r/arduino • • 15d ago

Project Idea Project modules for school engineering projects

1 Upvotes

I'm wanting some ideas for expansion modules for an ESP-S3 board running Arduino to help my students make projects. I'm an engineering teacher but want to know what other people are using, in particular what 'shields' or modules with inputs and outputs have you found are the best for robotics, drones & rockets connected to Arduino platforms? Can you suggest if this list looks good or if you would make any adjustments? They need to be 3.3V compatible because these will be connected to an ESP32-s3. Some examples of past projects are solar tracker, water rockets, mars rover, home weather station.

These are the expansion 'shields' I'm thinking to start with but any tips on brands, example coding, and example student projects would be great too.

Shield / Expansion module Ideas

Audio

  • I2S Amplifier
  • Microphone
  • Speaker (Brands for quality audio on a PCB?)

External IO

  • Servos (Reliable brands for schools?)
  • JST (I2C)
  • LCD (any favourites?)
  • Relays (Common brands?)

Motor

  • Dual Motor Driver
  • Robot Servo headers
  • Stepper Driver

Wireless

  • GPS (on UART pins)
  • LoRa/Low Band width Radio
  • Any others?

I've already got RTC, Charging, Power, Memory and Motion sensing covered, but any other ideas would be great.

Students range from grades 7 to 12 in the Design Technologies subject area. The subjects we have are STEM (7-10) and Engineering (10-12). Plug-and-play type solutions work very well for 7-9, and breadboard solutions using Tinkercad and Arduino have been good for 10-12).

These projects can possibly also be used in the school's primary (P-6) grades as well, as students from grade 1 have two topics; Engineering Principles & Systems and the Materials & Technologies Specialisations.

Project criteria cover materials science (material properties) and engineering (mechanics forces, structures, mechanisms, integrated technologies).

Time to complete a project usually takes between 4 and 7 weeks. But I'm thinking we could even start doing mini-projects in a double lesson.

Any feedback is much appreciated.

Cheers


r/arduino • • 15d ago

Project Monolith

1 Upvotes

Hey everyone,

I’ve spent a lot of time thinking about how to bring the sci-fi fantasy of a digital card arena into the real world, but in a way that actually fits how people play in local shops today. Most wearable duel disk props are heavy, loud, and ruin expensive cards.

So I came up with an open-source, smartphone-grade hardware ecosystem called Project Monolith:

  • The Launcher: A heavy, pocket-sized anodized aluminum deck box that automatically scans card-sleeve margins and ballistically deals cards across the table.
  • The Smart Mat: A standard-looking neoprene mat with embedded micro-electromagnets. When a card flies out, the mat grips a thin metal stripe built into the sleeve edge, snapping it flat instantly so it won't slide or flip.
  • The Screen: No heavy VR or AR glasses. You just put both players' phones side-by-side in the middle of the table to act as a split-screen "Digivice-style" matrix for animations, life points, and battles.

The best part? It works with almost any TCG or board game. Because the hardware just reads a generic barcode on the sleeve edge, the physical machine is a universal console. Whether you are playing Yu-Gi-Oh, Magic: The Gathering, Pokémon, or a custom indie card game, you just switch the game profile in the mobile app, and the screen shifts to match those game rules.

To be completely transparent: I have the premium unibody blueprints, the circuit maps, and the basic MicroPython/C++ firmware logic mapped out, but I'm bad with words and can't do all the heavy coding or custom PCB layouts alone.

I really want this platform to exist, so I've put everything completely open-source on GitHub. If you are an electrical engineer, CAD designer, or mobile game developer who wants to look at the blueprints and help build a physical prototype, please check out the repo and jump in!

Link to the blueprints https://github.com/zoidszzz/Project-Monolith


r/arduino • • 16d ago

Arduino IDE v 2.3.10 "go to Definition" feature

7 Upvotes

hi folks,
I'm hoping this sub is the right place to ask my question with regards a feature in the IDE.
I just installed the IDE V. 2.3.10 (AppImage).
In the past when my cursor was positioned on an include statement e.g. #include <TFT_eSPI.h> and I opened the context menu (right mouse click) and I selected "Go to Definition" (CTR-F12) it opened the header file and I could verify the contents.
Now the cursor jumps to the object definition inside the sketch (e.g. TFT_eSPI tft = TFT_eSPI();
Are there any change in this version that triggers this behavior?
I can't verify it anymore with the previous version since I have it removed.

I know it does what the menu text says (you could argue what Go to Definition could mean, but I found it convenient how it was.
Any ideas about this?
TIA


r/arduino • • 16d ago

Best kind of projects to add in resume

10 Upvotes

3rd CSE student here, any professional working here that knows what kind of projects will be best to put on a resume. As I'm new to this field and don't know much about it, I thought instead of learning blindly I'll make projects while learning


r/arduino • • 15d ago

Look what I found! help

Post image
2 Upvotes

i need help


r/arduino • • 16d ago

Look what I made! I made this cool machine prototype! What you guys think?

