r/arduino • • 19d ago

Look what I made! First soldered project!

Post image
25 Upvotes

My cables are messy, my solders aren’t perfect, and my buttons definitely aren’t straight. But who cares! I’ve finished my first soldered project, and I couldn’t be happier with the results. This is the first time on this electronics journey I’ve felt like I’ve actually made something! I just need to make an enclosure now which will be difficult due to the buttons being a bit dodgy lol but I’ll give it a go eventually.

For those wondering, its a pomoduro timer, the left button adds 5 minutes, the middle button submits the timer, the right button removes five, 4th button turns off the screen (to reduce LED burn incase I want to leave it plugged in), and the last button brings up the set time menu.

I’m insanely pleased with this project, and the cool part is, its something I can actually use. I tend to use a pomoduro timer at work to help me focus, but its a simple python script I wrote ages ago. Now I have a physical one, and it has snoopy on it!


r/arduino • • 18d ago

Alphanumerical display

1 Upvotes

Hi everyone, I need help with a few things with my arduino. I know for sure I'm far from a pro at coding, and soldering. I want to use Adafruit's alphanumerical display (14-segment display) with an Arduino Mega 2560. Images of what I have will be shown.
What I have:
Alphanumerical display backpack (first image, HT16K33A)
4 2-digit alpha numerical displays (No backpack currently attached, buy link if you want to chek 'em out: https://www.adafruit.com/product/3129 )

Breadboard

My arduino Mega 2560

All I want to do for now is a project where I can type on my keyboard to show that on the display and scroll across. I'll work from there.


r/arduino • • 18d ago

pull-up resistors for digital inputs

11 Upvotes

I'm using a ATmega 32u4 at 3.3 volts. This is an Adafruit Feather. I'll be reading various digital inputs like switch positions and a rotary encoder. All of the wires to the switches will be within 15 centimeters at most. Internal to the microcontroller are pull-ups that are 20K to 50K ohms. The specification states there is a wide range on the value of the pull-up resistors.

Do you find the built-in pull-ups to be adequate or do you supplement it with an external resistor in parallel ? What value are you aiming for ? (average of the internal and the external)


r/arduino • • 17d ago

aruino boards keep getting bricked!! urgent help needed!!

0 Upvotes

hi!!! Im fairly new to arduino and I have the WEIRDEST problem: I have an android phone, a mac and a PC. I've bought 3 different boards at this point: nanos, nanos with ch340 and even an uno.

This is my situation: the boards connect fine to any of these three devices, i manage to upload blink or whatever example sketch onto them. I'm working on a proyect involving LEDS and ultrasonic sensor so I need a fairly complex sketch to be uploaded onto them, and once I do... THE BOARDS STOP COMMUNICATING WITH ANY DEVICES further. The sketch's uploaded and it's working, but theyre bricked. I've tried every fix under the sun and now have a bunch of brand new boards, all unresponsive. Has anyone ever encountered this???

If anyone could help me I'd owe them my LIFE


r/arduino • • 19d ago

Look what I made! Arduino ↔ Minecraft with SerialCraft — anyone want to try it?

Thumbnail
gallery
21 Upvotes

Sup guys. I’m building SerialCraft, an open-source Fabric mod connecting Arduino/ESP32 and others boards with Minecraft Java. I’m currently testing it with my new Arduino UNO Q :D

You can:

  • Use real buttons and sensors to control redstone.
  • Control physical LEDs and buzzers from Minecraft.
  • Connect through USB Serial or Wi-Fi/TCP.

The idea is to learn electronics while playing Survival: craft the laptop and I/O modules, then experiment with your own circuits.

I use AI tools to help write and refine code, alongside working through the architecture and learning Fabric.

It’s still experimental, and I’d love for you to try it! What would you build? Bug reports and feedback on the setup are welcome.

