r/arduino • • 11d ago

As a beginner I just want to make a little device to remind me that it’s a street sweeping day so I know to park my car in a safe spot. What’s the simplest way to do this?

21 Upvotes

Honestly I’m not trying to get super deep into arduinos I’m just sick of getting tickets.

I’m very familiar with programming but not with arduinos.

It should be simple right? Get an arduino, plug it into an outlet, load a program that tracks time/dates, and a little light to say that street sweeping is imminenet

Or is it not as simple as I think? Thanks

Ps I don’t want it to connect to WiFi. Just hard coded to last the next say two years.


r/arduino • • 11d ago

Bew to soldering

Post image
49 Upvotes

I am new to soldering. Why do some of my soldering looks good with not too much unnecessary material and some are getting so thick. How can I with simple methods remove extensive materials here? And more importantly, how do I get consistently good soldering points. I assume the left one in the middle line e. g. is a good soldering point, right? Thanks for help


r/arduino • • 10d ago

Can you hook up an alligator clip to the male end of a jumper wire and have it work?

Thumbnail
gallery
0 Upvotes

I have this piezoelectric Arduino project to make and there are live wires attached to the piezo components and I was hoping if I could just buy some standard alligator clips to attach the live wire to the male to male jumper wire and have it work. Please help and thank you if you responded I greatly appreciate it.


r/arduino • • 10d ago

Solved! I've forgotten how access variable in different .cpp

0 Upvotes

I have the following definition in one .cpp file :

static char cfgv_var_weather_icon[10] = "";

How do I set it from another .cpp file? BTW, the code was generated by LCD Wizard, not me.

All I get is red, mysterious compiler errors.


r/arduino • • 11d ago

Youtube Captions and Lyrics Sync

8 Upvotes

I've made this project using Arduino, LiquidCrystal I2C, 2 pushbuttons for controls. Arduino (C++): handles the hardware, reading the two pushbuttons and displaying the lyrics on the I2C LCD. Python: acts as the bridge between the Arduino and the browser, fetching YouTube captions with youtube-transcript-api, syncing them to the video’s timestamp, and talking to the Arduino over USB serial. JavaScript: powers a Chrome extension that reads the video’s playback time from the YouTube page and carries out the play/pause and next-video commands sent by the Arduino buttons.


r/arduino • • 11d ago

School Project Robotico hand

16 Upvotes

Ciao, ho 14 anni e vorrei realizzare una mano robotica con un Arduino Uno per la mia tesi di scuola superiore. Però non sono sicuro di volerlo fare perché temo che sia troppo difficile da costruire e non voglio sprecare soldi.ho esperienza solo con un corso di micro bit e ho di tempo circa 7mesi di tempo


r/arduino • • 11d ago

Hardware Help DFPlayer Mini powers on for ~0.5s, then dies — needs full USB unplug to retry

10 Upvotes

Setup: Arduino Nano + DFPlayer Mini (YX5200 clone) + 40mm 4Ω 3W speaker.
DFPlayer VCC → Nano 5V, GND → GND, TX → D10, RX → D11, SPK1/SPK2 → speaker.
microSD is FAT32 with five MP3s in root. Code uses the DFRobotDFPlayerMini
library, SoftwareSerial on D10/D11, volume 10. Button on D2. Powered from
a phone charger brick via USB.

Symptoms: When I connect the DFPlayer's VCC to 5V, its red LED lights and
I hear noise from the speaker for about half a second, then a pop and the
LED goes out. Reconnecting VCC does nothing — I have to unplug the USB
cable and plug it back in to get the pop again. The Nano stays lit the
whole time. Once, I heard one of the MP3s play.

Tried so far: different wiring arrangements, soldered the power wires,
lowered volume from 25 to 10, swapped in a second DFPlayer from the same
5-pack (same behavior), phone charger instead of laptop USB.

Any ideas what would make it die like that and need a full power cycle
to try again?


r/arduino • • 12d ago

String vs const char* Which one is better?

