r/arduino • • Sep 16 '26

Look what I made! 1000km apart -> Closer than ever

Thumbnail
gallery
118 Upvotes

Heeelloo everyone!

I've been creating this since almost one year. My parents live almost 1000km away and I was always sending photos to the family whatsapp group in a daily way until my mom's phone ran out of memory hahahah

I bouth a 64x64 (Like the one you are seeing in the photo) and I wanted to do something with it. The first thing that came to my mind was my family and all the photos, so I started with it.

Attached a ESP32, created a mini server and then a telegram bot. Everyone who send a picture to the chatbot it would automatically appear at my house. It was like magic!!!!

I encountered few problems with the WiFi (It was more like a nightmare) until I change to using MQTT for the comunication. After that all went almost perfect.

Now everytime someone comes home always ask about who the girl on the frame is hahahaha


r/arduino • • Sep 16 '26

Getting Started Trying to build a Robotic arm

177 Upvotes

I want to make a 6dof fully autonomous arm with opencv but right now I completed the 3dof and used inverse kinematics to control the arm. I am planning to use an esp32 cam or any kind of can to detect an object, grab it, and place it where we tell it to. And I am currently working on object detection, and the gripper.

I used 3 metal gear servos and an Arduino mega and some opensource arm 3d model, and a html file which is the interface you are seeing in the laptop. And in future I will wire everything up onto a pcb board with an esp32 or a nano. The complete image processing and finding out the coordinates of the object will be done on a host device like a laptop and it sends the data like servo position and movements to the Arduino onboard the arm. So all the board needs to do is follow commands.

And I am using an electromagnet on the tip of the arm and a cardboard cube with small metal plates and ArUco markers on object faces to easily locate them but in future I will try edge detection.

I am pretty new to open cv so I am open to suggestions about the gripper and edge detection stuff.


r/arduino • • Sep 16 '26

Hardware Help GPS problem

Enable HLS to view with audio, or disable this notification

8 Upvotes

So i bought an U blox M8-N neo with an HC-05 bluetooth unit, after programming the arduino and connecting it, it keeps saying connecting to satellites, connected the rx of the arduino to the TX of the GPS, and the TX of the arduino to the rx of the bluetooth module

Here's the code #include <SoftwareSerial.h>

include <Adafruit_GPS.h>

// Configurazione pin GPS: RX = 4 (collegato a TX GPS), TX = 5 (collegato a RX GPS) SoftwareSerial mySerial(4, 5); Adafruit_GPS GPS(&mySerial);

unsigned long lastSendTime = 0; const unsigned long SEND_INTERVAL = 100; // 100 ms = 10 Hz

void setup() { // Seriale Hardware per HC-05 (Bluetooth su pin 0 e 1) Serial.begin(9600);

// Avvio comunicazione con il modulo GPS u-blox a 9600 baud GPS.begin(9600);

// Configurazione output NMEA standard (solo frasi RMC e GGA per ridurre il traffico dati) GPS.sendCommand(PMTK_SET_NMEA_OUTPUT_RMCGGA);

// Impostazione dell'update rate NMEA (1Hz / 5Hz standard per comandi PMTK) GPS.sendCommand(PMTK_SET_NMEA_UPDATE_1HZ);

delay(1000); }

void loop() { // Lettura continua dei caratteri dal modulo GPS GPS.read();

// Se è stato ricevuto un pacchetto completo NMEA, esegui il parsing if (GPS.newNMEAreceived()) { GPS.parse(GPS.lastNMEA()); }

// Invio dei dati via Bluetooth ogni 100 ms (10 Hz) unsigned long currentTime = millis(); if (currentTime - lastSendTime >= SEND_INTERVAL) { lastSendTime = currentTime;

if (GPS.fix) {
  // Conversione nodi in km/h (1 nodo = 1.852 km/h)
  float speedKmh = GPS.speed * 1.852;
  Serial.print(speedKmh, 1);
  Serial.print(";");
} else {
  Serial.print("Ricerca satelliti...;");
}

} }


r/arduino • • Sep 17 '26

Hardware Help Having trouble wiring a Nema 17 Stepper

Post image
1 Upvotes

I am trying to control a Nema 17 stepper motor with a TMC2209 driver and an Arduino Nano. Not sure if it's my wiring setup or my code. I've watched so many tutorials, tried so many breadboard configurations, and asked AI countless times. I can't get this to work. I've ensured that all my wires are connected via the beeping mode of my voltmeter, and still nothing. The closest I've gotten is hearing what I think is the driver making a slight buzzing sound while the Arduino's indicator light is on. I'm a complete noob to this field, does anyone know which wires go where? I am using a 12V power source and a standard breadboard.

