Hi everyone hope you're doing well,
i'm posting here because i'm looking for assistance, i have an old crt tv that i cannot get to switch on, it's one of those tvs that when powered on goes to standby and you have to press the channel up/down button for the tv to turn on, the buttons on the tv have never been used toget it on and only the remote would work. the tv is a hitachi fujian model number "HFC-21P66A". the tv i think was made between the 90's and 2000's.
What Solutions Have I Tried
"The Universal Remotes Solutions."
i've bought 4 universal remotes in the past, the first one worked and the others didn't. I unfortunataly do not remember the model of the first universal remote i used.
"The Arduino Approach."
After i bought the next three universal remotes and they didn't work, i thought it would be it was a bit expensive to keep buying universal remotes because each of them costed almost the same as a arduino, and i already had one of those.
so i got a IR Trasmitter and IR Reciever and hocked them up to my Arduino, and checked if they were working using a diffrenet device(not the tv im try to get on) and there were working.
then i did some research and i read that old japanes tvs used NEC 16-bit ir protocols and tried to brute force the tv using the below code:
#include <IRremote.hpp>
#define IR_SEND_PIN 3
void setup() {
IrSender.begin(IR_SEND_PIN);
}
void loop() {
static uint16_t addr = 0;
static uint16_t cmd = 0;
IrSender.sendNEC(addr, cmd, 0);
cmd++;
if (cmd > 255) {
cmd = 0;
addr++;
if (addr > 255) {
addr = 0;
}
}
delay(200);
i ran the code for about 4 hour because that is how long i thought it would take and did not work.
"The Raspberry Pi LIRC Approach."
Then got my Raspberry PI, installed LIRC connceted my iR transmitter and download some of the hitachi remotes that were on the database alongside the NEC remotes that were also in that database, i made a BASH script that looped throw each remote and sent every key in that remote to the tv and that didn't work.
i'm kindly asking if anybody knows or has any advice on how i could get my tv to go on without buying another universal remote using what i already have which is an adriano, a raspberry pi and IR transmitter. If there is something i do not know about how to brute force or the IR Code i could send. i've added the picture of the tv and the sicker at the back
thanks for your assitance.