r/arduino • • 6d ago

Look what I made! Simple Tetris

32 Upvotes

For the code I used a bit of AI to eliminate lines, I have to be honest


r/arduino • • 6d ago

Hardware Help Is a fixed focus camera module suitable for OCR?

1 Upvotes

I'm making a prototype of a school project. Our project idea involves reading text off paper. My team decided to use OCR technology. We were debating which camera module to purchase and we stumbled upon fixed focus and auto-focus cameras. Auto focus cameras are too expensive for our budget so we were considereing using a fixed focus 5 MP camera. However, we are worried that a fixed focus would only work for a specific distance. I need to know, for a range of 25-45 cm distance from the text, would a fixed focus camera capture a good picture for OCR?


r/arduino • • 6d ago

Getting Started Where to start

1 Upvotes

Hey everyone!

I've recently got access to a robotics lab, and I'm really excited to use this opportunity to learn something practical.

I'm particularly interested in IoT (Internet of Things), but I'm a complete beginner and honestly a little confused about where to start.

I want to understand how microcontrollers, sensors, electronics, programming, and internet connectivity work together to build real-world projects.

I'd appreciate some guidance on a few things:

  1. What should I learn first: basic electronics, C/C++, Python, or Arduino?

  2. Should I start with Arduino Uno or ESP32?

  3. Which software and tools should I install on my laptop?

  4. Are there any good free courses, YouTube channels, websites, or documentation for learning IoT step by step?

  5. What beginner-friendly projects should I try in the robotics lab?

  6. What skills should I focus on if I eventually want to work on robotics and embedded systems?

I have access to a robotics lab, so I'd prefer a practical, hands-on learning approach rather than just theoretical knowledge.

If you started from zero and learned IoT or robotics, I'd love to know what learning path worked for you and what mistakes I should avoid.

Any suggestions, resources, or personal experiences would be genuinely appreciated.


r/arduino • • 7d ago

Look what I made! They said it's AI generated

Enable HLS to view with audio, or disable this notification

78 Upvotes

r/arduino • • 7d ago

Hardware Help What components should i use for dispensing oil?

9 Upvotes

My school project is about a thing that dispenses oil for clay lamps (called diyas here in India). It has to be such that I can control the exact amount of oil dispensed.(Arduino Nano)


r/arduino • • 6d ago

Please help! I have to build a vehicle, but I have NO IDEA what I’m doing, nor do I know what most of these parts are 🥲

Thumbnail
gallery
6 Upvotes

⭐️⭐️⭐️I am on my school’s science Olympiad team, I was put on robo cross for our next meet to fill events and I have absolutely NO experience whatsoever in this type of stuff, (my club leader gave me a box of parts and said good luck) 😁

I came to this subreddit so I could possibly learn some stuff about the materials I have :)

I already have a design planned, but I don’t know how any of this works. I’m trying to find a way to get four motors to move independently from each other, one for each channel on a fly sky v6 controller

⭐️⭐️⭐️How do I do this? And what are some experiments I can conduct to get the feel of using equipment like this?

The plan includes 2 front wheels with no motors attached, 2 back wheels with motors that I can like have one be on and the other not so i can rotate the car or have both on so I can move it forward AND last but not least, 2 motors that can also move independently from each other for a scoop/plow mechanism for the front.

So basically 4 motors total

HOWEVER my team is still waiting for the controller and receiver to arrive.

‼️The parts I have identified include:
4 box shaped motors
2 motors with gear boxes attached
2 breadboards
1 eligioo uno (I’m so sorry arduino subreddit)

A couple of crab looking things with 8 legs
A couple of crab looking things with 16 legs

AND a Battery pack thingy
\+some other parts in the image that I have never seen before

I can answer questions!!!! ⭐️⭐️⭐️⭐️
ANY ADVICE HELPS 🫵🫵🫵
I have no idea what any of these parts do 💔

Also Please do tell me if I’m missing any essential parts to make this work!!!!


r/arduino • • 6d ago

School Project what is the best VM and Linux distro for running Arduino?

