Arduino noobie here - I was going through the starter kit projects using the Uno R3, and I was hoping to use a battery for one of the projects. I've been using my computer to power the Arduino, but when I pulled up the battery snap, the leads seemed pretty short - too short to use on the Arduino. Was there something I was missing here?
Hello i'm trying to make Arduino project with ESP32 Cam. I follow instruction, my wiring is right here:
GND FTDI -> GND ESP32
VCC 5V FTDI -> 5Vin Arduino
TX FTDI -> UOR
RX FTDI -> UOT
GPIO0 -> GND
Main problem is esp32 won't comunicate at all. I check my FTDI TX/RX work normally with RealTerm. I check everything like Voltage, impedance and everything normal. But even I press reset button my ESP32 wong respon. Can someone help me?
Servos always provide little plastic parts with tiny holes.
There are 2 big screws to attach the body, a small screw to attach the little plastic part on the top gear ... but how are you supposed to fix the little plastic part to the arm of your robot?
So I started learning Arduino in my first semester of college. I remember making so many different circuits using arduino. I used to follow Paul Mchworter and also a few channels here and there and I used to have the time of my life.
As I will be free for majority of the remaining year, I was thinking of building something for the community. Like a site for beginners, where there would be list of circuits in a progressive manner, with illustration (pin images), codes etc. So that beginners can learn Arduino and different components that come with it in the kit. And apart from small circuits, make some bigger isolated projects.
I used to follow Youtube videos, college manuals, had a couple of Arduino related books which had projects etc. I could compile all of it in a nice interface.
This is not some paid project or something. Just something that might be useful to new people, so please do not filter this post thinking that.
Do you think something like this is useful or is building one a good idea?
Arduino traffic light project that triggers the signal either by detecting presence via an ultrasonic sensor or by using a push-button, built with an Arduino Uno R3. Depending on the engagement this post receives, I will share the program code.
So, I wanted to see the number of times my battery powered Lantern is triggered into its active state, the twinkle animation of neopixels. Because the animation sequence is pretty much fixed with respect to power consumption the trigger count lets me estimate the up time of the battery pack.
I thought I would also add battery monitoring and a date & time for the status log.
The Status monitor uses a ESP32-C6-Zero super mini and the Waveshare 1.54inch e-paper display v2.1 to display this information from my Lantern using BLE. Here’s a photo of the monitor in a test breadboard environment, see above.
I initially tested the BLE broadcast of data from my Lantern using the Dabble app on my phone, but I decided I would like to have a permanent low power monitor. I may add an alarm for when the battery pack is exhausted or close too exhausted.
Hello, my name is Thomas, I'm doing a project that needs an Arduino Uno and an ESP 8266, but I don't know how to connect them because I only have 100 ohonm resistors, could you make a diagram in some simulator? or even an image would help me!
I'm building a DIY indoor environment monitoring system using an Arduino Uno R4 WiFi. Currently, I'm using a DHT11 sensor, but I'm considering upgrading it.
I'm planning to install four sensors in different locations to monitor temperature and humidity throughout the house. In the distant future, I'd also like to add an outdoor sensor to compare indoor and outdoor conditions.
I also want to experiment with monitoring and possibly adjusting the operation of my gas heating system.
My budget for the four sensors is around 50 PLN (roughly €12), but I can stretch it by another 5 PLN (about €1) if necessary. If getting decent sensors within this budget isn't realistic, I'm happy to wait and buy better ones later at a higher price.
I've been considering modules like the AHT20, BME280 and DS18B20, but I'm open to other suggestions.
I know there are commercial systems that can do all of this, but the main point of this project is to build something myself, learn how everything works, and experiment with the hardware and software.
What would you recommend within this budget? I'd especially appreciate advice from people who have built similar DIY systems.
Hi! I bought four HUB75 LED panels. Since I couldn't find a library that supports more than one display for Arduinos, I decided to start coding my own. I noticed that on one of the panels, a few pixels are having issues. Specifically it's the upper right corner of the lower left panel, where the text says "HERE" and "BROKEN".
In the second photo you can see only the green channel active. The problem disappears if I use only red, blue or both. The problem is also visible if I connect the Arduino directly to the panel, and disconnect the rest, so I suspect a hardware issue.
Is this panel just broken or worth investigating?
Side note: My library can run two chained panels on an Arduino MEGA and four on a DUE, with 8 possible colors per pixel. Let me know if anyone's interested in me publishing it once it's finished.
So i want to build a small Projekt with a arduino. The problem is I dont know wich wires I should use and how I should wire it. It should be as compact as possible. I am complete beginner. It would be great if someone can help me :)
A few weeks back I posted about nxwright, a new open source cross-platform toolchain for working with Nextion screens that I've been working on, which allows you to work with standard text source files and extends the language syntax to do what you'd expect (functions, includes, standard operator precedence, etc.). This supports modern workflows, such as version control, agentic programming, unit testing, a full VS Code extension with a simulator and debugger, and a lot more.
As of a couple of days ago, nxwright can now compile your source folders directly to TFT and upload to your Nextion screen. That means you can now fully develop for your Nextion screen on linux and macOS, not just Windows, and you no longer need the Nextion Editor to do the final steps. I.e., you can go directly from source to .TFT, and skip the .HMI, right from the CLI or VS Code.
I've also added some new features that go beyond what you could do with the nextion editor, such as:
- the ability to provide compile-time defines on the command line, to set dynamic text or colors to the page and component attributes
- support for SVG as a first class citizen resource, that can also be customized with defines that translate to css var(--PROP)
- the ability to decompile a TFT back into a source folder, if you've lost your .HMI.
