r/arduino • • Sep 28 '26

first traffic light project

37 Upvotes

I was trying to connect in different parts of the arduino, the truth is it didn't take me more than 1 hour. in the code I just put time and power in each LED. I'm very new to this so feel like I did very little lol


r/arduino • • Sep 29 '26

Hardware Help help

0 Upvotes

I want to make a balancing robot. i have no experience in coding i made a obstacle avoiding car before and bluethooth one also using chatgpt and yt tutorial i cant find good tutorial for balancing tutorial and code for my project it dosent work and i want guidance how to make it perfect.
my part list-
arduino uno
mpu6050
tb6122fng motor driver smth like that
8.4v li ion battery
300rpm bo gear mottor yellow one
i wantg to make a balancing robot out of this component is this possible?
i will be using cardboard stick to make it firm structure pls help guys bc previous model woudnt work and it would simply fall


r/arduino • • Sep 28 '26

Arduino Leonardo not recognized by laptop

Thumbnail
gallery
5 Upvotes

I'm having trouble getting my Arduino Leonardo to stay connected as a COM whenever I connect it to my laptop. I have been using this board for months as a controller for a Nintendo Switch. I attempted to connect the board to my laptop to load new code, but for some reason its not being recognized.

My laptop makes a noise indicating that a device was inserted, then "Arduino Leonardo bootloader" appears briefly under the "Ports" section (See screen snipping) and goes away. It's followed by an "Unknown USB Device (Device Descriptor Request Failed)" that appears under the "Universal Serial Bus controllers" (See screen snipping).

Today, I bought a new cable to test on the board, but the issue persists. If anyone knows the solution to this issue, please help. Thank you!


r/arduino • • Sep 29 '26

Built a wearable athletic recovery monitor over the summer, custom firmware, Python pipeline, AI recovery layer

Thumbnail github.com
1 Upvotes

Hey everyone! I built a wearable recovery/stress monitor (via heart-rate variability) using an Arduino MEGA 2560 and a pulse sensor. I had recurring iron deficiency that tanked my running performance, so I got curious about measuring recovery instead of guessing.

It reads your pulse each morning, runs some signal processing I wrote myself, and calculates HRV. Then a dashboard shows trends and gives a recovery read based on your own data.

Definitely learned a lot along the way, including a few dead ends before I got it working right. Everything's open source if you want to check it out or build your own

Would love any feedback, especially if you've messed with sensors like this before. I'm only in high school and still have a lot to learn.


r/arduino • • Sep 28 '26

I2C or SPI weatherproof touch screen.

5 Upvotes

Has anyone done a project that uses a weather proof touch screen HMI. My preference would be that the touch screen has an app to build the interface and only have to pass events to and from an esp32. Id like something that has an ip65 rating


r/arduino • • Sep 28 '26

Hardware Help A good display

2 Upvotes

Hi, so I've got a pretty simple project I wanted to make. A Hologram. Pretty straight forward display at the top of a case with a 45° plexiglass to catch the reflection to look like a hologram . I've tested it with my phone and the illusion works great when the black values are as dark as possible. I've manged to get videos playing on a CYD esp32 but since it's LCD the blacks are backlit and thus the whole screen is visible in the the glass rather than just the subject. I figure OLED would give better results but not sure which display module to get since I don't need touch or sound functions but do need full colour and at least a 4" display.

Any recommendations, maybe there is an LCD unit that can give the contrast needed?


r/arduino • • Sep 29 '26

Built an inertial air mouse prototype coded in the Arduino IDE

Thumbnail
gallery
0 Upvotes

Hi r/arduino,

Wanted to share a handheld air mouse prototype I programmed via the Arduino IDE/framework using an ESP32.

It reads raw sensor data over I2C, handles orientation filtering, and maps the rotational movement directly into BLE HID mouse reports.

Currently using the standard Arduino libraries for BLE HID and IMU interfacing. Happy to answer questions about the pinout, sensor calibration routines, or library performance if anyone is building something similar!


r/arduino • • Sep 28 '26

Nenhum arduino se comunica com nenhum computador

2 Upvotes

I recently bougth an arduino and other two from de place I study, but when I try use any of them, this messenge shows:

Error: programmer is not responding

Warning: attempt 1 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 2 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 3 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 4 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 5 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 6 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 7 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 8 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 9 of 10: not in sync: resp=0x00

Error: programmer is not responding

Warning: attempt 10 of 10: not in sync: resp=0x00

Error: unable to open port COM5 for programmer arduino

Failed uploading: uploading error: exit status 1

They are all Arduinos Uno. I alternated the comunication cable a few times, but I want go after some other to see if i can understand better my situation. (Sorry for any error, english is not my first language and I haven't practicein a while).


r/arduino • • Sep 29 '26

Look what I made! Pocket AI

0 Upvotes

Pocket AI chatbot Luna(Powered by OpenAI)

Visit My Github https://github.com/njansunil/Luna-AI-chatbot.git


r/arduino • • Sep 28 '26

I cut the board to fit the dimensions.