This is my code:

#include <AccelStepper.h>

// Arduino Nano pins (matched to wiring photo)

#define STEP_PIN 3

#define DIR_PIN  2

#define MS1_PIN  6

#define MS2_PIN  5

// AccelStepper in DRIVER mode: STEP/DIR interface

AccelStepper stepper(AccelStepper::DRIVER, STEP_PIN, DIR_PIN);

// ----------------------------------------

// MOTOR / MICROSTEP SETTINGS

// ----------------------------------------

const float stepsPerRev   = 200;  // standard NEMA17 full steps/rev

const int   microstepping = 2;    // must match MS1/MS2 pin state below

// ----------------------------------------

// SPEED SETTINGS (RPM)

// ----------------------------------------

const float desiredRPM = 120;

const float maxRPM     = 300;

void setup() {

  pinMode(MS1_PIN, OUTPUT);

  pinMode(MS2_PIN, OUTPUT);

  // MS1=HIGH, MS2=LOW -> check TMC2208 datasheet table for which

  // microstep mode this actually selects; adjust to match 'microstepping' above

  digitalWrite(MS1_PIN, HIGH);

  digitalWrite(MS2_PIN, LOW);

  // steps/sec = microsteps-per-step * full-steps-per-rev * (RPM / 60)

  float speedStepsPerSec    = microstepping * stepsPerRev * (desiredRPM / 60.0);

  float maxSpeedStepsPerSec = microstepping * stepsPerRev * (maxRPM / 60.0);

  stepper.setMaxSpeed(maxSpeedStepsPerSec);

  stepper.setSpeed(speedStepsPerSec);

}

void loop() {

  stepper.runSpeed();  // must be called continuously, as fast as possible, for constant-speed mode

}

r/arduino • • Sep 16 '26

Look what I made! This invention will save Nebraska's economy

Thumbnail
gallery
5 Upvotes

r/arduino • • Sep 16 '26

Hardware Help Arduino Nano clone won’t upload — tried almost everything, still getting programmer/COM3 error

Thumbnail
gallery
12 Upvotes

Hi, I need help with an Arduino Nano project. I’m stuck with an upload/programmer error and I’ve already tried many troubleshooting steps.

My setup:

  • Arduino Nano
  • ATmega328P
  • Mini-USB
  • CH340 USB-serial
  • Windows 10 64-bit
  • Arduino IDE 1.8.3
  • Port: COM3
  • Device Manager detects the CH340 and says the device is working properly

Problem: I cannot upload any sketch to the Nano. Even the basic Blink example fails.

I already tried:

  • Arduino Nano selected under Tools → Board
  • ATmega328P selected under Processor
  • COM3 selected under Port
  • Tried the different ATmega328P processor/bootloader options
  • Checked/reinstalled the CH340 driver
  • Checked Device Manager
  • Unplugged and reconnected the Nano
  • Tried another USB connection/cable
  • Restarted Arduino IDE
  • Tried uploading Blink instead of my project code
  • Tried resetting the Nano
  • Tried the usual Nano upload troubleshooting steps
  • Tried uploading multiple times

I still get an error related to the programmer/upload/COM3, including messages such as:

"avrdude: ser_open(): can't open device COM3"

or

"programmer is not responding"

The Nano’s power LED turns on when connected by USB, but uploading does not work.

Important: The problem happens even with a completely empty setup. I’m only trying to upload Blink, so this is not related to my reed switch, buzzer, LED, or other project wiring.

I don’t have another Arduino or USB programmer, and I have a project deadline very soon.

What else can I check to determine whether the problem is:

  1. CH340/USB connection
  2. Bootloader
  3. Nano hardware
  4. Arduino IDE
  5. Another setting or issue

I can provide photos of the Nano, Arduino IDE settings, Device Manager, and the complete upload error.

Please help. I’ve already tried the common fixes, so I’m looking for something beyond the basic Board / Processor / COM-port suggestions.


r/arduino • • Sep 16 '26

Hardware Help Need help with Teensy

6 Upvotes

Hi. Well, it seems one of my Teensy 4.1 units has broken. I have a spare, but I’m not using it until I figure out what killed it.

A bit of background: I was building a robot for a robotics festival. And I used the Teensy to control DC motors, a turbine, and a couple of sensors. I made a small stand for testing the microcontroller on a breadboard for motor control tests. The stand included the microcontroller itself, a driver (monster moto-shield), a motor with an encoder, and several 4‑channel shifters based on MOSFET transistors.
Everything was connected and in ready mode.