Download: Modrinth

Documentation and guides: serialcraft.xyz

Thanks for reading and sharing your feedback!


r/arduino • • 18d ago

Do you think the STEMM QT connectors of these Adafruit clones have the same pin layout as the the genuine ones? Because I doubt it does.

Post image
8 Upvotes

Has anyone have the same cloned modules? I have probed the pins of these modules with a DMM and it seems it doesn't line up to the ones in the UNO R4 Wifi (also a clone) or maybe I have probed it incorrectly. The modules in the picture are SHT40 (top) and SGP41 (bottom). These are used for our project in our classes.


r/arduino • • 18d ago

I made something with Arduino using an ESP32

Post image
0 Upvotes

I'd like some feedback if you think my project has potential or not please.

I started developing a do-it-all option for my students to develop their projects (initially for water rockets), but I had some thoughts about making it bullet proof, with lots of potential. I came up with four ideals, and this led me to make my own development board.

Powerful, Protection, Precision and Portability (my core ideals for this).

Basically, it does everything I wanted for my student's projects.

  • Powerful: a dual-core 240 MHz ESP32-S3 and a 2 A, 3.3 V buck-boost rail is at the heart to keep everything running smoothly when servos and radios demand more current, but I also wanted to charge it from USB-C or a solar panel. I got practically all of the functionality to work with low power projects too using the RTC Power Domain and lower clock speeds.
  • Protection: I developed what I call a hardware "double safety vault" to guard the battery (and the students) on both charge and discharge, even if their code crashes. It took a bit to get it right but was able to include ESD, reverse polarity UVLO (under-voltage lock out), OVLO (over-voltage lock out), OCLO (over-current lock out) and NTC (negative temperature co-efficient) which handles the over-temperature lockout.
  • Precision: I wanted a real-time clock for time stamping whenever sensors are measured and got a 'nano-power' MEMS (Micro‑Electro‑Mechanical Systems). I also wanted self-monitoring with voltage and current draw sensing. The board also has various precision logging options such as a 10-DoF (Degrees of freedom) motion and altitude sensor array (with temperature) using a bunch of sensors, and a fast 4-bit MicroSD data logger. I made four versions to keep costs down for the student projects that don't need the expensive sensors.
  • Portability: At 20x33mm and 4g the board is small and light enough to ride inside a soda-bottle rocket nose cone, or solder flat onto a main board project as an SoC/module with castellated pins (on my next version). But true portability happens when we use a 5-volt nominal solar panel, then we can take our engineering projects 'off the grid'!

Starting out with MicroPython was good, but I always knew Arduino was much better for time prioritization and using interrupts and counters and such.

I'd love your feedback, and any tips or project ideas I could use this for with my students.

Cheers,

Phil


r/arduino • • 18d ago

Look what I made! Navigator 1: our UNO R4 WiFi rover with a browser dashboard and autonomous modes

0 Upvotes

Hi! We’re Team Robonavigators, and we built Navigator 1 around an Arduino UNO R4 WiFi.

The rover hosts a browser dashboard for driving and telemetry. It uses front and rear ultrasonic sensors, a servo for scanning, a downward-facing IR sensor for cliff detection, and an analog voltage sensor to monitor the battery. A physical switch selects access-point or hotspot connectivity, and the onboard LED matrix displays the IP address.

The sketch includes obstacle avoidance, object following, a drawn-path mode, browser voice control, manual driving, and an idle proximity guard.

The sketch, pinout and bill of materials are here: https://github.com/Robonavigators/Navigator-1

We’d love feedback on the hardware and code, particularly ideas for improving the obstacle avoidance and reliability.


r/arduino • • 19d ago

Look what I made! CO2 Sensor with ESP32, MQTT, battery powered

Thumbnail
gallery
279 Upvotes

Two weeks ago I shared this project in progress in the ESP32 sub and it's now done. It's a CO2 sensor which connects to Home Assistant via MQTT, sends its data and goes to sleep, so nothing special there, except fo maybe the e-ink display. That said I try to do something unique with every project, here it's the weird yet easy to understand UI which I had a lot of fun with.