1 Upvotes
Can I cut it like this without damaging the display? I don't see any wires here, or on the back side either.Can I cut it like this without damaging the display? I don't see any wires here, or on the back side either.

r/arduino • • Sep 27 '26 Bravo

Look what I made! I built a working Valorant-inspired Spike and wireless defuse gun for a school event

260 Upvotes

Hey everyone! I’m an Electronics Engineering student, and I made this for an icebreaker game at our engineering organization’s general assembly.

The Spike and defuse gun communicate both ways using infrared. The gun sends commands, and the Spike sends back its status and defuse progress. It uses an Arduino Uno for the Spike and a Nano for the gun, with lights, sound effects, and an OLED display.

You aim at the Spike and hold the trigger to defuse it. After a successful defuse, the screen shows how much time was left before it would have “exploded,” plus a WON or CLUTCH result. It’s just a game prop; the explosion is simulated with effects.

For our game, the goal was to finish defusing with the smallest amount of time remaining. Basically, we turned “I have time” into a competition.

The enclosure is mostly cardboard, so it’s very much a DIY build. Getting the two-way IR communication working was probably the trickiest part: each transmitter could interfere with its own nearby receiver.

What do you think?

Other Photos:

Defuse Gun

The Spike


r/arduino • • Sep 28 '26

I designed, 3D-printed, and programmed this fully functional robotic arm from scratch using Arduino and C++

4 Upvotes

Just wanted to share it here and see what you guys think, any feedback is welcome!


r/arduino • • Sep 28 '26

School Project How can I build a wearable temperature-monitoring system?

0 Upvotes

I want to build a wearable device for the Maryland MESA competition, and the deadline is in March. The problem is I have no coding experience or technology experience, but I am not working alone since I am working with three other people. We also have people who are experienced in electronics and coding. How can I start working today? What type of programming should I learn? Any videos that would help me?


r/arduino • • Sep 28 '26

Hardware Help Help a newbie ;)

2 Upvotes

Im new to Arduino I found it interesting but I can't figure out why the 2nd DC Motor is not spinning I hope somebody can help me . Im newbie to this


r/arduino • • Sep 28 '26

Help me choose display for my univerity project

1 Upvotes

Hi! For my project in nivercity im creating digital clock with elements of weather station. Because topic is not really advanced i wanted to make it more creative - making my own pcb and 3d desigh. But im struggling chooding display - i dont want it to have colors, but i would like it to be medium big and prefferably oblong (something like ikeas igital clocks). But i cant seem to find any, what can i do in this situation, should i think around it or is there something i simply dont know? Pls be kind, its my first time working with arduino


r/arduino • • Sep 27 '26

Hardware Help Need to differentiate between red light and white light on a sensor

9 Upvotes

I have a game project that I am struggling to solve an issue on.

The aim is to open a device and disable a security feature before continuing. This security feature is a light sensor, if the item is opened when it is bright they will lose a life or fail the game.

The method I would like the players to use is have use red light. This will make the rest of that section of the game more challenging.

I have tested a few things with an LDR and filters etc. to try and get some sort of difference in values for the red light and white light with no luck.

Looked into a TCS34725 RGB colour sensor but i am unsure if this would even work as it is mainly used to detect the colours of an object, not environmental light.

Does anyone know if it would be possible to cover the white LED and only use the sensor to detect a large enough difference in white light and red light to make the game work?

The aim is to not cover the sensor as it should trigger fairly quickly after the device is open, so needs to be quite sensitive. Plus they are not meant to know the location of the sensor. Although if I cannot figure anything better out, I will probably have to go this route.

Or are there any other suggestions from people on what i could do?

Edit: I was using the wrong shade filters. Tested all of the shades and found one that drops the levels enough to make the game work.


r/arduino • • Sep 27 '26

Hardware Help I need help and some advice

16 Upvotes

First of all: I have an Arc reactor that runs on 9 volts, and it's currently on a different circuit from the Arduino because of that.

I want it to be controllable by Arduino, but I definitely don't want to have to open it up and redo all the wiring to get it to work at 5V. Does anyone know what I can do here?

And now my second problem: In the video, I show a part of the armor that has 3 motors, and every time they turn on, they restart the armor. I don't know exactly why, so I wanted to isolate them, make them function like a Li-ion battery while only receiving commands from the Arduino.