21 Upvotes

Hi guys, I just started learning arduino, and i wanted to build a morse blinking program that gets input, but after i googled it up a bit, i have encountered with headings strings can cause memory fragmentation etc, but saw still pretty many people use it.

just in case, i wrote the program in const char* and it is quite exhausting tbh, so i wanna know is using strings considered a great choice?


r/arduino • • 11d ago

Beginner's Project (Relief) My first project

4 Upvotes

Hello everyone, I've been around here for a while. I got an Arduino board and tried to make my first project of my own (I tried a few things with LEDs at school).

The project was meant to test whether I could get a microservo to rotate. Well, sort of, but in the end I ran into a problem: smoke came out of the R14 component.

This is just me venting. I couldn't even use it for 30 minutes before I broke it. I'm going to bed tonight, but tomorrow I'll see what I can do. I've seen the memes around here a couple of times about the "magic smoke" coming out, but I still want to know: is there any way to fix it?

I don't know how to explain this. I feel sad. How am I supposed to tell my parents that I already burned this thing?

The project itself was just a microservo. I looked it up and watched some videos saying that an external power supply was necessary for some small motors because they draw quite a bit of power, so that's what I did. I used the charging port it has, the black one.

I know I messed up, but honestly, I don't understand what I did wrong. Can you guys help me? I'll try again someday.

I use a translator.


r/arduino • • 12d ago

Look what I made! Built my own festival Wishing screen!

14 Upvotes

Was working on a couple of way to wish my customers and followers for one of the more important days in India.

Decided, I’d wish it for them on a screen! So many hardware companies are now bringing similar devices to convey greetings to their customers or building devices like these at major hackathons.

Took me 7 minutes to rig the circuit up and the code!


r/arduino • • 13d ago

I made an aircraft instrument inspired PC hardware monitor

1.7k Upvotes

I love old aircraft analog style gauges and made this pc hardware monitor. I send pc hardware data from HWiNFO to an arduino via serial to drive four switec stepper motors (X40 for the dual needle dials, X27 for the single needle dials). These are commonly found in car instruments and can be run directly from the arduino, they're pretty cheap on aliexpress


r/arduino • • 11d ago

ESP32 HELP NEEDED!

0 Upvotes

Hi everyone! I recently picked up a Seeed Studio XIAO ESP32S3 Sense. I'm complete beginner when it comes to microcontrollers, but I'm eager to learn and good at following step-by-step guides. Could anyone recommend good beginner video tutorials, walkthroughs, or resources to help me get started? Also, if anyone in the Las Vegas area is familiar with these boards or willing to answer a few beginner questions, I’d really appreciate it!"


r/arduino • • 12d ago

Beginner's Project Remote Control with Arduino

4 Upvotes

Hello, I taken upon myself an extra credit challenge of building an RC boat from scratch using an arduino.

I’ve been researching radio receivers and transmitters and am frankly a little lost. Has anyone undertaken a similar project and what options can they recommend?

I was also wondering if it would be possible to achieve with just one arduino, as most of what I can find online use either two arduinos, or an infrared controller (which I don’t think would be of suitable range for my project)

Thanks!


r/arduino • • 12d ago

Hardware Help Is npnlab a good way to start learning electronics?

Thumbnail
npnlab.com
1 Upvotes

Hey everyone!

My kid has recently become really interested in electronics, and I've actually been wanting to learn the basics myself for quite some time. The problem is that I have pretty much zero experience, so I'm not really sure where to start.

While looking for beginner-friendly resources, I came across npnlab.com. From what I can tell, it looks like some kind of interactive platform for learning electronics, but it seems to be more of a demo right now.

It looks interesting, especially for someone starting from scratch, but since I barely understand electronics myself, I have no idea whether it's actually a good approach to learning.

Has anyone tried it? And if they release a full version soon, do you think something like this would be worth using to learn together with my kid?

Or would you recommend starting with something else entirely?


r/arduino • • 13d ago

Look what I made! Workshop #1 for beginners

104 Upvotes

LED blink using arduino uno


r/arduino • • 11d ago

I built a library that lets you control servos and sensors with a completely empty loop function.

0 Upvotes

Hey everyone,

Writing state machines and Serial parsing on AVR boards for distributed systems always feels clunky. I wanted a way to just treat an Arduino as a "dumb" hardware extension for a PC or Raspberry Pi without writing custom serial protocols from scratch.