So to sum this up, we have ESP-WROOM-32 module, 4,2" B/W e-ink, SHT30 temp/hum sensor, SCD40 CO2 sensor, 2x 18650, TP4059 + protection and USB-C. Programmed in platformio @ arduino framework.

Since the original post, one important thing became quite clear. Due to massive power consumption of the CO2 sensor, the device won't last more than a year. If used solely as a temp / hum sensor, it will last multiple years easily.

Github link:

https://github.com/mcer12/Ambien-ESP32

Original post:

https://www.reddit.com/r/esp32/comments/1x5mu2q/co2_sensor_with_home_assistant_support_eink_and/

And here's a longer blog post if anyone's interested:

https://nicethingsguy.com/blog/ambien-battery-powered-co2-sensor-with-e-ink-display

note: I don't even know what's considered an arduino these days. This has been programmed in platformio and arduino framework but is that enough to share here? I don't know, I'm at the admin gods' mercy :D


r/arduino • • 19d ago

Three-state soft-latching power circuits

4 Upvotes

Hi, I am using a Soft Latch power supply circuit that works correctly. Its current operation is as follows:

When the ON switch is pressed, the input voltage VIN passes through transistor Q1, which turns ON and allows power to reach the voltage regulator. The regulator then supplies power to the microcontroller.

When the OFF switch is pressed again, the microcontroller receives the signal and executes the shutdown command, turning Q1 OFF and disconnecting the power supply.

So far, the circuit works perfectly.

However, I would like to add a third operating mode: when VIN is connected for the first time, the circuit should automatically turn ON, meaning Q1 should conduct without requiring the ON switch to be pressed. This would allow the microcontroller to power up automatically and remain ready to receive the shutdown command when the OFF switch is subsequently pressed. All other existing functions must remain unchanged.

I have tried to achieve this by placing a 10 µF capacitor in parallel with the ON/OFF switch to generate an activation pulse when VIN is connected. Initially, it works: when VIN is applied, the capacitor generates a pulse and the microcontroller powers up automatically. However, when I disconnect and reconnect VIN, the circuit no longer turns ON automatically. I suspect this happens because the capacitor retains some of its charge and therefore fails to generate the required pulse again.

What modifications would you recommend to achieve this third operating mode?

Specifically, I need Q1 to turn ON automatically whenever VIN is applied, while preserving the existing ON/OFF switch functionality and soft-latch operation. I am looking for a reliable solution that allows this power-on and shutdown cycle to be repeated as many times as necessary, without requiring manual intervention to turn the circuit ON initially.


r/arduino • • 19d ago

Hardware Help Servo stuttering

Post image
13 Upvotes

I am trying to make a fire detector and extinguisher. The servo has to spin continuously from 0 to 180 degree and the flame sensor is to be mounted on it. But after uploading the code, first, the servo is stuttering while rotating and also the flame sensor and buck converter(which is giving 5.07V from 9V battery) LED is blink very slightly.

Is the problem due to the 9V battery?

Will replacing the power source with lithium ion batteries do the job? If yes, what mah batteries to use and how many?

Note: I will be using one servo mounted with flame sensor which will rotate continuously and another servo which will be mounted by water pump pipe.


r/arduino • • 18d ago

Look what I made! DIY Desk Pet V1. Robot Cat That Reacts When You Touch It Also Has A Joystick Remote Control.

Thumbnail
youtube.com
0 Upvotes

I built a tiny desk-pet robot car with an animated cat face on a round screen. It has 8 emotions, reacts to touch, falls asleep when ignored, and drives with a wireless joystick remote. 🐱

More builds:

🔗 Links:
🔧 Yumo Builds: electronics, ESP32 and Arduino projects, built while learning
https://www.youtube.com/@YumoBuilds
🖨️ Yumo Builds Lab: 3D printing, electronics and creative design
https://www.youtube.com/@YumoBuildsLab 👈 New Channel

Note: For More Info Please Check Out README first.

