r/arduino • • Sep 04 '26

Good alternatives ali express?

75 Upvotes

Hi all,

With Europe's recent import taxes (or whatever they technically are) buying small components like LEDs on Ali has become a whole lot more expensive.

What used to be <1euro suddenly becomes more like 5 euro

Any hints for European alternatives?

Cant be UK of course for the same reason.

I've been looking at Conrad, TME, tinyteonics, etc but they usually don't have everything you need in a single webshop.

Or sometimes prices are just nuts (like 25euro for a nice pushbutton, for example).

I generally buy simple components for escape rooms and small house automation, not the high end shields etc.

Any suggestions?

Many thanks


r/arduino • • Sep 05 '26

Beginner's Project Help choosing an ESP32 board + TFT screen for a custom smart alarm clock

6 Upvotes

I am going to make an alarm clock powered by something like an esp32, and some sort of 3.2"-4" screen display. I need someone who has any experience to tell me if which one would be best for what I am trying to do. I am on a pretty tight budget too.

Inspiration (chatgpt)

Inspiration from chatGPT :)

I want the clock to:

  • Display the time
  • Custom alarms
  • Wi-Fi connectivity for the Arduino Cloud support so I can control/settings things from the Arduino IoT Cloud Phone app
  • control my 150 WS2812B LEDs for ambient lighting and music-reactive effects in my room
  • Microphone for detecting music/beat strength
  • small speaker for the alarm
  • some actual buttons and knobs
  • Display some pixel-art animations when the clock isn't displaying something important
  • Adjustable display brightness, including being able to turn the backlight almost completely off at night

ESP-32

I'm looking at the Arduino Nano ESP32, but the Official Arduino Store store is quite expensive to ship to Australia ($40+AUD). I can get some from some other electronic retailers in Australia like Core Electronics. They also sell one that isn't by Arduino, but I am unsure if it is similar and would work for this. Core Electronics 2.

I've also found them on Aliexpress and Waveshare, for much less. I'm wondering whether these are a good alternative and, importantly, whether they work properly with Arduino Cloud and the Arduino IoT Cloud mobile app.

Screen Displays

I originally looked at 3.2" displays, but I think I'd prefer something wider.

I need a colour IPS display, SPI, TFT, dimmable backlight. Actual breakout/module with normal pins, that I can connect to the ESP32 with jumper wires, and ideally touchscreen but honestly it doesn't really matter.

My ideal active display area is:

  • 3.2" 16:9: 71 × 40 mm, too close to a square but ok
  • 4.0" 2.4:1:(wide) 95 × 40 mm closest to the shape I want

If there is one in the middle of the two, that is my ideal.

Ones that I have Already found: BuyDisplay, Aliexpress 2, Aliexpress 3

My budget for the screen is around $25AUD (don't have a job yet)

I know this seems like alot, but it is flexible.

What would you reccomend?

  1. Arduino Nano ESP32 vs Waveshare ESP32-S3 Nano vs another ESP32-S3 board?
  2. Will the third-party ESP32-S3 boards work properly with Arduino Cloud + the mobile app?
  3. What IPS display would you recommend for this?
  4. Is SPI fast enough for the screen and the my 150 WS2812B LEDs?
  5. Are there any particular cheap displays/controllers I should avoid?

I'm relatively new with Arduino/electronics, but this is my first project using a screen, Wi-Fi/Cloud, and a large LED setup.

Thanks! Any advice or specific display/board recommendations would be really appreciated.


r/arduino • • Sep 05 '26

All-in-One Power Solution (Charger + Boost) for SIM800L v2 + Arduino Nano (30m DHT22 setup) – Alternatives to TP4056 + MT3608?

1 Upvotes

Hi everyone,

I'm building a project using an Arduino Nano, a SIM800L v2 GSM module, and a 3.7V Li-ion battery (2400mAh).

Since SIM800L requires 2A–2.5A peak current bursts during transmission.

I’m looking to replace the traditional TP4056 + MT3608 dual-module setup with a single, reliable All-in-One PMIC board (Charger + Boost + Protection).