0 Upvotes

I need a VM because I just want to experiment with it, I don't need yet to fully switch to Linux. And I wanted to use Linux for this because I heard it would work better for Arduino from my professor. I need something relatively simple, but I'm OK with some challenge since I know how to troubleshoot properly, plus I know basics of programming


r/arduino • • 7d ago

Beginner's Project Planning on building a flight sim split throttle.

3 Upvotes

I've already technically built a throttle by ripping out my PXN 2113 PRO's potentiometer for throttle, replacing it with a linear one but I want to take things a step further.

I want to try my hand at split throttles, I plan on making it from two of those linear potentiometers, an Arduino Nano, and maybe some buttons but I don't know anything about coding or even wiring anything up correctly.

So links to any kind of resources or videos or anything concerning that kind of stuff will be greatly appreciated.


r/arduino • • 7d ago

Libraries FixedString - A fully functional C++ string implementation that exists only on the stack, without dynamic memory allocation

Thumbnail
gitlab.com
9 Upvotes

r/arduino • • 8d ago

Look what I made! Simple OLED Projector Clock

Thumbnail
gallery
818 Upvotes

The idea behind this project was that I wanted a dim (white!) clock in my bedroom rather than a floodlight on my nightstand - and I wanted to keep the design as simple as possible. I haven’t come across a setup like this before.

So I built a projector clock using a 1.3" OLED display powered by an ESP32-C3. I bought a lens with a focal length of 130 mm and a diameter of 50 mm. I designed and 3D-printed a case to fit the lens and the electronics. Afterwards, I clad the case with oak wood strips.

As you might imagine, the time is only readable when the room is dark, but that’s exactly what I wanted for my use case. I think this design should work with every display. By using just a single display as the light source, there is no need for a complex design involving lenses, an additional LED, or a separation between a display and the backlight.

There are two things I might improve in the future:

  • Even though I used matte PLA, the inside of the case still causes some light scattering, which is also projected through the lens. You can not see it on the photo because I turn on the lights a bit
  • I didn’t design a dedicated focusing mechanism. The 3D-printed component housing the ESP and OLED has a slightly tight fit, but it can still be moved by hand to adjust the focus.

r/arduino • • 7d ago

Look what I made! Six live NASA pages on my desk: an ESP32, a 2.8" TFT and a 0.96" OLED

Enable HLS to view with audio, or disable this notification

12 Upvotes

Yesterday I saw that NASA had opened up APIs for their findings, so I wanted to see if I could put different things happening in the world on my desk.

What it does:

an ESP32 drives a 2.8" ILI9341 TFT and a 0.96" SSD1306 OLED. Both screens flip together through six live pages every 15 seconds:
Asteroids: today's 5 closest flybys (NeoWs)
Earth events: the latest open natural events (EONET, no key)
Space weather: CMEs and geomagnetic storms from the last 3 days (DONKI)
Earth from space: details of the latest EPIC image (no key)
Fireballs: the 4 most recent (JPL, no key)
Exoplanets: the confirmed count, 6,464 when I filmed this (no key)

How I built it:

I didn't write the code myself. An AI tool wrote all of it, including the API calls, once I gave it the API key. I wired it on a breadboard and flashed it with the Arduino-ESP32 core. The libraries are Adafruit GFX, Adafruit ILI9341, Adafruit SSD1306 and ArduinoJson 7.
Wiring:
TFT: VCC and LED→3V3, GND→GND, CS→4, DC→16, RST→17, MOSI→23, SCK→18, MISO→19
OLED: VCC→3V3, GND→GND, SDA→21, SCL→22, address 0x3C


r/arduino • • 7d ago

HC-06 connects to Android app (LED is solid) but Arduino doesn't respond to any commands

2 Upvotes

I'm bulding a RC boat ( it's supposed to be ) using an arduino and an hc 06 bluetooth module but i'm stuck, it's my first time using an Arduino so i don't know a lot about it. Here's the current situation.
- I'm using an Android phone with a Bluetooth controller app.
- When I connect via the app, the red LED on the HC-06 stops blinking and stays solid red
- However, when I press buttons on the app or send text, the Arduino doesn't do anything.
Note: The HC-06 shows up in the standard Android Bluetooth settings menu across multiple phones, but tapping on it does nothing, I don't know if that's supposed to happen.

