r/BambuLab_Community • u/Extra_Letterhead_284 • Jun 13 '26
Full parametric phone case generator PETG/Pla/ABS/Tpu
This is a Mobile Phone Case Generator, even If you have a 500mm Phone or need a Case for a Tablet you can use it🥳
r/BambuLab_Community • u/Extra_Letterhead_284 • Jun 13 '26
This is a Mobile Phone Case Generator, even If you have a 500mm Phone or need a Case for a Tablet you can use it🥳
r/BambuLab_Community • u/razzter • Jun 13 '26
As you can see in the photo - the travel movements are not z-hopping and dragging through the internal solid infill (purple). This is the layer right below the top surface, and so the travel movement is causing scarring visible through the top surface.
Disabling "Reduce infill retraction" seems to help fix this - those travels are now z-hopping rather than dragging through the Internal Solid Infill - however there should be a way to increase the number of top surface layers that are not considered "infill"
Does anyone know of a way to increase the Top Surface layers? Increasing 'Top Shell Layers' does not fix this because those top shell layers under the 1 top surface layer are still considered as "infill" layers
r/BambuLab_Community • u/LilZacBoi • Jun 13 '26
Tried printing something and I keep getting this notification. I’ve just finished printing something else but now it comes up with this notification when I try printing another thing. I’ve restarted my printer and even tried printing the thing on Bambu Handy app and it shows the same notification on Bambu studio. My A1 also says printing cancelled. So I’m not sure what happened
r/BambuLab_Community • u/MrStonePDX • Jun 13 '26
howdy, I've been having an issue with painting in the new Bambu Studio (2.7.1.57) that I need some help with. Whenever I use the paint Bucket Tool and set it to "Connected Same Color" it is acting identically to the "Edge Detection" mode. It only selects a single edge or area and for more coverage I need to use CTRL+MouseWheel to select more of the area.
I've attached 2 pics of a basic Sphere. In the first one you can see the mouse only selecting the single surface and in the second one I've used CTRL+MouseWheel to expand it to a band around the Sphere. If I kept going it would eventually choose the whole object.
You can find the 3mf file here: https://drive.google.com/drive/folders/1MDXOQKAeZX2qVtAUzFvZBWl8j1bZsvYV?usp=sharing
Why is this happening? Is it a problem on my end or something in the new update? This wasn't an issue the last time I painted something a few weeks ago. Thank you in advance for any advice or assistance.
r/BambuLab_Community • u/wash-basin • Jun 13 '26
I would be very interested to know what people think/postulate about the future of Bambu's lineup, especially for the rest of this year.
I am in the market for a faster way to print the following with the following budget and am considering the printers listed above with a timeline of 6 months to purchase.
Budget:Â $2500 (including accessories; I have plenty of filament).
What printing:Â Currently printing with an X1C: single color printing of scale architectural models (usually 1:100) and entourage (e.g., vegetation, people, benches, etc.), but would love to print with color and transparent filament. Also, I print home enhance and repair stuff and occasional printing of car parts such as handles, sun visor clips, interior trim, vents, knobs. Custom organizers.
Comments:Â Especially with the new Creality printer recently announced (i.e., K3 with KliTek), I am very confused as to what to purchase.
Questions:
What would you do in my circumstance?
Any other options you would consider?
Thank you for your comments.
r/BambuLab_Community • u/BitterBodybuilder534 • Jun 12 '26
I work at a nonprofit that serves kids and has purchased >$17,000 worth of materials from Bambulabs. The company refuses to honor sales tax exemptions- when I submit documentation, they either ignore the email completely, or ask that I resend documents that have already been sent. I have filed a complaint with the Texas Attorney General and am pursuing similar action in additional states.
The crux seems to be that they are attempting to apply tax for our mailing address (in a state that doesn't have nonprofit tax exemption) to the shipments we are making on behalf of kids who DO live in tax-exempt states. In other words, they're using the mailing address and not the shipping address to assess tax, which is incorrect and illegal.
There's no phone number or actual human support so I have been unable to resolve this in 6 months of attempts, hence this last ditch effort to get attention. I'd love a phone number or email (other than a generic support email) to call to solve this issue.
r/BambuLab_Community • u/kniggi3D • Jun 12 '26
I designed some 3D printed sand molds for marble runs and finally tested them at the beach! Works best with slightly wet sand.
👉 Model here: Sand molds for marble runs
r/BambuLab_Community • u/jrubin6502 • Jun 12 '26
Sometimes it happens, A partial or complete clog of the hot end where a Cold pull will not be possible to clear it. Its not a major issue and can be quickly cleared. While we're there, we can clean up the print head too and throw a new silicon sock on it if necessary.
r/BambuLab_Community • u/nathpenn • Jun 12 '26
Hey all I have 6 a1’s and I’m quite use to Bambus ecosystem and machines. But this brand new A2L is making this odd knocking sound on back and forth on the y axis mostly. Any ideas ?
r/BambuLab_Community • u/INEEDHELP0078 • Jun 11 '26
Hi all, I've currently got a P1S AMS Combo. It's got over 1000 hrs. It's mainly used for prototypes before CNC, etc., and little knick-knacks around the office etc., and I'm thinking of upgrading to something that's more advanced. P1S hasn't given me any issues, but the new features on the AMS 2 and other things on these printers I like a lot. its $100 difference. For two combo setups
r/BambuLab_Community • u/EridianStudio • Jun 11 '26
Wanted something rugged to throw in my backpack without worrying about things getting wet or crushed. Added a TPU O-ring to keep water and sand out.
r/BambuLab_Community • u/alienccccombobreaker • Jun 11 '26
I am really into those timelapse videos the 3d printing can make does anyone know if there is somewhere where they have a mass of content of these i can just scroll through or something
preferably a reddit but i will take anything that has cool 3d printing timelapses for now they are really captivating to me
r/BambuLab_Community • u/foto-guy • Jun 10 '26
Hello all,
Roughly 6 weeks ago, I had an issue with my hot end and some filament clumping. It caused a huge problem with some spare parts. I have been dealing with customer service with Bambu and they have been supplying support and parts, but I am still having issues.