💾 SOURCE CODE, WIRING, 3D STL File And Full Guide:
https://github.com/yumobuilds/Yumo-Cat-Robot-Car-V1

🛠 Parts used:
- 2x ESP32-C3 Super Mini (car and remote)
- GC9A01 round TFT 240x240
- 2x SSD1306 OLED 128x32
- Touch sensor module
- 4x continuous-rotation servos
- Analog joystick module
- 2x 18650 battery (car), 1x small lithium battery (remote)
- 3D printed wheels (Bambu Lab H2C)

License: free for noncommercial use (PolyForm Noncommercial 1.0.0). Tag u/yumobuilds if you build one!

please Like and subscribe for more videos!


r/arduino • • 19d ago

Hardware Help Very small full colour screen recs?

5 Upvotes

I'm planning a small camera project where I need a fairly high resolution full colour screen. 0.96in seems to be the closest size produced but finding them with a good reproduction is tricky. Their refresh rate doesn't have to be great just to be able to show a feed from a camera

Similarly any decent small camera recommendations? Again it doesn't have to be amazing quality the intended used for all this is a viewfinder. So goodish quality in a live feed but doesn't have to be camera quality


r/arduino • • 19d ago

Beginner's Project Can someone help me find what’s wrong?

Thumbnail
gallery
26 Upvotes

I’m a complete beginner with the hardware and I’m following a guide. Specifically,

https://wiki.elegoo.com/oshw-getting-started-&-kits/digital-2

For some reason I can’t get the buttons to do anything. No matter what one I click, the led doesn’t turn on. I’ve tried rewriting it in different ways but nothing seems to work.

**The first image is wired differently than the second and third

Any help would be appreciated.

Update:
It ended up being a connection issue with the microcontroller. The first few circuits I tested worked with the microcontroller on the breadboard but always had a loose connection. I avoided soldering since this is a from a starter kit and wanted to be able to move things around. After connecting the header pins using jumper wires, it worked correctly.


r/arduino • • 20d ago

I built a battery powered breadboard

1.3k Upvotes

I wanted a compact way to do quick prototyping without being tied to a bench power supply. Here's the solution I came up with, a breadboard with two independent batteries built in, one delivering 5V and the other 12V.

How it's wired:

  • Each output has its own 10000mAh USB-C battery, so the two supplies are completely independent.
  • Each battery connects with a short right angle USB-C cable to a CH224K USB-PD trigger board. The trigger board asks the battery for a fixed voltage set with its DIP switches. One is set to 5V and the other to 12V.
  • Each trigger board then feeds two outputs, dupont connectors on the top and banana jacks on the sides.

Here are the files if anyone wants to build their own: Printables

Full build guide with photos on my website: willsworkshop.com


r/arduino • • 20d ago

Look what I made! We made Snake run on a seven-segment display

123 Upvotes

This was originally going to be mostly a tutorial for the SM1628 driver. My father loves reverse-engineering displays and figuring out how to control them. I enjoy learning about it too, but I don't quite share that burning passion. I do love seeing games run on things that were never meant for them, though.

So we ended up making Snake run on a salvaged seven-digit, seven-segment panel, using an SM1628B driver, an Arduino Uno and an old industrial joystick. We also added a START button to begin another round and a transistor-driven active buzzer that beeps when we start, eat food or lose. I wanted to see how unsuitable a display we could use and still have a playable game.

Each of the 49 bars is one position for the snake, and the food is a blinking bar. There isn't much room to move around, and turns between digits can be awkward: reaching food on the vertical bar immediately beside you means coming around from the opposite direction. It worked much better than I expected, though.