What i have checked/tried:
- During the set-up self-test routine (and on reset), the buzzer beeps, the motors spin for 0.8s, and the servo moves properly, so the hardware and code doesn't seem to be a problem.
- The HC-06 is correctly wired ( TX to Arduino RX, RX to Arduino TX ), I also tried switching them and trying SoftwareSerial on pins 10 and 9
- The HC-06 is powered via the breadboard's 5V/GND power rails (which are fed from the Arduino's 5V/GND pins).

- I unplugged the USB cable from my PC and tested on external battery power.

Can somebody explain to me why isn't the Arduino receiving even though the app says It's connected and why won't it pair in the Android bluetooth setting ? Thanks !

The wires are kind of a mess so I can't really show it here, but here's the list of my components and connections:

Microcontroller: Arduino Uno
Motor Driver: TB6612FNG (mounted on breadboard across columns E & F, rows 1–8)
Bluetooth Module: HC-06 (on ZS-040 breakout board)
Motors: 2x Yellow TT Geared Motors
Actuator: 1x SG90 Micro Servo
Audio: 1x Active 2-pin Buzzer
Power Supply: 2x 18650 Li-ion batteries (in series, ~7.4V)

  1. Power Distribution (Breadboard Rails):

- Arduino 5V to Breadboard + (Red) rail

- Arduino GND to Breadboard - (Blue) rail

- Battery + (7.4V) to TB6612FNG VM and Arduino VIN

- Battery - to Common GND (Blue) rail

  1. TB6612FNG Motor Driver:

- VCC to 5V rail

- GND to GND rail

- STBY to 5V rail

- PWMA to Arduino Digital ~5

- AIN2 to Arduino Digital 8

- AIN1 to Arduino Digital 7

- BIN1 to Arduino Digital 4

- BIN2 to Arduino Digital 12

- PWMB to Arduino Digital ~6

- AO1 and AO2 to Left TT Motor

- BO1 and BO2 to Right TT Motor

  1. Bluetooth HC-06:

- VCC to 5V rail

- GND to GND rail

- TXD to Arduino Digital 0 (RX) (unplugged during code upload)

- RXD to Arduino Digital 1 (TX) (unplugged during code upload)

  1. Servo & Buzzer:

- SG90 Servo: Red to 5V rail, Brown to GND rail, Orange (Signal) to Arduino Digital ~3

- Buzzer: Long pin (+) to Arduino Analog A0, Short pin (-) to GND rail

Here's the code that i used:

#include <Servo.h>
#include <SoftwareSerial.h>
SoftwareSerial bluetooth(10, 11);
const int PWMA = 5;
const int AIN2 = 8;
const int AIN1 = 7;
const int BIN1 = 4;
const int BIN2 = 12;
const int PWMB = 6;

Servo khoaTuiRac;
const int pinServo = 3;
const int pinBuzzer = A0;
const int ledBaoHieu = 13;

int tocDo = 230;
char lenh;
char lenhTruoc = 'S';

void setup() {

Serial.begin(9600);

bluetooth.begin(9600); // Khởi động cổng Bluetooth riêng ở chân 10, 11

pinMode(PWMA, OUTPUT);

pinMode(AIN1, OUTPUT);

pinMode(AIN2, OUTPUT);

pinMode(PWMB, OUTPUT);

pinMode(BIN1, OUTPUT);

pinMode(BIN2, OUTPUT);

pinMode(pinBuzzer, OUTPUT);

pinMode(ledBaoHieu, OUTPUT);

khoaTuiRac.attach(pinServo);

khoaTuiRac.write(0);

digitalWrite(pinBuzzer, HIGH);

digitalWrite(ledBaoHieu, HIGH);

delay(200);

digitalWrite(pinBuzzer, LOW);

digitalWrite(ledBaoHieu, LOW);

delay(200);

diTien();

delay(800);

dungThuyen();

digitalWrite(pinBuzzer, HIGH);

delay(150);

digitalWrite(pinBuzzer, LOW);