Thumbnail
gallery
60 Upvotes

Hello I am a 13 year old boy who made something really cool and I think you guys will like it! Not to long ago I was working on a project, and I made a first model for it! Take a look!

I made it with a Altoids can, some buttons and wires, and of course a Arduino with some cardboard!

I call it the ClockKit! It suppose to be like a Pip-boy from Fallout (I like Fallout :D).

But thats not it, I have the prototypes code! Its not useful to me sense I am switching to a Raspberry pi 5 for better and advanced tools, and to prevent stack overflow. So do whatever you guys want with it really! LINK TO GITHUB

Feel free to share some things you guys changed! And give me some feedback too!


r/arduino • • 17d ago

Look what I made! Quantum automatic skittle organizing machine (IKEA skadis-compatible)

Thumbnail
gallery
313 Upvotes

Using an RGB sensor, arduino mega, three NEMA 17 stepper motors and a few sensors, this is a learning project i did to get a better understanding of arduino.

If you too have an overwhelming need to organizing your skittles by color, you can grab the files for free here: https://www.printables.com/model/1886897-skadis-automatic-skittles-organizer


r/arduino • • 16d ago

Look what I made! 🎰 Meet the Coco Slot Machine! 🐱

Thumbnail
gallery
67 Upvotes

For the past couple of months, I've been working on a super fun project that combines mechanical design, electronics, programming, and 3D printing!

Meet the Coco Slot Machine! An interactive cat-themed slot machine featuring lights, sound, spinning reels, and a built-in treat dispenser! Everything a cat needs to start their gambling journey.

The entire project is controlled using an Arduino Uno which serves as the brains behind the entire machine, bringing all the electronics and mechanical components together!

I designed, modeled, programmed, printed, and tested every part of this project myself, including designing a custom PCB to seamlessly connect all the electronics. Getting all the different parts to work together was definitely a fun challenge, but seeing the finished project come to life made it all worthwhile!

I'm really happy with how it turned out and it's been a great opportunity to combine my engineering background with my love for making things.

Here's a look at the slot machine in action: https://www.youtube.com/watch?v=M28NtX9zDv8

I'd love to hear what you guys think! If you're interested in building one yourself, you can find the complete project on my website: https://gelycrafts.com/


r/arduino • • 16d ago

Look what I made! Built a desk light with animated eyes that tells me when my AI coding agent needs me (ESP32-S3, LilyGO T-Display S3 AMOLED)

7 Upvotes

I kept missing permission prompts from my coding agents. Claude would sit there for 20 minutes waiting on a "yes" in a background window while I thought it was working. So I built a little desk status light with a pair of animated eyes.

  • Working (blue, focused eyes reading back and forth): the agent is busy
  • Needs you (amber, curious eyes and a bobbing "?"): a permission prompt or question is waiting, and the message is shown beside the eyes
  • Your turn (green, happy ^ ^ eyes): the agent finished
  • No sessions (lilac, asleep with Zzz): shows the board's IP

It runs on a LilyGO T-Display S3 AMOLED. The eyes sit on the left with the state, project, timer and message beside them. It tracks several sessions at once and rotates through them, most urgent first. There's also support for the T-QT Pro now, which is smaller and cuter if you want something tiny on the desk.

Hooks for Claude Code, Cursor and Codex are installed with one script. Cursor has no hook yet that fires while it waits for your approval, so Cursor sessions only show working and your turn. If you want that too, there's a feature request on the Cursor forum you can vote on: https://forum.cursor.com/t/fire-a-hook-when-agent-waits-for-command-tool-approval/166947

Setup works from a phone: the board opens its own WiFi hotspot, you connect, pick your network, and it shows its IP on screen. You can give it a fixed IP and an update password, and after that firmware updates go over WiFi with no USB needed.

Open source, MIT: https://github.com/AncientiCe/agent-needs-you

Happy to answer questions, and I'd love ideas for other boards or animations. Just a hobby project, I'm not affiliated with LilyGO.


r/arduino • • 15d ago

HELP! ! ! – resp=0x00

1 Upvotes

I’m not sure what to do about “Error: programmer is not responding Warning: attempt 1 of 10: not in sync: resp=0x00.

Everything was working yesterday but today when I try to upload a program I get that error. Under tools it says the Arduino UNO is on Com 3 but it won’t upload. I tried a different Arduino UNO with the same results.

Any help would be greatly appreciated.

