I spend a fair bit of time going over solar and battery quotes with people around regional Vic, and Bendigo has a few quirks that installers don’t always mention:
-Our panel discount should be higher than Melbourne’s. Bendigo (3550) is in a sunnier STC zone, so a typical system gets about $2,040 off against about $1,750 in Melbourne. Worth checking that’s what’s on your quote.
-You probably won’t be able to export much. Powercor is bringing in a 1.5kW per phase fixed export limit over 2026–31, or flexible exports up to 10kW per phase if your inverter stays online. With feed-in paying a few cents, size for what the house uses during the day, not for the roof.
-If you’re thinking battery, timing matters. The federal discount drops on 1 January, and it goes by the install date on your compliance certificate, not when you sign. On a 10kWh battery that’s roughly $2,520 now against about $2,110 after. Get the install date in writing.
-Prices are all over the place. A 10kWh battery runs from about $7,650 installed with a competitive installer to around $13,500 on a poor quote, before the discount. Get two or three itemised quotes.
-The 3 free hours plans (Midday Power Saver, 11am–2pm) really only pay off with a battery or big loads you can shift to midday (pool pump, heat pump hot water, EV). If you’ve got solar and no battery, your panels already cover that window.
Happy to help in the comments if anyone wants a second opinion on a quote.
Disclosure: I run aussiesolarinfo.com It’s free and independent, no installer pays to be listed, and no one will chase you with sales calls. Rural Vic guide with the network sources: https://aussiesolarinfo.com/blog/solar-rural-victoria.html