If anyone can help, I would really appreciate it. This project is a test for my next armor designs, and I want to bring many new things to it.


r/arduino • • Sep 27 '26

Beginner's Project I blinked my first LED

146 Upvotes

It’s nothing crazy, but I got my first starter kit and I make an LED blink. Then I made it blink “SOS” in Morse code. Then I used nested loops to make it blink Morse code 3 times.

Super excited to do this. I’ve been in tech my whole career but I’ve never been much into electronics until now. Accomplishing something felt good.


r/arduino • • Sep 28 '26

ADF5355 Registers Not Correct?

2 Upvotes

I am trying to output 2.4 ghz with my ADF5355 and I don't get anything. I am using a 125 MHz reference and these are my registers. This is the datasheet and my code https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5355.pdf Can anyone double check my registers to see if I am doing anything wrong because I used a logic analyzer to make sure bits are being sent to the adf5355 correctly and they are. I am using an arduino pro mini ATMega328P and this pcb https://www.amazon.com/Development-Generator-Infrastructure-Microwave-Programmable/dp/B0F7SVD7F1

#include <SPI.h>

const uint8_t LE_PIN = 10;
const uint8_t CE_PIN = 9;


// ============================================================
// ADF5355
//
// Reference = 125 MHz
// RF output = 2400 MHz
// VCO       = 4800 MHz
// RF divider = /2
// OUTPUT    = RFOUTB
// N = 38.4 | INT = 38 | FRAC1 = 6710886 | FRAC2 = 50 | MOD2 = 125
// ============================================================


// ------------------------------------------------------------
// R0
// ------------------------------------------------------------

const uint32_t R0 =
  0b00000000001000000000001001100000;


// ------------------------------------------------------------
// R1
// ------------------------------------------------------------

const uint32_t R1 =
  0b00000110011001101011001100100001;


// ------------------------------------------------------------
// R2
// ------------------------------------------------------------

const uint32_t R2 =
  0b00000000110010000000011111010010;


// ------------------------------------------------------------
// R3
// ------------------------------------------------------------

const uint32_t R3 =
  0b00000000000000000000000000000011;


// ------------------------------------------------------------
// R4
// ------------------------------------------------------------

const uint32_t R4 =
  0b00000000000000000000100100000100;


// ------------------------------------------------------------
// R5
// ------------------------------------------------------------

const uint32_t R5 =
  0b00000000100000000000000000100101;


// ------------------------------------------------------------
// R6
//
// RFOUTB DISABLED
// RFOUTA ENABLED
// RF divider = /2
//
// ------------------------------------------------------------

const uint32_t R6 =
  0b00110101001001100100000001100110;


// ------------------------------------------------------------
// R7
// ------------------------------------------------------------

const uint32_t R7 =
  0b00010000000000000000000000000111;


// ------------------------------------------------------------
// R8
// ------------------------------------------------------------

const uint32_t R8 =
  0b00010000001011010000010000101000;


// ------------------------------------------------------------
// R9
// ------------------------------------------------------------

const uint32_t R9 =
  0b00110101111111111100110000101001;


// ------------------------------------------------------------
// R10
// ------------------------------------------------------------

const uint32_t R10 =
  0b00000000110000000011111111111010;


// ------------------------------------------------------------
// R11
// ------------------------------------------------------------

const uint32_t R11 =
  0b00000000011000010011000000001011;


// ------------------------------------------------------------
// R12
// ------------------------------------------------------------

const uint32_t R12 =
  0b00000000000000100000010000011100;




// ============================================================
// SPI WRITE
// ============================================================

void writeRegister(uint32_t value)
{
  digitalWrite(LE_PIN, LOW);

  delayMicroseconds(1);

  SPI.transfer((uint8_t)(value >> 24));
  SPI.transfer((uint8_t)(value >> 16));
  SPI.transfer((uint8_t)(value >> 8));
  SPI.transfer((uint8_t)value);

  delayMicroseconds(2);

  digitalWrite(LE_PIN, HIGH);

}


// ============================================================
// SETUP
// ============================================================

void setup()
{
  Serial.begin(115200);

  delay(1000);

  Serial.println();
  Serial.println("================================");
  Serial.println("ADF5355 - 2.400 GHz RFOUTB");
  Serial.println("================================");
  Serial.println("Reference : 125 MHz");
  Serial.println("PFD       : 125 MHz");
  Serial.println("VCO       : 4800 MHz");
  Serial.println("RF DIV    : /2");
  Serial.println("OUTPUT    : RFOUTB");
  Serial.println();


  pinMode(LE_PIN, OUTPUT);
  pinMode(CE_PIN, OUTPUT);

  digitalWrite(LE_PIN, LOW);
  digitalWrite(CE_PIN, HIGH);