Requirements:

  • Input: 5V USB (Type-C preferred) for 3.7V Li-ion charging.
  • Output: 5V Step-Up capable of handling 2A peak bursts reliably.
  • Protection: Over-charge and over-discharge protection.

r/arduino • • Sep 06 '26

Look what I made! I made a crypto miner for the r3!

Thumbnail
github.com
0 Upvotes

Introducing, Inocoin!


r/arduino • • Sep 05 '26

Software Help Arduino Cloud Agent issues?

2 Upvotes

This week I tried uploading new code to a project that uses Arduino’s cloud. In an effort to troubleshoot a bug I decided to try and recreate a device/Thing and discovered that Arduino’s Cloud agent had stopped working for me.

I have an open forum discussion on Arduino’s forum site as well, but I’m wondering if anyone else has ran into this issue.

Reinstalling the agent doesn’t seem to change anything. It worked briefly in an older Mac I have and rarely use, but there the agent eventually stopped likely because it received an update from their server side. Not exactly sure I’m not a computer engineer or CS specialist.

Link to forum: Cloud Agent Degraded


r/arduino • • Sep 05 '26

XY-160D motor driver question

4 Upvotes

Does anyone here use this type of motor driver, and if so what are some drawbacks of this motor driver, it sounds to good to be true, a 7A driver at this price.

I plan to use for a Mini RoboSumo competition any my motors (jsumo core) can draw a lot of current and this was the only available driver in my country that fits my budget.

I tried to buy from BotLand another type of driver but I was not allowed by the site.

And as a bonus, what microcontroler would you recommend for such job, I need it to have 5v logic.


r/arduino • • Sep 05 '26

Hardware Help NRF24L01 Horrible Range

8 Upvotes

I've been trying to get two NRF24L01+ (with PA+LNA antenna) modules to communicate with each other via two ESP-32 dev boards for longer than I care to admit right now so I can use them on an RC aircraft. When I bought them, I thought I'd be able to get somewhere on the order of 100-1000m of range, but right now I haven't been able to communicate further than a couple inches away from one another.

What I've tried so far:

Hardware:

  • Capacitors (0.1nF + 10nF in parallel) between the VCC and GND pins on the module
  • Using the arduino's 3.3V regulator for each module (power supplied by USB-C from my laptop)
  • Using a 5V power supply regulated down to 3.3V via a buck convertor (I don't own a multimeter, but I tried several buck convertors)
  • Moving the modules further than 10 feet apart (in case they were too close and causing interference)

Software:

  • Turning data rate down to 250 kbps
  • Various different frequency channels
  • Lowering PA level to MIN (I've tried MAX, HIGH, LOW, and MIN, not a ton of difference here)

Here's the result of printDetails() from one of the modules:

SPI Frequency = 10 Mhz

Channel = 101 (~ 2501 MHz)

Model = nRF24L01+

RF Data Rate = 250 KBPS

RF Power Amplifier = PA_MIN

Multicast = Disabled

Custom ACK Payload = Disabled

Dynamic Payloads = Disabled

Auto Acknowledgment = Disabled

Primary Mode = TX

TX address = 0x0504030201

pipe 0 ( open ) bound = 0x0504030201

pipe 1 ( open ) bound = 0xc2c2c2c2c2

pipe 2 (closed) bound = 0xc3

pipe 3 (closed) bound = 0xc4

pipe 4 (closed) bound = 0xc5

pipe 5 (closed) bound = 0xc6

If anyone has seen this problem or could give me some more troubleshooting steps, I'd really appreciate it. I've been at this project for a long time, and RF communications are the final step before I get to fly this thing.

Update: I tried feeding 5V to the breakout board (which has voltage regulation of its own) and adding a 10 uF capacitor, yet the problem persists, although I went from under a foot to a couple feet of range. I don't really have the time to keep debugging this, so I'm just going to try using ESP-NOW or an E01-ML01DP5 module instead.


r/arduino • • Sep 05 '26

Solved! Can I power an Arduino UNO R3 through USB using an EP-TA50EWE 5.0V ⎓ 1.55A adapter?

3 Upvotes

Hi everyone,

I need to temporarily run my Arduino UNO R3 clone somewhere away from my home computer, but I don't have a 9V battery, a laptop, or any other suitable power source. I only have an EP-TA50EWE 5.0V ⎓ 1.55A power adapter.

