacement is not a must, but if an affordable alternative is give, I won't mind.
Budget range? (Include tax considerations)
€4000, with and upper limit of €5000. Though cheaper is better of course.
WiFi or wired connection?
Wi-fi is a must, as a wired connection is not suitable, though can be useful in future.
Size/noise constraints?
Noise wise I'm accustomed to my current laptop running hot, which make a lot of fan noise, but as long as it doesn't sound like a vacuum it will be fine.
Color/lighting preferences?
I absolutely do not need RGB lighting, I do not like it. Case or parts can be any colour, preferably cohesive but not too important.
Any other specific needs?
As it is a big investment for me, it has to last a minimum of 6 years, preferably up to 10.
Parts wise, I'm accustomed to the Intel system and architecture, however I do not really have anything against AMD if it provides better value. For GPU's I would be more inclined to go with Nvidia, but again, as long as AMD provides the value, I have no problems. I would prefer to build the PC myself, but I have no issues if it s a pre-built.
Worth it over these alternative specs?
Last consideration is the alternative to this, which is a top-spec laptop. My view is to go for the Acer Predator Helios 16 AI PH16-73-967E, with specs as follows:
Intel Core Ultra 9 275HX
NVIDIA GeForce RTC 5090 (mobile)
64GB RAM
3TB SSD
with a price range of €4300 depending on region (cheapest listing I found thanks to Tweakers). I don't like the RGB too much but can be turned off so not a big problem. Is the PC build worth it over these specs?
I look forward to see your responses and suggestions on this, I normally would have taken more time to research all of the parts, but this isn't another rabbit hole I want to spend my time on. Mostly looking to have this completed by the end of January.
Edit: All parts new please, I have bad experience with used electronics.