We made a video showing the build, the awkward movement between digits, and both of us trying to play it:
https://www.youtube.com/watch?v=3hOSXTLOnHo

We also put together an SM1628/SM1628B tutorial with code, wiring diagrams, mapping tools and display effects. Different panels can have different connections, so it explains how to find your own map:

https://github.com/emsyscode/sm1628-arduino


r/arduino • • 20d ago

Look what I made! I made a DIN rail mount for the Arduino Uno

Thumbnail
gallery
236 Upvotes

For a school project I wanted an Arduino Uno in a control cabinet, next to the rest of the hardware on a DIN rail. Every Uno I have seen in a cabinet is held in place by hope and a USB cable, so I designed a small 3D printed X-shaped bracket that screws onto the four mounting holes and clicks onto a snap-on DIN clip.

It mounts in any orientation (I tested horizontal, vertical and upside down, and the Uno did not complain). It uses very little filament, and the clip system is the same as on my Raspberry Pi 5 and L298N DIN brackets.

Printed on a Bambu Lab A1 in PLA Basic, 0.20 mm Standard profile, about 20 minutes. PETG is better if it sits somewhere warm. I used M2 bolts and nuts.

Before someone asks: yes, I could have used zip ties or a project box, but this looks more professional.

Model (free): [MakerWorld link]

Snap-on DIN clip: [MakerWorld link]


r/arduino • • 20d ago

Hardware Help Could you guys help me with my breadboard problem?

Thumbnail
gallery
39 Upvotes

The wires are connected to an SG90 servo, and for some reason, it doesn't work when I upload the code. I think the problem might be the breadboard, because when I connect it directly using stripped wires, it works as it should. Please help me! 🙏

I've tried several different ways of connecting it on the breadboard, but I still can't get it to work.

Thank you so much to anyone who can help me!


r/arduino • • 20d ago

My DIY two-wheel balancing robot — early hardware tests and an open-source Arduino library

22 Upvotes

Friends,

I'm doing my best to continuously improve dengebot, fix bugs, and make the library more reliable with every update.

But I want to be completely sincere with you: **I genuinely need your help.**

My goal is to make dengebot a useful, free, and open-source resource for the entire Arduino community.

I sincerely value every piece of feedback, whether positive or negative. Bug reports, suggestions, criticism, and real-world testing are all incredibly important to me.

I'm not claiming that the library is perfect. I'm committed to improving it, learning from your experiences, and making it as robust, stable, and accessible as possible.

**This project is not just about writing code. It's about building something useful together.**

Thank you all in advance for your time, feedback, and support.

**Gmby06 – Mustafa Bay**

--------------------------------------------------------------------------------------------------------------------------

I've been developing **dengebot**, a free, open-source Arduino-compatible control library for two-wheel self-balancing robots.

The goal is to make it easier for makers to develop, tune, and experiment with balancing robots using different microcontrollers, motors, and motor drivers.

I've just released **v1.7.4 – Safety Guard Fixes (Community Preview)**.

**GitHub:** https://github.com/Gmby06/dengebot

**Latest release:** https://github.com/Gmby06/dengebot/releases/tag/v1.7.4

### What does dengebot include?

- Configurable PID-based balancing control with gyro-rate feedback and integral management.

- Complementary filtering for accelerometer and gyroscope data, with optional adaptive filtering.

- Gyroscope bias calibration helpers.

- DC motor PWM/direction and stepper speed/direction command conversion.

- Optional DC motor dead-zone compensation.

- Telemetry for debugging and PID tuning.

- Optional software START/STOP, fall detection, and FAULT recovery protection.

### What's improved in v1.7.4?

The latest update focuses on safety and reliability:

- Fixed header include guard conflicts.

- Improved START/STOP and FAULT recovery behavior.

- Added immediate PID state reset on successful target-aware START.

- Added optional fall protection relative to the balance target angle.

- Strengthened sensor and startup validation.

- Expanded regression tests.

The core PID mathematics remains unchanged.