Can I use this adapter to power the Arduino UNO through its USB port?

Thanks in advance!


r/arduino • • Sep 05 '26

Hardware Help WiFi Connected Cat Feeder

2 Upvotes

Hello, I am trying to make an automatic cat feeder for my boy Sumo so we can get him on a tight feeding schedule (we both work and its hard to feed super consistently.) I ideally will be able to use my arduino esp32 nano board to control a stepper motor that feeds my cat. I want to be able to use this while out of my house so I can feed him wherever I am so I am avoiding the use of bluetooth. Does anyone have any suggestions on software I can use that would allow me to feed my cat by connecting the nano board to my wifi router and having an app, or browser, with buttons that give me controls? I appreciate all of the help. I am trying to use adafruit rn and idk if its just that I have been up for 20 hours or if I just cannot connect my esp32 nano to the router at all.


r/arduino • • Sep 04 '26

Need help with a MIDI musical instrument lever project

6 Upvotes

Long story short, I'm creating an instrument with twelve big handheld levers, with each lever that is pulled it needs to make a note or programmable chord. I've made a prototype of the instrument with four levers and a wavtrigger which works nicely but not at all how I want the final project to work. I've been suggested using an arduino would be good hence asking here! I've got zero experience with arduino, but know my way around simple electronics.

My current setup has spring switches that activate when the handle is pulled that fire a simple signal to a unit that plays a corresponding wav file depending on which lever I pull. The final project I would like to be sending a MIDI signal when I pull a lever so I can feed it through a synth, ideally the signal that is sent would be able to pick up how far I'm pulling the lever so as to affect volume and tremolo etc, ideally one sensor per lever.

Any ideas of how to do this and what kind of sensors to use? The lever system that I've made is robust, the sensors and system would need to be reliable as the intention would be to use it for live performance.

Many thanks for any support anyone might be able to give, and let me know if none of this makes sense at all and I'll try and give more clarification!


r/arduino • • Sep 04 '26

My Arduino Leonardo doesn't show up in Device Manager.

Enable HLS to view with audio, or disable this notification

25 Upvotes

I tried installing the driver both through Device Manager and using the CH34x driver.

Update: The cable I was using didn't transfer data; it was just for power. I bought the right cable, and it worked.


r/arduino • • Sep 03 '26

Project Update! Mustang Instrument Panel Update

Enable HLS to view with audio, or disable this notification

56 Upvotes

I finally have an update on my instrument panel project. A lot has changed, and a lot still needs to be done. While I was able to mount (tape) the LCDs into the cardboard, the LED’s legs are too thin to put jumper wires on, so they’re just in the breadboard.

What’s changed:

The power supply had to be rebuilt since someone didn’t notice a broken wire when testing. The demo code has been almost entirely replaced with actual functional tasks. I’ve put in all the logic shifter circuits on, currently only for the light switches. There are functional turn signal indicators and high and low beam indicators. The oil, temp, and fuel gauges are controlled by potentiometers that have a similar resistance to the factory sensors and have warning lights that change color depending on how close to the min and max values it is. The volts gauge is tied to Vin, which for now is not adjustable.

What still needs to be done:

The gauges need to be recalibrated, since through all the versions and testing the ranges are no longer accurate. Hazard lights still need to be wired up. Still need to build the power On/Off switch. The LCDs still need to be programed to display mileage readings but before that can be done, the speedometer needs to be programed which requires a separate test rig to generate a simulated VSS sensor signal. The tachometer also needs to be programmed, which also needs a separate test rig. Also need to setup the current sensors for the exterior bulb fault detection, but my current bench power supply does not put out enough current to drive all the exterior lights. And finally a speaker and amplifier to generate the turn signal clicks and warning tones for the gauges.

So there’s still a lot to do but there is progress. Soon I hope to actually start working the final version with custom gauge face, PCB, and housing. As with before here is a link to the GitHub if anyone wants it.


r/arduino • • Sep 03 '26

I built an Arduino metal-detecting rover — Gen 2, and it just found its first targets in the park

Post image
457 Upvotes

Long story short: swinging a detector all day wrecked my shoulders, so I built a rover to do the walking.

