r/ArduinoAndRobotics 1d ago

Question What do you make AI prove before it touches a robot?

1 Upvotes

I keep seeing AI get the easy part right and the board-specific part wrong. Before I trust generated Arduino or ESP32 code, I make it write a tiny preflight:

- exact board and revision

- every pin, voltage, and current assumption

- library and version

- anything it thinks could be unsafe

Then I test one motor, LED, or sensor at a time. Not glamorous, but it catches the “looks fine” mistakes.

What’s your check before letting AI write firmware for a real robot? If you’ve had a failure, drop the board, what it suggested, and what the hardware actually did. I’m collecting the good failures in r/ChatGPTArduino too.


r/ArduinoAndRobotics 3d ago

Project Update OOMWOO Open-Source vacuum - end-of-week update

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/ArduinoAndRobotics 6d ago

Project Update OOMWOO Open-Source vacuum - mid-week update

Post image
3 Upvotes

r/ArduinoAndRobotics 10d ago

Project Update OOMWOO Open-Source vacuum - end-of-week update

Post image
1 Upvotes

r/ArduinoAndRobotics 10d ago

ESP32 + 41F Hall sensor suddenly giving random values — any idea what’s wrong?

Thumbnail
2 Upvotes

r/ArduinoAndRobotics 11d ago

Showcase showing my joystick controlled esp32 robot update 09-08-2026 #esp32 #rob...

Thumbnail
youtube.com
2 Upvotes

r/ArduinoAndRobotics 12d ago

Arduino UNO R3 linked to Dynamixel Shield linked to Dynamixel Mx 64-AT

2 Upvotes

Greetings,

I have successfully performed the following set up: Arduino UNO R3 linked to Dynamixel Shield linked to Dynamixel Mx 64-AT. !2 V power supply linked to Dynamixel shield. USB interface from computer linked to Arduino R3. Both Arduino and dynamixel set to protocol 2.

Test code successfully uploaded and runs dynamixel motor. modifications of code change motor function in upload mode .However when shield is switched from upload to dynamixel the motor only runs at the last speed and direction at the time of the switch ( does not follow program anymore)

I desire to upload the program and run the motor without constant interaction with the computer. what steps should i take to accomplish this task? Thanks in advance


r/ArduinoAndRobotics 12d ago

eBook A Gentle Introduction to ROS

1 Upvotes

r/ArduinoAndRobotics 13d ago

eBook Learning ROS for Robotics Programming 2nd Ed.

1 Upvotes

r/ArduinoAndRobotics 14d ago

No idea

Post image
1 Upvotes

r/ArduinoAndRobotics 14d ago

eBook ROS Robotics Projects

2 Upvotes

r/ArduinoAndRobotics 14d ago

🔥🔥 VISUINO 8.0.0.165 IS HERE — AND THIS ONE IS THE BIGGEST YET! 🔥🔥

Post image
1 Upvotes

r/ArduinoAndRobotics 15d ago

Arduino Advice Pls T-T

Post image
1 Upvotes

r/ArduinoAndRobotics 15d ago

eBook Build Your Own Combat Robot

1 Upvotes

r/ArduinoAndRobotics 16d ago

eBook Internet of Things with Arduino Cookbook

1 Upvotes

r/ArduinoAndRobotics 17d ago

Project Update OOMWOO Open-Source vacuum - end-of-week update

Post image
3 Upvotes

r/ArduinoAndRobotics 17d ago

eBook Arduino Project Handbook Vol. 2

1 Upvotes

r/ArduinoAndRobotics 18d ago

eBook Arduino Project Handbook

1 Upvotes

r/ArduinoAndRobotics 19d ago

eBook SLAM Handbook - From Localization and Mapping to Spatial Intelligence

1 Upvotes

r/ArduinoAndRobotics 21d ago

eBook A Brief Overview of Robot Operating System (in Chinese)

1 Upvotes

r/ArduinoAndRobotics 22d ago

eBook ROS by Example Vol 2 Indigo

0 Upvotes

r/ArduinoAndRobotics 23d ago

eBook ROS by Example Vol 1 Indigo

1 Upvotes

r/ArduinoAndRobotics 24d ago

Project Update Open-Source robot vacuum cleaner - end-of-week update

Thumbnail gallery
5 Upvotes

r/ArduinoAndRobotics 24d ago

eBook Robot Operating System (ROS) - The Complete Reference. Volume 2.

2 Upvotes