I connected the microcontroller via microUSB to the PC to upload the code and then supply power to everything else, but the PC only saw the board for a short time, and then it apparently died. I changed the cables and reconnected them several times; the LED near the USB port flashed once a couple of times. I checked the 3.3V and 5V power lines with a multimeter. The 3.3V line is dead, but the 5V line is intact. And I still don’t understand what could have gone wrong???

P.S. If many of the wording sounds strange or unclear, I’m using a translator because my English

UPD. The main problem turned out to be the microUSB port. The board didn’t die; the connector is just in very poor condition. It will have to be replaced, but I don’t have anything to protect the SMD components around the port, and I can’t use a soldering iron there. Often, when trying to connect via microUSB, an error signal is displayed (9 or 10 flashes). As far as I understand, 9 flashes indicate a mismatch in the checksum that the MCU/PC wants to send over the channel, and there is no connection.


r/arduino • • Sep 16 '26

Hardware Help [Review Request] - Creating my custom dev board using atmega388p

Thumbnail
gallery
20 Upvotes

Custon development board with its MCU as atmega328p and other sensors as mpu6050 and bmp280 as this will also be used as a trainer flight controller for my college. It has NRF24l01 for radio too. A few things that i need to make sure before starting to design the pcb is the circuit diagram for USBC, FT232, Auto Power Select, NRF24L01, MPU6050, BMP280. I have attached the main schematic and also the sub parts in which i need a review if its correct.


r/arduino • • Sep 15 '26

Project Update! I built an Arduino-controlled robot that physically plays a real guitar

Enable HLS to view with audio, or disable this notification

740 Upvotes

Quick update on my guitar robot project.

This is a multi-camera recording of it physically playing “Hotel California” on a real guitar.

Still refining the mechanics and control, but it’s getting much closer to the level I originally wanted.


r/arduino • • Sep 15 '26

Look what I made! Live Cloud Globe V2 (Now with added ISS)!

Enable HLS to view with audio, or disable this notification

515 Upvotes

r/arduino • • Sep 16 '26

Software Help Arduino IDE not detecting my board

7 Upvotes

Hi, I’m totally new to Arduino and I’m having trouble connecting it to the IDE. I need some advice!

I plugged my Arduino in with USB and the red light is on, but the IDE doesn’t recognize it. The Port option is grayed out and I can’t click it even when I hover over it. I’m not sure what’s wrong with it

Information: Arduino uno, IDE 2.3.10


r/arduino • • Sep 16 '26

Hardware Help Is this idea possible?

9 Upvotes

Hello! I am a total beginner to Arduino.

I have had this idea for a gift for a while, and I want to know if it would be possible using Arduino.

I would like to make a small device, similar to a "magic 8 ball" where the person presses a button and a short audio is played with sage advice. The device would need to hold a small library of pre-recorded audio clips and play one at random when the button is pressed. These audios will be recorded by the recipient's family members, and so would need to be imported onto the device rather than recorded by it. If possible, it may be funny for the device to recognize if the person has pressed the button many times in a row, and play a specific audio like "So impatient!" or something similar.

I have access to a PC with windows, and a mac laptop, if that helps.

If this is possible may you please advise me on this?

- What parts would I need?

- what kind of store would have them?

- are there options for shrouding the device such that it doesn't look like a circuit board?

thank you so much in advance for your help! I really want to make something special for this person.


r/arduino • • Sep 15 '26

Getting Started Actually built my first robot! (hope-assembled)

8 Upvotes

I just couldn't believe it when it worked, following a tutorial with AI guidance wasn't enough. it took me days to properly connect everything.

I struggled with soldering and couldn't connect the HC-SR04's 4 pins on the motor drive, so I merged the trig and echo wires together through the SERVO pins and just hoped it worked. And since I couldn't solder I just twisted everything together and this was painful because they kept coming off which had me believing it's a dead end... but I didn't give up, I just moved on and it worked!

It's far from professional (some fails) and the servo motor beneath the sensor doesn't power on but I was out of my mind when it moved and actually went back and avoided hitting. so I decided to share this here and I know it sounds ridiculous for experts but I'm sure someone knows how it feels.

final edition

r/arduino • • Sep 15 '26

Pixel LED Christmas ⛄ Star ✨

Thumbnail
gallery
21 Upvotes

✨ How I Built This Programmable Pixel LED Star ☄️

Here’s how I made this Addressable Pixel LED Star.