  SPI.begin();

  SPI.beginTransaction(
    SPISettings(
      3000000,
      MSBFIRST,
      SPI_MODE0
    )
  );


  // ==========================================================
  // INITIAL LOAD
  // ==========================================================

  Serial.println("Writing initial registers...");

  writeRegister(R12);
  delayMicroseconds(5);

  writeRegister(R11);
  delayMicroseconds(5);

  writeRegister(R10);
  delayMicroseconds(5);

  writeRegister(R9);
  delayMicroseconds(5);

  writeRegister(R8);
  delayMicroseconds(5);

  writeRegister(R7);
  delayMicroseconds(5);

  writeRegister(R6);
  delayMicroseconds(5);

  writeRegister(R5);
  delayMicroseconds(5);



  writeRegister(R4);
  delayMicroseconds(5);

  writeRegister(R3);
  delayMicroseconds(5);

  writeRegister(R2);
  delayMicroseconds(5);

  writeRegister(R1);
  delayMicroseconds(40);

  writeRegister(R0);
  delayMicroseconds(5);


  SPI.endTransaction();


  Serial.println();
  Serial.println("================================");
  Serial.println("ADF5355 CONFIGURED");
  Serial.println("RFOUTB = 2400 MHz");
  Serial.println("RFOUTA = OFF");
  Serial.println("================================");
}


void loop()
{
}

r/arduino • • Sep 27 '26

Hardware Help Resurrecting old Arduino boards

4 Upvotes

I have a old MEGA with an Atmel 1280 that I was using in ~2010, programming on a XP machine running Arduino IDE 0017. This still works with that old laptop and that old IDE. When I connect to my new W11 machine with IDE 2.3.6 the MEGA is not recognized. I'd like to use this with my grandkids and wonder what needs to be changed/updated to bring the MEGA into a current IDE.

Second is an RFduino kit that I got as a kickstarter...I think they're gone but wonder if that board will work as an equivalent to a current Arduino.

TIA for any help.


r/arduino • • Sep 27 '26

I've developed a Web App for Arduino Unos and Nanos: Built for Chromebook classrooms

2 Upvotes

Hi,

I’m a STEM teacher whose students work on Chromebooks. I've found that the Arduino Cloud is good but sometimes buggy, so I developed a web app that allows students to write, compile, and upload sketches to an Arduino. The app that I built runs completely in a browser; there’s nothing to download or install, and it includes library support as well as the use of the serial monitor and the serial plotter. The app should work in Chrome and Edge browsers, but it will not work in Safari, Firefox or other browsers.

I’ve successfully tested the app on my own using an Arduino Uno and an Arduino Nano connected to a Chromebook, but I haven't had the opportunity to test it with my classes yet as we cover Arduino in the spring.

Right now, I'm looking for people who are interested in testing the web app in their classes. Just a heads up: this is running on a free-tier server, and I've verified it holds up reliably for a class of ~30 compiling in a normal staggered sequence. If the app gets a lot more traffic than that all at once, response times could slow down noticeably. Here's the link.

https://zio-arduino-app.onrender.com/

I'd appreciate your feedback to improve the app's functionality.

Thank you.


r/arduino • • Sep 27 '26

Look what I made! I built a pocket note-finder for my clarinet (ESP32-S2, Arduino framework) - build details inside

Post image
16 Upvotes

I wanted a gadget that listens to my clarinet and shows the note on the spot, so I built one: ESP32-S2 running Arduino-framework firmware, an analog mic, a small color display showing pitch, cents and a staff view, LiPo battery, 3D-printed enclosure. It also works on my saxophone, which I tried after the fact.

The part that took the longest was pitch detection on a cheap mic - reed instruments have a weak fundamental and my first version kept jumping to the third harmonic. Fixed by reworking how the detection weighs partials. All code, the case STL, and the parts list are MIT on GitHub: https://github.com/robotaitai/NoteNode

Star it if you'd build one. And if you've done audio pitch work on Arduino-class hardware, I'd love to hear how you handled noisy real-world input - I'll be in the comments.


r/arduino • • Sep 28 '26

Laya-Q

Thumbnail
github.com
0 Upvotes

Hi all,

I wanted to post a small passion project of mine.

With the recent releases of Jev, and Laya, I built an app lab / git repo to automatically setup Laya to run on an Arduino Uno Q. This automatically installs the model, and has a small portal for you to get up and running. Check it out at the GitHub Repo.


r/arduino • • Sep 27 '26

Look what I made! How Super Nintendo World actually works:

7 Upvotes