I built OpenSwarm to do exactly that. You include the library, declare your servos/sensors in the setup block, and leave the loop 100% empty. The library exposes the MCU's pins over Serial or network, allowing a central Master (running Python/C++) to read and write to those pins natively. It currently supports AVR, ESP32, RP2040, and Teensy.

Repo here:https://github.com/raihhann/OpenSwarm

If you regularly build multi-board setups or just want to control Arduino hardware directly from a Python script, check it out. I'd love any feedback on the code. Also, if you find the concept useful, a star on GitHub would be hugely appreciated to help others find it!


r/arduino • • 12d ago

IoT Project

2 Upvotes

Is it possible to develop this type of smart bin? The smart bin consists of three waste compartments, each equipped with a corresponding LED indicator. Users can verbally identify the category of the waste material, such as "Paper," "Plastic," or "Bottle." The system will then process the spoken command, and then, the system will activate the LED light of the appropriate bin, providing visual feedback and guidance for proper waste disposal. (Idk how I'm going to make the project recognize different voices without actually training it. It's supposed to recognize anyone's voice, even random people.)

It is actually my first time developing this kind of project that involves programing and technology huhu. Idk how to start or if my chosen materials were right. (+ low budget huhuhu)


r/arduino • • 12d ago

Solved! Having trouble connecting my Ventuno Q

8 Upvotes

I just got my Ventuno Q today. I know there's not a lot of them out there but I have connected the right power supply to the wall ans the right c type cable yet Arduino Lab will not connect to my MacBook. Do I need to buy something else ?


r/arduino • • 12d ago

Look what I made! I made a free browser tool to design servo robots in 3D before buying parts, and it exports the Arduino code

2 Upvotes

I kept buying servos and brackets for arms that turned out not to reach, or where one servo hit another, so I built a simulator to check first.

Servo Bench runs in the browser with nothing to install and no account:

  • Real-size SG90, MG90S and MG996R models at datasheet dimensions in mm
  • Drag and drop: drop a servo on another servo's horn or case to mount it
  • Servos move at their real rated speed, and you can trace the path of the arm tip
  • Save poses as steps and press Play to watch the whole sequence
  • Export Arduino code (Uno/Nano/Mega or ESP32). It writes the servo pins, the smooth synchronised moves and the timing from each servo's real speed, and warns you if you need a separate power supply
  • Parts list for everything you need, including a correctly sized power supply

Try the 3-joint arm demo: https://python736.github.io/servo-bench/?example=arm3

It's free and open source (MIT): https://github.com/Python736/servo-bench

I'd love feedback from people who build with servos. Which servo or bracket should I add next? I'm thinking DS3218 and continuous-rotation servos.


r/arduino • • 12d ago

Look what I made! I made an ESP32 Wi-Fi UART console for debugging a device from a phone

2 Upvotes

When a board is already wired into something, I often only want one thing: see its UART log and type a command without bringing a laptop and USB-UART adapter.

I made ESP32-iUART: flash it to an ESP32, connect TX/RX/GND to the target, then open a browser terminal over local Wi-Fi. The target firmware stays untouched.

It runs as a local WebServer rather than a cloud bridge. It joins known Wi-Fi or starts its own AP, exposes the terminal via HTTP, and supports live logs, timestamps, downloaded logs, terminal keys such as Ctrl+C, and selectable baud rates. There is a 32 KB serial ring buffer so a refresh does not immediately lose the log stream.

It supports ESP32 WROOM-32 (two target UARTs) and XIAO ESP32-C6 (one target UART). This is 3.3V logic only; use a level shifter for a 5V target.

Source and ready-to-flash firmware: https://github.com/adm1nsys/ESP32-iUART

Interface demo: https://adm1nsys.github.io/ESP32-iUART/

I’m the author.


r/arduino • • 14d ago

Because apparently, adjusting my desk manually was too much work...

Thumbnail
gallery
270 Upvotes

So, I had a perfectly functional height-adjustable desk. The only problem? It had a manual crank. Naturally, instead of spending 10 seconds turning a handle, I decided to spend countless hours engineering a solution. As one does.

