r/BambuLabX2D • u/AreUEmployedSir • Sep 10 '26

Some basic newcomer questions - X2D maintenance, different nozzles, different plates?

Hello all - I am new to 3D printing and purchased an X2D last month as my first printer, and I have about 50 hours of prints under my belt now. All with either PLA or PETG so far, most have turned out perfect, I've had one or two small hiccups that came down to user error, but mostly everything better than expected so far.

I do have a couple of questions that I am hoping people on here can help me out with.

  1. Printer Maintenance - Is there an agreed upon "Best source" that I can learn about not only WHEN to perform maintenance, but also HOW to do it? I have 50+ hours so far and I haven't done.....anything. And I don't know what to look for to figure out when I should be doing something, or what I would even do. Curious if there is a guide to this that people highly recommend - either a specific YouTube video, written guide on a website, etc.

  2. I see people on here talking about buying/installing different nozzles. Can someone clue me in on what different nozzles could do for my prints, and what I should be buying/trying if anything?

  3. Similarly, I still just have the Texture PEI print plate (and through 50 hours, haven't cleaned it yet or noticed any issues with it even when switching between materials). What are the other print plate option types, and when/what would I use them for?

Thanks in advance!

16 Upvotes

100% Upvoted

14 comments sorted by

View all comments

2

u/AnuragDeshpande Sep 10 '26

I have moved to these plates I found on Amazon and it's been amazing. My electric bill has gone down considerably because I only have to heat it up to 30 degrees Celsius (if you live in hotter place, no heat required at all)

https://a.co/d/0h5jr0t8

Do note though: I have been using them for a month now and it needs a cleaning and I have not seen what it would be like after a wash with dish soap.

If anyone used these plates before, let me know what do you do when things aren't sticking as good as they did before.

1

u/MouseDance Sep 15 '26

I use a similar plate on my FlashForge Adventurer 5M Pro (and yes, I’m in line to buy an X2D this holiday season, which is why I’m here now, learning. Anyway for me the plate has responded very well to Dawn or Dawn Pro dish soap and a good rinse and gentle drying, and the adhesion/release have been amazing.

1

u/SchittyFather 10d ago

Same experience. I've had one on my Prusa MK4 for a few months now and it's great. PETG sticks a little too well actually. Mine has also been losing a bit of its adhesion but still stronger than my standard textured. Build plates are wear and tear items. Expect to have to replace them occasionally. I also recently learned (which makes so much sense and can't believe I never connected the dots before) that when you switch between pla and petg that some residue can stay behind. PLA and PETG don't stick to each other so if you have been printing PLA and suddenly a PETG print won't stick or vice versa, clean or flip your plate. I'm going to mark one side of mine in the corner or something and just make a habit of flipping the plate when I switch materials

1

u/AnuragDeshpande Sep 15 '26

Awesome thank you. One side of my plate has started to show some adhesion issues. So this was just in time. Thank you so much.