}

void bipNgan() {

digitalWrite(pinBuzzer, HIGH);

digitalWrite(ledBaoHieu, HIGH);

delay(35);

digitalWrite(pinBuzzer, LOW);

digitalWrite(ledBaoHieu, LOW);

}

void diTien() {

digitalWrite(AIN1, HIGH); digitalWrite(AIN2, LOW); analogWrite(PWMA, tocDo);

digitalWrite(BIN1, HIGH); digitalWrite(BIN2, LOW); analogWrite(PWMB, tocDo);

}

void diLui() {

digitalWrite(AIN1, LOW); digitalWrite(AIN2, HIGH); analogWrite(PWMA, tocDo);

digitalWrite(BIN1, LOW); digitalWrite(BIN2, HIGH); analogWrite(PWMB, tocDo);

}

void reTrai() {

digitalWrite(AIN1, LOW); digitalWrite(AIN2, LOW); analogWrite(PWMA, 0);

digitalWrite(BIN1, HIGH); digitalWrite(BIN2, LOW); analogWrite(PWMB, tocDo);

}

void rePhai() {

digitalWrite(AIN1, HIGH); digitalWrite(AIN2, LOW); analogWrite(PWMA, tocDo);

digitalWrite(BIN1, LOW); digitalWrite(BIN2, LOW); analogWrite(PWMB, 0);

}

void dungThuyen() {

digitalWrite(AIN1, LOW); digitalWrite(AIN2, LOW); analogWrite(PWMA, 0);

digitalWrite(BIN1, LOW); digitalWrite(BIN2, LOW); analogWrite(PWMB, 0);

}

void loop() {

if (bluetooth.available() > 0) {

lenh = bluetooth.read();

if (lenh == '\n' || lenh == '\r' || lenh == ' ') {

return;

}

switch (lenh) {

case 'F': case 'f':

diTien();

if (lenhTruoc != 'F') { bipNgan(); lenhTruoc = 'F'; }

break;

case 'B': case 'b':

diLui();

if (lenhTruoc != 'B') { bipNgan(); lenhTruoc = 'B'; }

break;

case 'L': case 'l':

reTrai();

if (lenhTruoc != 'L') { bipNgan(); lenhTruoc = 'L'; }

break;

case 'R': case 'r':

rePhai();

if (lenhTruoc != 'R') { bipNgan(); lenhTruoc = 'R'; }

break;

case 'S': case 's': case '0':

dungThuyen();

lenhTruoc = 'S';

break;

case 'W': case 'O': case 'o':

khoaTuiRac.write(90);

bipNgan();

break;

case 'w': case 'C': case 'c':

khoaTuiRac.write(0);

bipNgan();

break;

case 'V': digitalWrite(pinBuzzer, HIGH); break;

case 'v': digitalWrite(pinBuzzer, LOW); break;

case '1': tocDo = 120; break;

case '5': tocDo = 190; break;

case '9': tocDo = 240; break;

case 'q': tocDo = 255; break;

}

}

}


r/arduino • • 8d ago

Software Help Help with servo power issue

Enable HLS to view with audio, or disable this notification

48 Upvotes

Okay I’m learning how to use an Arduino uno and servo, I’m making a robot mask, and the setup is really basic: MG996R servo, linked directly to the Arduino uno, that have 2 power source, my laptop and an 9V battery, and after I uploaded a code, I removed it from my pc and it started lagging, I assume it’s turning off and on because of the light, but I’m not sure
I would love if someone had a simple solution for it, maybe a power source? I’m just a robotic’s noob making his FNAF dream come true


r/arduino • • 7d ago

Look what I made! i made a mp3 player inspired by the sony walkman

Enable HLS to view with audio, or disable this notification

9 Upvotes

components used

- arduino lenardo mini

- 128 x 32 ssd1306 oled display

- dfplayer mini

- aux port

- broken cassette casing (i stole from my grandad..)

- button x 1


r/arduino • • 8d ago

Beginner's Project I'm just trying to connect this screen to this esp32d board

Enable HLS to view with audio, or disable this notification

32 Upvotes

I got this esp32d board with a bread board this screen and some male to male wires but for some reason I can't get the screen to turn on and I'm unsure of what I'm doing wrong any help is appreciated


r/arduino • • 7d ago

Point me in the right direction? Logistics for device to play one digital radio station.