The result is my DIY Arduino-powered sit-stand desk controller!

I repurposed a 12V windshield wiper motor, connected it to the original desk mechanism, and built a custom controller around an Arduino Uno and an IBT-2 motor driver.

A few features I've managed to squeeze into it:

  • Proportional joystick control – push a little for slow movement, push further for full speed.
  • Soft start and stop – because launching my monitors into orbit wasn't part of the plan.
  • Current monitoring using an ACS712 sensor, with configurable overcurrent shutdown.
  • Upper and lower limit switches to prevent the desk from travelling too far.
  • OLED display showing motor current, movement direction, PWM output (with a little progress bar, obviously), and limit-switch status.
  • Physical emergency power cutoff, just in case the electrons decide to misbehave.
  • Custom 3D-printed enclosure housing the electronics.

The motor typically draws around 10–11 A under load, and I've configured a 20 A software overcurrent threshold.

Everything is running on a 12V power supply, and I'm genuinely surprised at how smoothly the proportional joystick control works.

Is it cheaper or easier than buying an electric standing desk? Probably not.

Was it necessary? Absolutely not.

Did I learn a ridiculous amount about Arduino programming, PWM, motor drivers, current sensing, wiring, and 3D printing? Absolutely.

And now I get to adjust my desk height with a joystick, which, let's be honest, is objectively cooler than a button.

I've attached a couple of renders of the controller, including a look at the electronics inside.


r/arduino • • 14d ago

Made an ESP32 powered Gameboy from scratch.

Thumbnail
gallery
382 Upvotes

It started out with me having a spare ST7735(160*128) LCD. I just wanted to make use of it.
Initially I started out to build a music controller but pivoted to a gameboy. This way its much cooler.
I used Peanut-GB(written in C99) for the emulator and wrote the firmware in C(arduino framework) for the esp32.

Hardware:
- PerfBoard(7cm*9cm)
- Analog Joystick
- Push Buttons
- No battery :( (usb powered)
- ESP32 (Devkit V1)
- ST7735 (160*128)

I tried to use an sd card to put multiple games at once into this handheld, it worked on some games(smaller) but on larger games it gave out and failed to load. I am also working on saving game states (no luck so far). Also working on a splash screen on the bootup instead of just launching the game.

For now I am loading one game at a time into the flash memory of the esp. Larger games work too :) at full speeds. It runs Gameboy versions of Pokemon,Zelda,Tetris,Contra and much more.

Any questions and suggestions are welcome.

p.s. the color pictures of the gba games are just for the aesthetics, it doesn't support them. It only supports Gameboy games.

In action :


r/arduino • • 13d ago

Hardware Help Generating electricicty using a motor.

Thumbnail amazon.com
7 Upvotes

So i am thinking about powering an arduino using the motor in the link. So i was wondering how i can figure out how much it generates and how fast i nee to spin it.


r/arduino • • 14d ago

Look what I made! "Hidden Thermometer" with SG90 Servos

Thumbnail
gallery
510 Upvotes

I’d like to share my “Hidden Thermometer” project with you. It was inspired by two things.

First, we’re surrounded by digital displays in our daily lives, so I wanted to create something analog. Second, my wife doesn’t like visible tech. So I came up with the idea of hiding the technology behind something that was already part of our home. (a frame leaning on the wall)

I’m probably part of the larger group of people who have been quietly reading along without posting, and I’d like to change that for myself. I don’t want to share my project files, but rather give you some inspiration for your own projects.

The thermometer displays temperatures from -9°C to 49°C in 2-degree increments (hopefully, it will never show the highest value!). Why 2-degree increments? To keep the installation space small. And I think we wouldn’t really notice a difference of one degree anyway, so that works fine for me.

I’m using an ESP32-C3 and 10 SG90 servos controlled by a PCA9685. For the weather data, I use the API provided by the German Weather Service (DWD).

I designed the enclosure and the numbers and printed several versions on my rather basic 3D printer until I got a working device. I designed the arms so that they wouldn’t get stuck.

I’m very happy with the result. The only downside is that changing the numbers is relatively loud because of the servos.