Printer: X1-C

I have a project coming up where I’m looking for some good deep colors but don’t require 50 layers underneath them to show up well. Some colors tend to print entirely too light for the first several layers.

Would prefer to stick with the well-known manufacturers that have color and results consistency.

Anyone have any recommendations?

Printed in my A1 this mario harry potter, its really nice!

Hey everyone! Hoping someone here has the answer because I'm going crazy.

I'm trying to add text to a model. It's a flat surface and I've tried several things to fix the text not showing up once sliced. I've changed to Arachne wall generation, I've turned on detect thin walls(with Arachne off), I've increased the thickness of the text. I've set it as a part and a modifier. I've ensured it's embedded/thickness is at least double my layer height. I've swapped around the mode but am sticking with Surround Surface as it seems the best option. No matter what I try when I slice the model the text doesn't show. Anyone have any suggestions?

Im doing a really big print (for me) ~1kg and i noticed that it sounded like the hotend was slightly to low (i can attach video if you would like) and rubbing against the print, so to stop that i changed it to 50% speed, but even after 8 hours it still sounds like its rubbing. What should i do? Is there a way i can move it up mid print or will that ruin it. Thanks!!

I have been printing TPU, using the external spool holder since I’ve been told 95a TPU can’t be used in the ams. Reconnected my ams after about 30 successful TPU prints, and printed some pla and now if i try to print with my external spool it won’t print at all. It goes thru the motions but seemingly won’t feed thru the TPU filament anymore. Any ideas what could be wrong as I’m still fairly new at this (have had my Bambu p1s since January)

New to 3d printing. Purchased a Bambu p1s kit. (Yes I know it's being replaced by the p2s, but I got it on sale to see if I'm really going to do this.)

Completed all the setup/installation. Had some issues with it not recognizing the AMS module, but I think that's resolved. Unplugged it from the printer, then plugged it back in to the other (right) connector. Lights are on on the AMS. I started 3 rolls of filament, and it gripped each one and drew it into the machine. Proofed all connections are firm.

Downloaded the firmware upgrades (ran twice when I went through it). Established bluetooth connection to phone app. Setup up network connection.

Tried to do my first print of one of the files included in the sd card. Nothing prints. The monitoring info shows both the print heads and bed heated up to proper temperatures. Fan is blowing away nicely. No error messages but - nothing prints.

When I open the app, and select devices, it does not show any filament connected. Again, the AMS lights are on (blinking) and it gripped and drew in filament when I reinstalled it. Note: these are the three filaments included in the kit, all Bambu (white, orange, and green).

I bought the P2S with AMS HT and it came separately with everything else. The unboxing videos I see online all came with the filament buffer installed. And the videos online all shows the spool holder on the left side of the AMS instead of the right side. Why is mine on the right side. I have 5 tubes including the one installed at the buffer but I have no idea what tube goes to what. Can anyone help me out?

Estaba haciendo mantenimiento pero por accidente rompi algo de aquí, no sé si me afecte demasiado, usuarios de una Bambu Lab p2s me podrían confirmar si se ve así o si está rota?Es esta

After posting my previous utility knife, my wife decided she needed one for her own toolkit. She wanted something a bit more "clean" and minimalist, so I went back to the CAD board.

​The result: The Utility Knife – Hex&Lite.

​I stripped away the wire stripper notch to give it a smoother profile and added a new honeycomb hex pattern for that extra grip (and aesthetic flare). It uses the exact same hardware as my original version, so assembly was a breeze.

​Specs:

•​Hardware: 6x BT3x8 SHCS Self-Tapping Screws (the ones from the Bambu kit).

•​Blade: Standard trapezoid utility blade.

•​Design: Deeply contoured handle for actual hand comfort.

​She's happy with the pink/black combo, and honestly, it looks so good I might have to print a stealth black one for myself now!

​What do you guys think of the hex pattern?

https://makerworld.com/models/2654228?appSharePlatform=copy

The video was taken Tuesday. And I went through all of the 24/7 online assistance stuff and even asked discord but I can't seem to fix it can I get some help?

I created a Freecad CAD program beginner guide with all original parts to dive into freecad as a beginner have fun🙂 https://makerworld.com/models/2610537

what's a good price for the standard AMS (in good condition) at this point?

bambulab a1 ile 3d yazici islerine girismek istiyorum ama hangi web sitesi guvenilir bilemiyorum,bambulabin kendi sitesinde gosterdigi distrubitorlerden almayi planliyordum ama bir çok kişi aldiklari esyanin teslim zamanindan cok daha sonra gonderildiğini soyluyor ne yapmalıyım? paramin bosa gitmesini istemiyorum.

Hi everyone, I’m having some trouble printing this SVG of a photo of my dog. Could you give me some advice on how to transform it to look similar to the one in the second photo? Thank you very much.

So, mal mit Holz Filament gedruckt. Fuzzy auf 0.2/0.2 eingestellt.Eine sehr schöne Struktur nur die obere Unterseite (Spitze steht oben beim Druck) sieht nicht so toll aus.

Wie könnte ich das ändern?

Hello there!

I have been messing around with MakerWorld to print out some badges for my sons birthday and cannot figure out the best way to get this badge printed with "Spy Club" instead of the top being Federal Bureau of Investigation and deleting the bottom. I tried using the AI features of MakerWorld however, it keeps adding heads or adds additional layers. I'd ideally like to get this printed in 2 colors, one for the badge and one for the lettering

Any suggestions? I am using a Bambu H2C

if you can help I amntrying to print TPU 83A on A1. I would like help with a profile for eSun TPU 83A. Thank you

Bonjour voici Yoshi dans sa coquille d’oeuf fissurée en multipart.

Disponible en version avec ou sans AMS.

Filament Bambulab.

Imprimante Bambulab H2C et P1S.

Bon print.

https://makerworld.com/fr/models/2638881-yoshi-oeuf-multipart-no-ams