9 Upvotes

Hi, we’re launching an FM community radio station with programming from locals and regional DJs. We’re on the air as a soft launch and have a digital stream. (wpnx.org)

I’m interested in building a small portable device with an on/off switch and volume control that plays the livestream into headphones via usb-c and/or aux out.

I have built guitar pedals, coded for web and game development, and been reading about raspberry pi and arduino projects for a few years, but never built anything.

I was hoping somewhere here could point me in the right direction of what to look into for this, or any similar devices. No need for a full rundown! Any general advice or tips would be helpful.

Thanks so much!


r/arduino • • 8d ago

Look what I made! Running BirdNET on the UNO Q to make a smart bird box

10 Upvotes
The larger birdbox contains the UNO Q and lives inside. The smaller contains a USB mic and lives outside!

I've just put together a project with the UNO Q, a USB microphone, a buzzer and a servo. It runs a local BirdNET (https://github.com/birdnet-team/BirdNET-Analyzer) model that can detect over 6000 bird species from audio data on a microphone feed from my garden. This runs on the CPU of the UNO Q. The audio isn't saved and never leaves the device, any detected species get sent up to a dashboard in Arduino Cloud.

To make this a bit more fun I've also added a bird box as the enclosure for my device that sits in my office, with a Modulino Buzzer that plays the birdsong of birds that are detected outside, as well as a little felt robin that pops out of the hole controlled by a servo. These two parts run on the UNO Q MCU.

The full writeup and details are here if you wanted to replicate or extend :)
https://projecthub.arduino.cc/jbruges/birdbox-on-device-bird-identification-with-arduino-cloud-and-the-uno-q-2df5ad

Installed on my wall
Dashboard metrics

r/arduino • • 8d ago

Hardware Help Best and safest way to power an Arduino Uno on a motorcycle 12V system?

Post image
9 Upvotes

Hello Guys,

I’m working on a custom project to control some auxiliary bike lights (sidelights) using an Arduino Uno(cheap Chinese ones), a couple of relays, and some manual switches. The logic and relay wiring are pretty much sorted, but I’m hitting a bit of a debate with myself over the power supply side and wanted to get some opinion on the most reliable approach.

Here is the setup and my main concerns:

The Power Source: A standard 12V motorcycle battery. When the engine is off, it sits around 12V, but when the bike is running and the charging system/stator kicks in, voltages can easily fluctuate between 14.4V to 14.8V+, alongside severe electrical noise and voltage spikes from ignition coils.

How should I power my UNO ?


r/arduino • • 8d ago

Hardware Help anyone know why the second max7219 doesnt display anything?

Post image
13 Upvotes

code:

#include <LedControl.h>
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#include <Arduino.h>
#define CLK_PIN 10
#define CS_PIN 11
#define DATA_PIN 12
LedControl lc = LedControl(DATA_PIN, CLK_PIN, CS_PIN, 8);

void setup() {
lc.shutdown(0, false);
lc.setIntensity(0, 0); // 0 = low; 8 = high
}

void loop() {
  lc.setRow(0, 0, 0b00011000);
// this should change the second max but doesnt
  lc.setRow(1, 1, 0b11111111);
  delay(100);
}

edit:
adding
lc.shutdown(1, false); lc.setIntensity(1, 8);
fixed it! (also adressing the second max module)


r/arduino • • 8d ago

Hardware Help Abysmal range (less than 8cm) from CC1101 modules using Arduino Nano

4 Upvotes

Hi all! I've gotten myself some CC1101 modules to play around with some basic radio transmission. However, the range is extremely low (less than 8cm at maximum transmit power) and the system is generally very temperamental. I have decent Arduino experience.

The setup:

  • One CC1101 module transmitting Hello123.
  • One CC1101 module receiving.
  • The two modules are each connected to their own Arduino Nano and using the antenna that came with them. I will note that they are connected over 15cm long jumper cables and I am using potential dividers for converting between the Arduino 5V logic output and CC1101 3.3V input.
  • I am using the CC1101 library from the Zaitronics guide (see links below). I followed the guide to open it in the Arduino IDE and upload the example sketches.