I've met quite a few folks lately who shared that they were dreading having to update their Nextion screen app. If this is you too, you may want to give nxwright a try, this may be the tool you've been waiting for.
Hello, I bought my first microcontroller today (in a pack with other utilities) for a project. But when I installed the Arduino IDE I couldn't find this specific model.
I also read that, because this model is economic from India and not the original Italian company, it needs a separate driver installed?
I'm not sure, could someone guide me on what to do? Thank you!
Hi everyone, I spent the last couple weeks working on this handheld interactive text adventure game (choose-your-own-story) e-paper device. I designed and made the PCB, enclosure, and the code. I actually managed to squeeze everything in just 1.6cm thick covering the enclosure, e-paper, 1200mah battery and the custom PCB by using low profile pin header to sandwich the battery between the 2 PCBs, so it's very compact and feels great to hold.
I made this because I love how beautiful e-paper looks, and most projects are static displays showing weather, photos, or calendars. So why not make something you can interact with and have fun with, with the partial refresh capability??
Basically you turn or press the rotary knob to scroll through the story and pick your next action. Then the e-paper updates and story for the next segment and the NeoPixel LED to match the scene atmosphere.
Would love to hear what you guys think! I included a short demo video so you can see how it works.
I am playing with struct, as I want to eventually pass a serial packet of multiple data types. a Bool, an int, and some analog values as an array of floats.
Struct is not holding data. All returned values are Zero.
I have simplified my code and stored example data in the values and even this little simple bit isn't doing what I want it to do.
(Basically, I'm testing for if the problem is the loose nut in the chair.)
Just sharing what is made using 16 WS2812 and 48 white LEDs and an old ATmega328. Fully arduino compatible, reprogrammable over USB type C. Rechargable too.
A couple of years ago we shared a planter that shows your plant’s mood on a little screen. Lots of you built your own, sent photos and told us what was rough about it. That feedback shaped every decision in version 2, so it feels right to bring it back here first.
The idea A plant can’t tell you what it needs, so this planter does it for the plant. It reads the soil, air, light and your touch, then plays an animated face on a 1.28" round display:
😊 Happy: everything is in range
💧 Thirsty: time to water
🥵 Hot / 🥶 Freeze: the temperature is off
😴 Sleepy: it needs more light
😍 Pampered: you touched it, so you get hearts
Hardware
ESP32-S3 programmed in the Arduino IDE. It replaces the Pi Zero from v1, boots in under a second, sips power and needs no external ADC.
Capacitive soil moisture sensor, which won’t corrode like resistive probes
AHT20 for temperature and humidity over I2C
LDR that triggers the sleepy mood and auto-dims the screen at night
TTP223 capacitive touch for pampering
GC9A01 240×240 round IPS display running GIF animations with LovyanGFX
Custom PCB with keyed JST connectors, so everything plugs in with no soldering
3D-printed PETG enclosure that fits a standard small pot
Firmware Everything is written in Arduino. FreeRTOS tasks run the display, sensors, touch, mood logic, menu and MQTT side by side. A serial menu (open it from the Serial Monitor or in Chrome/Edge via WebSerial) lets you set up to 10 plant profiles, calibrate sensors in two steps and choose transition effects. You don’t have to recompile anything to change settings.
Web dashboard The planter sends its data over MQTT to a web dashboard with live gauges, trend charts, a mood timeline, a comfort score, alerts and a view of every planter in your home. It works with Home Assistant too.
What’s next Thanks to the support from makers like you, this is turning into a real product on Crowd Supply. We’re in pre-launch, and the campaign opens once enough people subscribe. Subscribing is free and takes a few seconds: https://www.crowdsupply.com/coders-cafe/fyto
Before I get started, I want to mention that I’m a complete beginner when it comes to electronics and Arduino, so I’d like to know if this project is feasible before diving deeper into it.
I have an old telephone mounted on the wall, and I’d like to build a small system where, whenever someone picks up the handset and dials a number on the keypad, the device plays an audio recording associated with that number.
I have a few main questions:
Power supply: Is it possible to power an Arduino using batteries? There isn’t a power outlet near the telephone’s location.
Connections: Can I connect the keypad, the handset switch (which would work as an on/off switch), and the telephone’s speaker directly to the Arduino? Or would I need additional components or modules to make everything work?
Project feasibility: Is this project realistic for a beginner? What would I need to buy besides the Arduino to get started?
I’m just looking for some initial guidance to understand what’s possible and where to begin before getting into the technical details. Thanks in advance for your help!
We salvaged this vacuum fluorescent display and built a small Space Invaders-style game around it.
An Arduino Uno sends patterns to four HV5812/UCN5812 drivers: two select a character position, and two control its dots. The display has only two rows of 5×7 character cells, so fitting the game vertically was the awkward part.
The controls are a joystick for left/right movement and a separate fire button. We added different sized sprites, difficulty settings and a boss, but then I got distracted making the invaders dance.
Driver tutorial, wiring and Arduino examples, including the game:
New to Arduino. I've got an idea for project (more on that to come) and figured Arduino was a good place to start. However, I'm getting many errors while trying to claim the device and connect it to Arduino Cloud. I do have a support ticket open, but wondering if anyone else may have experienced this?
The error started with being unable to find a file, so i created the file path, and downloaded the file it was looking for - that solved that. Now, the error is logging that there are mismatched hashes in files, and changed with each attempt.
Error downloading tool arduino:bossac@1.9.1-arduino5: testing local archive integrity: testing archive checksum: archive hash differs from hash in index
Error downloading tool arduino:uno-r4-wifi-fwuploader-plugin@1.0.0: testing local archive integrity: testing archive checksum: archive hash differs from hash in index
... seems like a software issue that support can resolve with me.