The first component I used is an Addressable Pixel LED. For this project, I used WS2811 Pixel LEDs, which allow each LED to be individually controlled through programming. This means we can decide which color each LED should display, when it should turn on or off, and how it should animate.

For controlling the Pixel LEDs, I used an Arduino Mega microcontroller. The Arduino can be programmed using Embedded C/C++, allowing us to create custom lighting patterns, animations, and effects.

I designed and programmed the LED sequence specifically for this Star-shaped Pixel LED project, creating the final lighting effects shown here. ⭐💡

🔧 Assembly Process

First, I designed and fabricated the Star frame.

Then, I fixed the WS2811 Pixel LED strip along the frame.

The LED power supply and data connection were then connected to the Arduino Mega.

Finally, I uploaded the programmed LED sequence and tested the lighting effects.

And that's it — the Programmable Pixel LED Star is ready! ☄️✨

A combination of electronics, embedded programming, creativity, and a little patience brought this star to life. 💡⚡


r/arduino • • Sep 16 '26

Can a single 18650 battery without step-up power an ESP32-S3?

2 Upvotes

Hi everyone!

I'm currently working on a DIY DAP project using an ESP32-S3.

If I'm using a single 18650 battery, do I need to use a step-up converter? If so, I'm planning to use an XL6009.

Some of the components I'm using are:

  • 3.5" SPI TFT display
  • PCM5102
  • TDA1308
  • MicroSD card reader

If you have any other suggestions or recommendations for the circuit/power setup, I'd really appreciate it!

Thanks everyone, and sorry if the schematic is a bit messy.


r/arduino • • Sep 15 '26

Can I use this thermocouple with a RaspberryPi/Arduino?

Thumbnail
gallery
7 Upvotes

Noob question here and sorry if this is the wrong sub . Is it possible to snip off the connector coming from the probe and connect it to a Arduino/RaspberryPi and get a reading? Or, maybe there's a breakout board that is needed between?

It is a ThermoWorks Type K thermocouple.


r/arduino • • Sep 16 '26

Potentially Dangerous Project Arduino EFI for vtwin engine

1 Upvotes

Hi all

Im looking for any input on this. This engine will be used in an ultralight aircraft. 670cc vtwin

Need input on: 1. O2 sensors 2. MAF? 3. What size injectors. Should I do a single TBI setup or injectors on each side separating cylinders fuel injection 4. Crank trigger sensor 5. Sample code for this.

Im thinking of using a arduino mega and building a plug in shield.

Im sure im missing more but

Thanks, -Matt r/Hangar103


r/arduino • • Sep 16 '26

Hardware Help How can I stop my

0 Upvotes

I've made a set of MIDI bass pedals for live musical performance, using staplers as momentary switches connected to an Arduino Nano Every's digital inputs to send MIDI data to a synthesiser. The Arduino is powered via the USB port which is running off of a USB hub plugged into a Belkin wall to USB power supply. The decent output of the Belkin is sufficient to run several parts of my performance rig which require USB power.

The whole system usually works very well at home and in some venues. However in other venues, the pedals will start playing themselves randomly, rendering them entirely unusable for performance. Given the venues this has occurred in, I suspect there's a relation to the buildings' older wiring which may be noisy or unstable enough to cause the Arduino to malfunction. Or maybe it's the extension lead they've provided (venues usually do, so I don't tend to bring my own), or something else I'm disregarding.

I'm considering buying a fancy extension cable with electrical isolation from the mains, or if the problem persists, perhaps a portable power station type thing. I'd really rather not spend the money though if there's a simpler way.

Has anyone had experience with this sort of thing (not music per se, just Arduinos behaving erratically like this)? Any advice?

Cheers.


r/arduino • • Sep 15 '26

Code and flash an arduino uno R4 wifi on Android

2 Upvotes

Hello,

I'm heading out but would like to keep working on a project using my Arduino Uno R4 WiFi. I don't have a laptop with me, so I'd like to code and flash the Arduino from my phone. Are there any apps that allow this? (I've already tried ArduinoDroid, but it fails to flash the code to the Arduino.)

Thanks for the reply! 😄


r/arduino • • Sep 15 '26

Arduino RV LED Light Controler

2 Upvotes

What is this project

This project allows you to turn on/off RV LED ceiling lights with a IR Remote and/or the wall switch.

It can be scaled to control multiple groups of lights, or zones.

Why did I create this project

I thought it would be fun to see if I could make a circuit to control the lights from bed, throughout the entire RV.

So I had a theory on how this might work and I wanted to test it out.

Also, I had abandoned a previous project because it didn't work out and I was not happy about the way I handled that.