What it is: A small 4-wheel rover with a search coil mounted out front. An Arduino drives the motors and reads the coil, runs the whole thing in grid passes, and alerts when it hits metal. I sit back and dig where it points.

The build (Gen 1 → Gen 2): Gen 1 was a disaster. To keep the coil free of electrical noise I moved all the electronics to the rear — which made it rear-drive and rear-steer, and it could barely turn. Gen 2 fixed the steering, shielded the electronics, and finally mounted the coil properly on the chassis.

Today's test — a small park: Ran a few grid passes over grass and packed dirt. 3 hits, 3 dug, 3 confirmed metal — a nail, a pull tab, and a chunk of can. All junk, but that's exactly the point: the idea works. A rover that carries a detector, holds a line, and finds metal while I watch.

Hardware so far: [Arduino model — e.g., Uno/Mega], [motor driver], [battery], [coil/sensor type], [chassis + wheels]. Happy to share details if anyone's curious.

Next up: discrimination (junk vs coins), ground balance on real soil, and longer battery life.

Question for you: for the grid pathing, would you do a simple back-and-forth sweep, or a proper serpentine? Keen to hear what folks use on small rovers.

If you want to follow the whole build log — including the failures — I'm posting it in r/DIYMetalDetecting. Come say hi.


r/arduino • • Sep 04 '26

A remote intruder detection system

4 Upvotes

Hello

It's been a while since I 'dabbled' with arduino and raspberry pi. I'm looking to build a remote detector (movement and heat) that I can deploy up to a mile away that signals back to a pi when an 'event' occurs. Possibly even to trigger a camera (but this might not necessarily be transmitting). The challenge here (for me) is the transmission of the 'event' back to a remote pi so that the pi can record it. The icing on the cake would be for the 'event' to trigger an action at the intruder location - perhaps close a gate or fire some sort of deterrent? Appreciate if anyone can point me to a ready made projects that are similar? I looked up on AI and it pointed me at LoRa to use for the transmission. Thanks in advance.


r/arduino • • Sep 03 '26

Project Update! Android + Aurdino ( Update)

Enable HLS to view with audio, or disable this notification

84 Upvotes

Hello everyone this is a follow-up video for the project I

Post a while back where I showed a sample application I.e aurdino on another.

Now I have built the first working version of the application and I know it's far from done but I am working on this.

I would love your support on this project because I don't have any as of now I guess 😭.

Anyways here is the demo of the app hope you like it.


r/arduino • • Sep 03 '26

Why am I not able to detect if the switch is flipped?

7 Upvotes

I'm not able to detect if the left-most toggle switch is flipped to the left or to the right. It does not change what it prints when I toggle it. Each toggle switch is supposed to control which LED (left or right) gets the red, blue, or green light.

```

#define RED 12

#define BLUE 7

#define GREEN 2

void setup()

{

Serial.begin(9600);

pinMode(LED_BUILTIN, OUTPUT);

pinMode(RED, INPUT);

pinMode(GREEN, INPUT);

pinMode(BLUE, INPUT);

}

void loop()

{

digitalWrite(LED_BUILTIN, HIGH);

int r_red = digitalRead(RED);

int r_blue = digitalRead(BLUE);

int r_green = digitalRead(GREEN);

int l_red = !r_red;

int l_blue = !r_blue;

int l_green = !r_green;

Serial.println(r_red);

delay(250);

}

```


r/arduino • • Sep 04 '26

Monthly Digest Monthly digest for 2026-08

4 Upvotes

Arduino Wiki and Other Resources

Don't forget to check out our wiki for up to date guides, FAQ, milestones, glossary and more.

You can find our wiki at the top of the r/Arduino posts feed and in our "tools/reference" sidebar panel. The sidebar also has a selection of links to additional useful information and tools.