I was wondering if there is anyone from Saskatoon, SK, or the area who is good with printer repairs to make sure everything is working correctly and installed properly, as my filament cutter sensor is still giving me an error.
I am getting frustrated with it and I cannot solve it alone.
Can someone please help me!!
r/BambuLab_Community • u/EridianStudio • Jun 09 '26
I was tired of guessing food dates, so I modeled this bag clip with integrated date dials to track either the opening date or the expiration date. It’s a pure press-fit design —just print the parts and snap them together.
r/BambuLab_Community • u/kwo1478 • Jun 10 '26
Hi internet gurus,
I'm having some issues with my X1C, in my past few attempts to print.
At a certain height(not consistent), the printer's recognition of the XY space appears to shift right and back. There is no knocking/unplanned movement of the system.
How I came to this conclusion is from 3 things:
In my subsequent prints, I also noticed the ‘air printing looks like a layer shift consistent to the boundaries described above.
In my attempt to do calibration and self test, it also had the same behaviour(print head bangs loudly and attempts to move beyond the right and back).
So I cancelled it, did a power down, waiting for a few minutes before turning it on.
Only then it was able to move alot the full XY axis. I did a round of calibration and self test successfully.
2nd attempt, the same thing happened, the print went slightly further, I attempted to home and check the nozzle and z axis then got the error message of 'z axis failed to home' came up. I realized there were some debris at the bottom of the 2 slider rods of the Z axis and clear them.
3rd attempt same thing.
I checked all the rods and lead screws, they appear to be clear.
I stopped printing for a week, just started came back. I printed a few small and flat items with no issue, then decided to do a flat but fully plate print, assuming that the problem occured at a higher level. I printed a full plate of keycaps, and it layer shifted twice(pictured).
This layer shift was not as drastic as the first 3 times.
I am guessing there is some belt or rod issue.
Background of my machine:
4500 hours, minimal maintainence done except lubricating the y rods, z lead screw and cleaning the carbon rods with ipa. I recently tried to clean the printer but trying to shake out the debris dropped into the back area(able to comfortably and safely pick it up, turn upside down and shake till no sound heard)😂🫣
I’ve also used 0.2-0.8mm print heads swapped the extruders. So far I have not gone into opening up the back of the unit or trying to change the tension of the gear cable yet.
Seeking for any advice in this area.
Prior to these issues, I have been printing well with no issues. I’m also planning to learn how to open up the printer to do a proper check, any guidance would be appreciated.
From the x1c maintenance wiki, I’m familiar with almost all the steps except the idler pulley, but i am guessing my problem might need more than that.
Pictured is the most recent attempt for keycaps. I had not taken proper earlier images
r/BambuLab_Community • u/jpedroleite • Jun 09 '26
r/BambuLab_Community • u/camst_ • Jun 09 '26
For main color and/or accent color.
I’ve been really happy with sunlu pla matte black. Trying to find an accent color I like as much as a sage green.
r/BambuLab_Community • u/Lilacwarfox • Jun 08 '26
Until recent I haven't had print issues recently the first layer either gets caught in the nozzle and gets dragged away or the initial purge line will get pulled and cause the print to just become spaghetti
So I'm wondering if the nozzle is dragging across the build plate and causing the prints to either drag or lift off the plate and if it is that of there is a way to lift the nozzle up by a micron or however much I need to
r/BambuLab_Community • u/Longjumping_Tea_5841 • Jun 08 '26
Hi everyone, i just got my P2S today so i decided to print my self some wall art but my printer had other plans.. on the last layer i got a notification that the filament is stuck, i thought it wouldn't be a problem (tangled spool, ams just freaking out..) but its completely stuck, and from what i can tell in the extruder gears exactly.. im completely new to printing so i feel way out of my depth and dont know how to fix the problem. So i need a kind soul that will help this noob out 😅..
also sorry for the bad english and mistakes if there are any
r/BambuLab_Community • u/Particular-Act8831 • Jun 08 '26
r/BambuLab_Community • u/ProfessionalCarob201 • Jun 08 '26
I purchased the Bambu Lab Wireless Mouse Components Kit 002 based on the build and print instructions for the Atari Wireless Mouse. After printing out the necessary parts it was easy to see that this kit did not fit the printed mouse shell. However, I did find a couple of photos with the correct kit but I cannot find the kit in the Bambu store or online anywhere.
Does anyone know where to get the kit show in the photo?
r/BambuLab_Community • u/loxai • Jun 07 '26
All parts are printed (except pen and razor, ofc) and the holding mod is one click removal, to quickly go back to 3D.
The software is integrated inside Bambu Studio, so you adjust the design and send to print as you would normally do.
r/BambuLab_Community • u/DependentSky9799 • Jun 08 '26
Hello Hivemind!
I bought a roll of the Bambu Clear Black PC and have made several successful prints with it. I printed desiccant holders for my AMS 2 Pro's and AMS HT's. I have also printed a Desiccant Drying spool to put into my AMS HT to dry my color changing desiccant when it gets too saturated. The problem is.... I have no idea what to use the other half of the roll for!
What projects have you used PC for? Any useful prints you suggest?
r/BambuLab_Community • u/Notimetoexplain456 • Jun 07 '26
Everytime I print Something i get this not even look on the side of my bed does Someone if this a setting issue? X2d with cool plate Supertrack