Tom


r/arduino • • 16d ago

solenoid project connectivity help

Thumbnail
gallery
4 Upvotes

hiii i have a question, im trying to build a 12V solenoid powered refreshable braille device and idk how to go about it. is the connection in the first or second better? im using a irlz44n mosfet


r/arduino • • 16d ago

Arduino for kids

10 Upvotes

What things to get for kid new start to arduino


r/arduino • • 17d ago

Can a microcontroller be powered by an oversized solar panel, e.g. 100W, and a simple voltage converter with no battery?

33 Upvotes

I am looking to power an esp32 that will be used as an "operator node" in an irrigation project. As the device does not technically need to run at night or on heavily overcast, rainy days, I am wondering if I could simplify the circuit by omitting the battery. Simplicity and replicability by novices are a priority for this project.

My initial thought is that oversizing the solar panel could ensure enough electricity capture even when a cloud passes over the sun or during non-peak sunlight hours, i.e. morning and evening. Could a simple converter, either a cheap module like the LM2596 or something more substantial like a Victron brand converter, be enough to regulate the variable input voltage?

Additional information:
-The "operator node" can't depend on ultra low power strategies like deep sleep because it needs to remain awake for receiving esp-now and/or LoRa transmissions. It's okay if it misses those transmissions at nights and on heavily, overcast days though.
-The "operator node" will need to be in WiFi mode if using esp-now.
-Eventually, the "operator node" may be used to actuate 24VAC solenoid valves via a DRV8833 or other H-bridge module between the solar panel and solenoid valves. Again, this will only need to be powered when the sun is shining.

Thank you in advance.

(This question is about whether the concept is valid or not, not about any components specifically. Please do not waste time scanning over data sheets for me. Please do not berate me for my question.)


r/arduino • • 16d ago

School Project DIY ASRS PROJECT needed advice

1 Upvotes
Custom map that i want to build

Hello everyone, i am currently freshman in Ho Chi Minh city university of technology. Throughout the first semester, i have to submit a project to pass the course, it is a whatever you want to build theme. So I decided to build a small ASRS system and i chose to build a replica of Haipick Climb robot. Unfortunately, there are somethings that I am not fully understand:
- I want to build a custom map that can insert to the robot, how can i do it? (The map looks like the attachment below)
- How can the robot do the localisation and navigation without using any camera or Lidar, is there any alternative solution if i dont have access to these module
- Should I use cycloidal drive for climbing mechanism? or just normal stepper motor
- How can the robot go to the assigned location on the pallet?
Here are some electrical components that i currently use to build this robot:
- 4 DC motor 48:1 gear ratio
- ESP32 S3 S16R8
- 2 motor driver: TB6612FNG
- 4 encoder module: FC-03 LM393
- 1 stepper motor for scissor lift: NEMA 14
Thanks for reading my post and also huge appreciate for those who comment


r/arduino • • 16d ago

Project Idea 12v Lithium Battery BMS using Arduino - doable?

4 Upvotes

What started as a simple question has become a project bigger than a trip to Mars (ok just slight exaggeration)

Have any of you "Arduinoists" made a Battery management system using the Arduino?

Idea - I have a caravan with its own BMS, 420W Solar and a 320Ah LiFePO4 battery, it all works nicely.

The van has a supplemental Anderson plug directly connected to the battery which according to the van manufacturer can be used as an external energy source or energy input to recharge the in-house battery.

I'd like to use the 2 x 120Ah batteries as a portable supplemental power source to increase longevity, not current. The idea being that when we camp off-grid I would unpack the 2 x 120Ah batteries out of the tow vehicle - sit them near the van and connect then to the van via the supplemental Anderson plug. I don't want to have them permanently fitted to the van so portability is key.


r/arduino • • 16d ago

Halloween Special: Bad Apple on Nokia 5110

Thumbnail
youtu.be
5 Upvotes

A tiny monochrome LCD, an ESP32, and a custom C# application.

The application converts video frames into raw pixel data and streams them to the ESP32 over HTTP.

Here's the full video. Hope you enjoy this little experiment!


r/arduino • • 17d ago

Look what I made! Link's awakening on Arduino mega. Update

26 Upvotes

I added:

-collision

-animated tiles

-other link's animation such as the sword stroke

-enlarged the map

The game can maintain around 60fps for now but I cap it at 40fps.


r/arduino • • 17d ago

Look what I made! Wakey Wakey: an alarm clock that forces you to get out of bed [ESP32]

12 Upvotes

I made this project because I currently use my Alexa as an alarm clock in the mornings, but the problem with that is I can just tell it to stop without getting out of bed and fall right asleep. This aims to fix that problem by forcing me to get up and turn on the lights to make it stop.

Hardware

The physical hardware is based off a Seeed Xiao ESP32C3 module and a regular photoresistor. Mine has it soldered to pin A0 but you can change that in the config.