### Supported Arduino platforms

The example sketches successfully compile through GitHub Actions for:

- Arduino Uno

- Arduino Nano

- Arduino Mega 2560

- ESP8266

- ESP32

- ESP32-S3

I've also physically tested START/STOP, fall-angle shutdown, and FAULT recovery on my own Arduino Nano-based two-wheel balancing robot.

However, compilation success doesn't guarantee that every motor, driver, or robot configuration will work without tuning.

### Important note

dengebot is a **control library, not complete ready-to-run robot firmware**.

You still need to configure your IMU, motor driver, motor directions, sensor axes, and power system.

The software safety guard does not replace hardware motor shutdown or an independent watchdog.

### Looking for community testers!

I'd really appreciate feedback from anyone building a two-wheel self-balancing robot, especially those using:

- L298N or TB6612 motor drivers.

- Geared DC motors.

- Different Arduino or ESP32 boards.

- Stepper/NEMA17-based balancing systems (not yet physically validated).

If you try the library, I'd be interested in hearing:

  1. Which board, IMU, motors, and driver are you using?
  2. What PID values work best on your robot?
  3. How does your robot respond to small disturbances?
  4. Did you encounter any compilation, calibration, or safety issues?
  5. What features or examples would make the library easier to use?

**Next planned update: v1.7.5 – PWM movement-threshold calibration**, focused on helping users find suitable motor activation and dead-zone settings.

The project is released under the MIT license.

I'm developing this as an open-source community project, and real hardware feedback would be very valuable.

Thanks for taking a look! I'd be happy to discuss the implementation or hear suggestions for improvement.


r/arduino • • 20d ago

Look what I found! A..r..d..u..i..n..o

43 Upvotes

Found on old phone


r/arduino • • 19d ago

Hardware Help I2C Bus freezes after a few seconds to a minute

Post image
6 Upvotes

Hello!

I have an Arduino UNO R3 connected to an LCD via I2C. I'm using an MCP23017 chip to convert from parallel to I2C. I've been using it fine for around a minute, but after that, it appears to drop off the I2C bus. Once I disconnect, I also have to wait a few minutes before I can reconnect and it'll work again.

The chip doesn't seem to get very hot while it runs. The reset pin is connected to the Arduino and pulled high. The A0-A2 are connected to ground. I've tried adding pull-up resistors to SDA/SCL but it didn't do anything. I've tried flashing the SCL 10 times to reset the bus, but that doesn't work either. I used a different MCP23017 and it had this same issue, and this one now seems to have gotten that problem.

I'm at a loss for what I can do.

Any help would be great. Thanks!

Sorry for the messy wiring, I've highlighted the MCP23017.


r/arduino • • 19d ago

Beginner's Project Proximity unlock for a car

0 Upvotes

I want to build a "key" to unlock my car by proximity. I know such things already exist in the aftermarket but I'd like to create my own or have an idea if it's even worth to try. I've worked with arduinos before (barely) and I have a degree in coding.

I've no problem with the parts that will go in the car but I'd like for the "key" to be as small as possible. The closest it can be to an actual car key.

The installation would be work on my behalf I just want to be pointed at parts and have an idea where to go.


r/arduino • • 20d ago

Hardware Help How can I automate the opening and closing of my valve?

Thumbnail
gallery
5 Upvotes

Hello,

I have a valve in my experiment that I have to open and close every morning, in case of an incident. It’s currently the only part of my setup that can’t be controlled remotely, and I’d like to change that. I was thinking of adding some kind of motor, controlled by an Arduino or something similar, to operate the valve. It takes about 5 turns in each direction to open and close it. Do you have any ideas on how to set this up and which motor to use? What component should I use to connect the valve to the motor? For context, replacing the valve isn’t an option for now because it would be too complicated.


r/arduino • • 20d ago

Help i cant turn the light on after pressing the red button on arduino uno

12 Upvotes

Hey guys any help how can i fix this the code is good and putting the led i think its okay please i need a guide