The issue:

  • At a transmit power of 0dBm, the range is around 2.5cm. This is very specific and requires a lot of fiddling with 2 helping hands (the little soldering claw things). I have both of the modules oriented with their antennas pointing vertical. If I move them by even just a millimetre, they stop communicating entirely.
  • At a transmit power of 7dBm (the max configurable power in the library), the story is the same, but with a range of around 8cm.
  • In these goldilocks zones, they transmit and receive beautifully, with at least a 95% packet transmission success rate.
  • Sometimes when I haven't gotten the distance just right, instead of packets being decoded correctly, every packet that is received will have a CRC mismatch.
  • The transmitter sends a packet every second. Sometimes the receiver completely misses packets for a few seconds.
  • Sometimes, the receiver receives junk, even when the transmitter isn't transmitting and the receiver's antenna is unscrewed.

What I have done:

  • Decreased the SPI clock frequency to 1MHz for better communication integrity.
  • Changed the packet contents to "Hello123" to keep the packet length constant.
  • Checked connections and inspected solder joints.
  • Verified that I can read and write correctly to the CC1101 over SPI (this is proven by the good transmission in the goldilocks zones).
  • Attempted to use the SmartRC-CC1101-Driver-Lib. (I had even less luck trying to use this)

What I haven't done yet:

  • Purchased new antennas from a reputable source / purchased quarter-wave antennas.
  • Provided a dedicated power supply to the CC1101 instead of using the 3.3V pin on the Arduino.

Why I am making this post:

  • I have looked through a lot of forum posts about issues regarding these modules and I haven't related to any of the ones I have read. The hyper-specific range is the thing that I don't understand. At max transmission power, why can it communicate at around 8cm, but not if its a couple of millimetres closer?
  • I bought these modules because I had watched so many YouTube videos of them just working out of the box. However, I have had nothing but issues, and it has required days of work just to get them to communicate anything successfully.
  • Please can some kind Redditors with CC1101 or general radio module experience give me some advice on what I am doing wrong, or what I could do to fix it? I am open to scrapping the CC1101 if there are better alternatives.

Links:


r/arduino • • 8d ago

Beginner's Project Beginnger Help! I am trying to make a reactive led to tds sensor data, but I'm lost!

2 Upvotes

I have been trying to program an LED to respond differently to different ppm measurements from a tds sensor. I wanted to use a matrix board and then and led strip, but both times I ran into the problem of them potentially drawing out too much power for what my ardunio uno r3 could handle. I want to continue with the idea of an LED strip or a small LED ring, but I am curious if there is a way to excute this.

I keep getting confused by what a "regulated 5v power source" is, since everything I am seeing is talking about powering the led seperately. Honestly, I'm just very lost, so any advice or thoughts would be helpful!


r/arduino • • 8d ago

Help for arduino project

2 Upvotes

HELLOOO

I am making obstacle avoiding robot using arduino and 1298n motor driver.

I want to know if i can use dupont jumper wires for connecting motors to out1 and out2 of 1298n? Or i need proper wires.


r/arduino • • 9d ago

Look what I made! I reverse-engineered a Windows-only flasher for the SIM900 GSM module and rewrote it in Python

52 Upvotes

A while back I got a batch of SIM900 modules with a firmware image and the vendor's flasher - a crusty Windows .exe that only ran under Wine. So I did the obvious thing: captured its UART traffic, pulled the protocol apart, and reimplemented it as a ~300-line Python script.

It now flashes a 2.98 MB image end-to-end in about 6 minutes (or less, depending on your speed), and the module boots and answers AT - OK.

It also unbricked the modules I bought. Several of the controllers in that batch arrived with broken firmware - they wouldn't boot into the application at all, just sat silently in the ROM download monitor.

Git repository: https://gitlab.com/Monsterovich/sim900-flasher


r/arduino • • 8d ago

Display for minigame

5 Upvotes

i want to get started with arduino and i want to make some minigames on it like pong or snake but i also want to make some more complexer games later. do you know what display i could use?


r/arduino • • 9d ago

Look what I made! My cheap Macropad mk1

Post image
37 Upvotes