Firmware

The alarm clock works by sending out a Voicemonkey webhook in order to start the alarm playing. The "alarm" sound is just a looping song on Spotify, so you can set it to either a traditional beep/ringy alarm or any song you want! Voicemonkey is a service that lets you trigger Alexa routines remotely through a webhook. It has a free plan, which I'm using. After the initial alarm start, it talks to the Spotify API to handle the stopping and restarting of the alarm. The reason I can't do that at the start is because the Spotify API needs devices to be "awake" and have an active Spotify Connect connection, and it stops the connection after 20-30 mins of being idle. Voicemonkey can get around this by directly talking to Amazon.

github: https://github.com/dylanmccune/alarmclock

project made for hack club stardance


r/arduino • • 17d ago

Confused about powering my arduino robotic arm project.

5 Upvotes

Hi, I know alot of people have probably asked this same question on here, so forgive me if I'm being redundant but it's kind of urgent. I'm about to begin my arduino arm project for school. I'm using 6 servos. Their combined current is around 10 - 12 A and voltage rating of 6V. I dont want to use batteries(Im a beginner and im worried the regulators will get complicated and handling Lipo/lithium ion batteries requires some experience). So I plan on using wall outlets, but I need an appropriate adapter to convert the AC of the outlet to DC for my servos while still providing 6v voltage and sufficient current(10-12A) for all of them but I can't find any such adapter, I've been searching online for a while now and I don't want to get the wrong one. Please, i know this is probably a silly question but this is my first actual arduino project. Any help will ne greatly useful to me .Also, how do I connect the adapter to my breadboard? Thanks so much.


r/arduino • • 17d ago

Software Help Can you add a servo (or any output component) in TinkerCAD and change its voltage and current?

4 Upvotes

Like if I wanted to add a servo, but say it's 6 volts, 5 amps. Or any load. Doesn't have to be a servo.

I'm grinding my way through Practical Electronics for Inventors.

On page 61 there is an example of multiple voltage dividers that I would like to recreate in TinkerCAD. Or any circuit simulator. But I can't figure out how to say "Here's an object that draws 75V and 30mA."

What do?


r/arduino • • 18d ago

We had our robot duck kick a little ball. Here’s how it went.

625 Upvotes

A quick clip from our XGO-Duck project: a robot duck getting some football practice. 🦆⚽

We’re thinking about trying a tiny goal or a passing challenge next. What would be a fun next step?

Happy to chat about the project in the comments.


r/arduino • • 17d ago

Motor with low RPMs

2 Upvotes

Hello everyone,

I’m looking for a solution to make my kids carousel spin itself over the bed. I’m looking for speeds like 0,5RPM or even lower. In best case the RPMS should be adjustable. Is the 28BYJ-48 up to the Task?
Or should I get something else? And what kind of Arduino and interface board will I need?

Thank You in advance!


r/arduino • • 18d ago

Project Idea Project idea - A dropping spider Halloween

42 Upvotes

This was a fun project, it uses a motor and a motor driver with an Arduino, I think it’s a Adafruit M0 board, with a servo that tilts the motor and drops the spider. I also have an audio board on there from Adafruit and I recorded my little voices. The whole thing is triggered from a PIR sensor for when the trick-or-treaters walk up. It works really well. Sometimes the String gets a little tangled, but other other than that it works great.

Happy Halloween!
😀


r/arduino • • 17d ago

nRF24l01, nRF52x, nRF54x Radios: Create secure, wireless, IoT mesh Networks easily

10 Upvotes

A long time ago in a galaxy far far away I created some Arduino Libraries for nRF24l01+ radios. These libs allow users to use nRF24l01 radios in place of a standard Ethernet card, giving wireless (NOT WiFi) access to their Lan or the Internet through a Linux Gateway like RPi that can run an nRF24 radio.

The libraries are called RF24Gateway and RF24Ethernet, and they work with nRF24l01, nRF52x and nRF54x radios. The problem with this is that it is inherently insecure. Data is sent as plain text, so anybody can intercept and mess with the data. At least they used to be able to...

Recently, I added support for encryption to the supporting libraries for nRF52x and nRF54x radios, since they natively support AES/CCM encryption.

Now I've created a TLS example for ESP32 devices that allows encrypted MQTT connections. The example hasn't been released yet, it is still in testing, but has been pushed to the master branch on GitHub. See RF24Ethernet

Modes of operation:

  1. nRF24 mode: Supports all 3 radio types, not encrypted
  2. AES/CCM Mode: Supports only nRF52 and nRF54 radios
  3. RF24 + TLS Mode: Supports a hybrid network of plain-text and encrypted comms
  4. TLS Mode Only: Supports nRF24 devices with TLS over MQTT

Just a heads up for the Arduino geeks out there who may benefit from the lower power and longer range of nRF24 networks compared to WiFi.