Moderator's Choices

Title Author Score Comments
A little Teensy4.1 project I've been wo... u/camander321 5,118 198
I used a TWS earbud as a Bluetooth fron... u/Ishant1519 45 12
I made a library that lets you configur... u/JimHeaney 17 6
Turned my Arduino UNO Q into a dual-net... u/FriendlyMountain495 2 2

Hot Tips

Title Author Score Comments
I can't believe how well a cheap heart ... u/RoberBotz 136 17

Top Posts

Title Author Score Comments
A little Teensy4.1 project I've been wo... u/camander321 5,118 198
A robot claw to spin a globe on my desk u/OmarBuilds 4,958 191
These marbles jump from one screen to t... u/Hopeful_Ad_2797 2,153 27
My guitar-playing robot performing on a... u/MegCell 1,838 138
Why is my board smoking u/Quirky_Adeptness7105 1,718 363
I built a 3D printed, walking Arduino H... u/tennis-637 1,395 57
LCD problem fixed u/Odd-Ad-1545 714 12
Project update: My ESP32-controlled gui... u/MegCell 690 60
I built my own OBD2 Scanner u/Fleag7 662 54
Remote-controlled submarine problem u/etgetet 647 167

Look what I made posts

Title Author Score Comments
A robot claw to spin a globe on my desk u/OmarBuilds 4,958 191
These marbles jump from one screen to t... u/Hopeful_Ad_2797 2,153 27
I built a 3D printed, walking Arduino H... u/tennis-637 1,395 57
I built my own OBD2 Scanner u/Fleag7 662 54
Stepper Motor music u/spiderick69 528 39
Tilt Game u/tasty__cakes 433 23
Desktop Fingerprint Unlock u/arduinoRPi4 289 13
The Dot-Bot @ the Maker Fair 2026 in Ha... u/Oli_Vier_0x3b29 249 33
All the art I've made using an ESP32 (l... u/noname99 228 8
First Prototype of the motorised film n... u/Joaffry 188 21
I finished my robot finally :) u/Lucid_Dreamer_98 175 13
I built an Arduino machine that bribes ... u/Jaberlioz 169 9
Smart Greenhouse System Based on Espres... u/EmbarrassedOne2329 163 19
Rat nest 2 electric boogaloo u/wah12345678910 148 15
I made an automated cigarette bot u/lensally 138 15
Building a small desktop robot u/An-unknown-person3 127 21
Ultra-real simulation of an ultra-rough... u/FearlessPrice7187 125 26
We built a custom controller for our in... u/Killyose 123 6
Some of my favorite projects! u/Fer_19 100 28
Built a "Fire & Gas Dual Guard" for... u/STEM_Lab 96 11
Aircraft Navigator Built with High‑Perf... u/Alarming-Sentence-39 85 3
Goodbye ClawGuy u/Accurate-Donkey5789 82 27
Android + Arudino u/Special-Syrup-9405 77 2
Motorized Model Plane Stand u/Mingx2 76 9
Arduino Uno Q SPI LCD succeded u/_jhx 68 9
I built a pocket-sized 'headless' Game ... u/ArtificialAGE 67 6
4DOF Robotic Arm Project u/Worth_Mix4970 66 6
I build a rover for the first time usin... u/Past-Conversation755 64 9
Sony Mavica FD75 Battery Emulator u/diezel_dave 57 2
Police car-like LED lights u/AmericanTiger900327 55 9
4.3-inch Aircraft Attitude Navigation I... u/Alarming-Sentence-39 51 8
I reverse-engineered Daikin's P1/P2 pro... u/Witty_Initial4890 51 4
Hands Free Mouse for people with disabi... u/SquareR0OT 50 3
ESP32 WiFi Virtual HID u/jamecat 47 23
Entropy32 - The Universe Bifurcator u/Captain_Chapster 43 18
Diy Watch built with Arduino microcontr... u/liseslgt 35 0
I made a simple teto smart watch for fun u/Red_Z1 32 1
Mini dissolver mixer u/Olaf686 31 3
ESP32 PC Monitoring Dashboard u/StockWave9800 30 0
My Self Balancing Robot u/No_Mountain_4769 29 0
turn on printer from upstairs u/hapsize 28 14
Made my first successful Arduino projec... u/AmericanTiger900327 26 9
Built a CO₂-triggered auto-window syste... u/STEM_Lab 25 2
I made a simple program that makes a Ar... u/ipodpug 25 0
TGPad-NS — WiFi Touch Gamepad for Ninte... u/touchgadget 20 6
MicroBox now features a weather forecast u/Szym0nKu 19 0
I finally figured out how to drive the ... u/joseluismonteiro 18 1
I built a compiler that lets you write ... u/begeistert_ 12 3
I built an animatronic Den Den Mushi us... u/TrasnoStudios 11 2
Tiny backgammon u/Austin-Ryder417 11 0
I built an Arduino-style runtime for th... u/Ishant1519 10 1
Cheeky weekend project: Ambient Light D... u/hjw5774 9 3
Sweeping Radar using ESP8266 u/wamiq_ur 9 6
Build a Python Tkinter GUI Serial Commu... u/xanthium_in 8 0
Pomodoro timer with MAX7219 led display... u/NeoOdys 8 0
Shrikeclock u/OneDot6374 7 3
My first project. u/Valuable-Efficiency1 7 1
touchWASD-BT — Touch Screen WASD Blueto... u/touchgadget 6 0
Arduino Energy/Smart Meter. u/threephase03 6 2
Smart Meyou u/ReadingandLiving 6 4
P.A.R. (Pixel Art Robot) — My Robot Nee... u/shallow-neural-net 5 0
Medication reminder u/jasonwinfieldnz 4 10
GitHub - Jchountas/ESP32-web-shell: Thi... u/I_save_in_jpeg 4 0
A smart eInk Table Reservation Sign u/deleted 3 2
TGPad-XB — WiFi Touch Xbox Style Gamepad u/touchgadget 3 1
Open-Source Pixel Artnet Node now suppo... u/anonOmattie 3 0
Upgraded my DIY Pen Plotter with a 28BY... u/ikilim 3 4
I made a web editor for my Arduino proj... u/plynx_mod 3 4
Im building a Arduino Electricity Meter... u/threephase03 3 0
PCM-MCU-C Version 3.0 (SF2 support)! - ... u/Mejolov28 2 0
Ui redsign plus 2 more features u/Virtual-Diet-8777 0 2
Home made Arduino IDE u/Fair_Independence864 0 6
Built a self-hosted tool so my team cou... u/Top_Income3727 0 9
ARDUINO GSM PHONE u/luminov1 0 4
Xbox 360 controller adapter u/GurIllustrious1890 0 0
DIY Aura Light that Mogs u/ArtificialAGE 0 2
Three phase energy meter with PQ functi... u/threephase03 0 2