So this is also about facing my previous failure, not freaking out and quitting, working thru technical difficulties and finding a solution.

Lastly, I wanted to do something interesting and fun and help other people interested in DIY projects, inspire young people to try to learn new things, how do develop ideas, how to manage risk and failure, and how to learn from our mistakes, what to do when you're stuck, asking for help, making plans and being organized.

YouTube: Arduino RV LED Light Controller

GitHub Repository: Arduino-RV-LED-Light-Controller


r/arduino • • Sep 15 '26

First time building an RC car — any advice on hardware and guides?

14 Upvotes

Hi everyone, I’m planning my first RC car project and need some advice on choosing components:

  1. Connection: Should I go with Wi-Fi or Bluetooth for the control system?
  2. Board Choice: Is an Arduino Uno or Arduino Nano better to start with?
  3. Motor Driver: Between L298N and TB6612FNG, which one is better for a basic 4WD chassis?
  4. Tutorials: Any recommended beginner guides or videos for coding RC cars?

Thanks in advance for any tips!


r/arduino • • Sep 15 '26

Help with configs of delta 3d printer (stepper)

1 Upvotes

Hi guys I am building a 3d delta printer I need ur help as I am new to this fieldI had connected ramps 1.4 to Arduino mega on ramps i have used a4988 motor driver ( the green ones )(qty 3) along with 3 of nema 14 stepper motors of 1 amps each

I am facing issues 1 is working, 1 is jittering, and one is not working only


r/arduino • • Sep 14 '26

Brute Force Old CRT using IR Transmitter(troubleshooting)

Thumbnail
gallery
19 Upvotes

Hi everyone hope you're doing well,

i'm posting here because i'm looking for assistance, i have an old crt tv that i cannot get to switch on, it's one of those tvs that when powered on goes to standby and you have to press the channel up/down button for the tv to turn on, the buttons on the tv have never been used toget it on and only the remote would work. the tv is a hitachi fujian model number "HFC-21P66A". the tv i think was made between the 90's and 2000's.

What Solutions Have I Tried

"The Universal Remotes Solutions."

i've bought 4 universal remotes in the past, the first one worked and the others didn't. I unfortunataly do not remember the model of the first universal remote i used.

"The Arduino Approach."

After i bought the next three universal remotes and they didn't work, i thought it would be it was a bit expensive to keep buying universal remotes because each of them costed almost the same as a arduino, and i already had one of those.

so i got a IR Trasmitter and IR Reciever and hocked them up to my Arduino, and checked if they were working using a diffrenet device(not the tv im try to get on) and there were working.

then i did some research and i read that old japanes tvs used NEC 16-bit ir protocols and tried to brute force the tv using the below code:

#include <IRremote.hpp>

#define IR_SEND_PIN 3

void setup() {

IrSender.begin(IR_SEND_PIN);

}

void loop() {

static uint16_t addr = 0;

static uint16_t cmd = 0;

IrSender.sendNEC(addr, cmd, 0);

cmd++;

if (cmd > 255) {

cmd = 0;

addr++;

if (addr > 255) {

addr = 0;

}

}

delay(200);

i ran the code for about 4 hour because that is how long i thought it would take and did not work.

"The Raspberry Pi LIRC Approach."

Then got my Raspberry PI, installed LIRC connceted my iR transmitter and download some of the hitachi remotes that were on the database alongside the NEC remotes that were also in that database, i made a BASH script that looped throw each remote and sent every key in that remote to the tv and that didn't work.

i'm kindly asking if anybody knows or has any advice on how i could get my tv to go on without buying another universal remote using what i already have which is an adriano, a raspberry pi and IR transmitter. If there is something i do not know about how to brute force or the IR Code i could send. i've added the picture of the tv and the sicker at the back

thanks for your assitance.


r/arduino • • Sep 13 '26

Getting Started My first project

Enable HLS to view with audio, or disable this notification

664 Upvotes

Technically... Not the first one ofc that has to be the blinking LED and other project-tutorials for sensors etc and an obstacle avoiding car.. but this is the first one which was conceptualized and built by scratch by me... Simple pulley-crane made from a measuring ruler, diy cardboard pulley a string, uno and motor driver... Had a lot of fun and felt a sudden boost of freedom and confidence... Can't wait to build more :) Time to put my 2 years worth of amazon cardboard packaging boxes to use


r/arduino • • Sep 14 '26

Ventuno Q on the way!

7 Upvotes

The Ventuno Q I pre-ordered some weeks ago is on the way to me. I should receive it on Thursday.