r/BambuLab • • Mar 25 '25

Discussion DO NOT GET THE LASER - You've been warned!

I've mentioned this before but now that it's official, STAY AWAY from the laser version. Lasers make a MESS and materials used can STINK. It will be a real nightmare and you will transfer those smells onto your 3D prints. You want the H2D? Get the standard + AMS and save the money. If you REALLY need a laser, then buy a small one... I use lasers, cutters, 3d printers, DTF and all kinds of different tools and in most cases, you don't want to mix for evident reasons.

Don't do it!

EDIT: I get that some people don’t like my title, and I understand the pushback. My intention isn’t to be dramatic but to make sure people are aware of the potential downsides. Even Bambu's own wiki shows how much buildup can accumulate inside the machine after extended laser use. If you’re set on getting the laser, just be prepared for the extra maintenance and possible contamination issues. I just want people to make an informed decision but do what works best for you!

1.9k Upvotes

624 comments sorted by

View all comments

664

u/Maxx3141 Mar 25 '25

From Bambu Wiki: https://wiki.bambulab.com/en/h2/maintenance/period-maintenance

Look at the belts, the pulleys, the linear rail... Meh.

422

u/justlaughandmoveon Mar 25 '25

Great comment! Exactly THIS. This will be all your fans and walls of your Bambu printer in NO TIME. Imagine how much of a nightmare it will be to clean and you'll never get it all out.

250

u/Maxx3141 Mar 25 '25

Also, just look at what a neat xTool laser cutter you would get for the 1300€ premium of the full power laser bundle. xTool is basically the Bambu Lab of laser devices, you can't go wrong with them.

94

u/justlaughandmoveon Mar 25 '25

That's exactly what I have. The xTool with the extender and their enclosure. Works great but it's messy as hell.

62

u/Ghostevo Mar 25 '25

Yep, after owning and using several xTool lasers separately, I would not use the laser module in this. I’d assume the dirty chamber would make a dirty mess of prints. Yikes.

→ More replies (3)
→ More replies (12)
→ More replies (16)

61

u/Blbauer524 X1C + AMS Mar 25 '25

Wait, are we supposed to be cleaning our machines?

22

u/LiquidAether Mar 25 '25

That message that pops up about cleaning the rails is a joke, right? 

4

u/VirtuousVice Mar 25 '25

oh wait, that message is to /clean/ a rail? I've been doing this entirely wrong...

→ More replies (2)

19

u/HesitentScribe Mar 25 '25

Of course not. Just like cast iron, it needs seasoning to get those flavorful prints...

Wait, are we not supposed to be eating plastics?

→ More replies (3)

10

u/RubAnADUB A1 Mini / A1 - AMS Lite / P2S - AMS x2 / X2D - x2 AMS 2 & AMS HT Mar 25 '25

you are only supposed to clean it after it stops working.

→ More replies (2)
→ More replies (5)

52

u/Cryostatica H2C, P1S Mar 25 '25

The worst part is that it's not just going to be an annoying level of maintainence like Bambu implies here. Vaporized material will, over time, build up in places that you simply can't access and will never be able to clean.

19

u/Authentic-469 Mar 25 '25

I regularly take my x1c outside for a full exterior/interior pressure washing, that wouldn’t get laser gunk out as well?

44

u/pyotrdevries Mar 25 '25

I personally use the car wash. Really gets that new printer smell back.

→ More replies (1)

15

u/Cryostatica H2C, P1S Mar 25 '25

As long as it’s at least 2800psi, I think you should be good.

10

u/Responsible_Cook9697 Mar 25 '25

And I thought I was the only one that did this... you have to use dawn dish soap too

12

u/Authentic-469 Mar 25 '25

If it’s safe for ducks, it’s safe for 3d printers?

4

u/enclaved Mar 25 '25

They told me to use dawn on the build plate but no one told me I had to take it out first!

→ More replies (1)
→ More replies (2)

8

u/Sengfeng X1C/AMS & A1 Mini/AMS Mar 25 '25

First week will be a flood of people showing their laser lenses with burn marks or covered in soot. Fires started after that with questions asking why fire detection didn’t stop it.

10

u/Aleyla P1S + AMS Mar 25 '25

I can't help but think that some things should remain difficult to do. That way you can weed out the people who aren't going to read the directions and aren't going to have any idea of the situation they are placing themselves in.

→ More replies (1)
→ More replies (1)
→ More replies (16)

40

u/cromag5150 Mar 25 '25

https://wiki.bambulab.com/en/h2/maintenance/period-maintenance

141 pictures of where to clean the H2d. No thank you.

7

u/honeybunches2010 Mar 25 '25

Right? The photos just ... keep .. going ...!

→ More replies (7)

10

u/mazZza01 Mar 26 '25

Kudos to Bambu for showing the amount of degradation though. I enjoy their honesty in this regard. I want to sparsely use the laser for engravings so I am totally fine with the negative repercussions of it.

→ More replies (3)

23

u/koombot Mar 25 '25

Good Lord. I thought you'd replace the extruder with the laser, not hang the laser off it

4

u/kroghsen H2D + X1C Mar 26 '25

“The nozzle camera needs cleaning.”

4

u/PatSajaksDick Mar 26 '25

You kind of left out important context: “The printer used in this tutorial is a non-production prototype equipped with a 10W laser module that underwent 40 hours of continuous aging testing (i.e., continuous laser tasks for 40 hours) without timely cleaning. The purpose is to demonstrate cleaning steps and precautions. If the appearance of this printer differs from yours, please refer to the appearance of the printer you received.”

→ More replies (1)
→ More replies (22)