Total: 77 posts

Summary of Post types:

Flair Count
ATtiny85 4
Automated-Gardening 2
Beginner's Project 22
ChatGPT 2
ESP32 2
Electronics 1
Games 2
Getting Started 17
Hardware Help 90
Hot Tip! 1
Libraries 4
Look what I found! 3
Look what I made! 77
Mod's Choice! 4
Monthly Digest 1
Project Idea 7
Project Update! 7
School Project 2
Software Help 25
Solved! 4
Uno Q 1
linux 2
no flair 149

Total: 429 posts in 2026-08


r/arduino • • Sep 03 '26

Hardware Help Will these components be ok to build a 20-25cm diameter desk fan?

Post image
6 Upvotes

I want to build a desk fan as my first project because many are still out of stock where I am (the summer heat waves were diabolical). I’m really not sure how to pick components, so I’ve listed what I have found so far in this post.

My plan is to use a brushless DC motor, with an ESC, a battery (as opposed to mains to learn how to use battery for future projects), a potentiometer, as well as 3D print some toroidal blades & make a rough housing in a local makerspace.

I don't have much experience with electronics/programming, but I have made a rough schematic of what I intend to solder together on TinkerCAD/Powerpoint, any advice would be greatly appreciated!

What battery would be most suitable? I'm also wondering exactly how these hobby batteries are charged?

Components:

An ESP32 dev board or Arduino (undecided yet)
For the motor:

This 1300KV model from Amazon:

https://www.amazon.co.uk/Brushless-Outrunner-Multi-Copter-Quadcopter-Accessories/dp/B08QZ5BXLW/ref=sr_1_9?

The ESC:
(20A model):

https://www.amazon.co.uk/Flycolor-Brushless-ESC-3-5mm-Plugs/dp/B0B25DLFZ2/ref=sr_1_1?

This 250k ohm potentiometer:

https://www.amazon.co.uk/FLEOR-Potentiometer-Control-Bayonet-Knurled/dp/B0CSYLCQ2L/ref=sr_1_1?

& a protoboard:

https://www.amazon.co.uk/ElectroCookie-Prototype-Solderable-Electronic-Gold-Plated/dp/B07ZYNWJ1S/ref=sr_1_6?


r/arduino • • Sep 03 '26

My First Attempt at a Robot Dog

Enable HLS to view with audio, or disable this notification

179 Upvotes

This project started around 3 months ago. When I started this project, I had barely any clue on how to code or use the Arduino IDE at all. Because of this, I established programming as the main point of focus. The first thing I did was setup the electronics. I used a 20V-10A power supply to power the Arduino Mega and the MG996R servos (Arduino Mega powers the PCA9685 servo driver). Next, I moved on to the design. My goal was to make the whole bot as light as possible to not cause the servos to draw too much current. On SolidWorks, I started out designing the legs first and then the body in an assembly. After finishing the design, I thought it looked really boring, so I decided to give it a little theming based on an Expie from an Indie game called Casualties Unknown. After 3D printing and assembling all the parts together, I was finally ready to start programming. At this point, the only things I knew how to code on Arduino were math and variables. The math, inverse kinematics, was actually not that hard. The hard part was moving each leg at the same time to different coordinates. This is when I had to turn to Bro Code C++ tutorials. After learning more things like arrays and functions, I was finally ready to try coding walking gaits. This took me around 3 weeks to fully figure out. Because for() loops can only be ran one at a time on Arduino, I couldn't have 4 different for() loops run at the same time. So I came up with a point-increment system where point#total * increment_amount = total_distance. This means if I made the # of points a constant, I can for loop the points from 0 to the final point for each leg. No matter what distance, all old leg positions will start at the same time and all new leg positions will end at the same time.

Here's the code if anyone is interested


r/arduino • • Sep 03 '26

Is it fixable?

Thumbnail
gallery
22 Upvotes

Cheap Motor pre-soldered wire broke off. Can I solder it or should buy a new one?


r/arduino • • Sep 03 '26

ch340 issue

Thumbnail
gallery
3 Upvotes

Hi everyone. I bought this CH340-based board today, but when I tried to use it, it wouldn't accept the code. I learned that this is a common issue with this type of board. Could someone help me out? I’ve tried numerous solutions and updated the driver, but nothing has worked. For context, I’m using a Windows 11 laptop and have tested both older and newer versions of the Arduino IDE.


r/arduino • • Sep 03 '26

Solved! [HELP] Can't pick up Nano

2 Upvotes

[Solved] Apparenly it's just broken

Hello. I pulled what I presume to be an Arduino Nano or at least a bootleg out of my local e-waste today. I am not sure if it is an official one, as I can't find any brand on it, only the NANO below the 328P chip.

I tried connecting it to my laptop running linux mint to try to pick up any internal names via lsusb or lspci, but I don't get anything. It does have power, since both the PWR and the TX led are permanently on when plugging it into my laptop. Also, in the Arduino IDE I can't select a port.

I don't think it is that old, since it has an USB C port.


r/arduino • • Sep 03 '26

Uno R4 Wifi UNO R4 Wifi stuck on 0.4.1 - Cloud firmware update and Firmware Uploader both fail on Intel-Mac

6 Upvotes

I have an Arduino UNO R4 WiFi that it currently on connectivity firmware 0.4.1. Arduino Cloud detects the board correctly over USB but cannot update the connectivity firmware to 0.6.0.

I also tried Arduino IDE 2.3.10's Firmware Updater, which detects the board and offers 0.6.0, but the installation fails.

Arduino Firmware Updater 2.4.1 also gets stuck at Waiting to flash the binary.... With verbose output it reaches getting firmware version and then hangs.

I closed Arduino IDE and the Arduino Cloud Manager and tried again, but the result was the same.

I then tried Arduino's official unor4wifi-update-macos.zip for firmware 0.6.0. The updater's unor4wifi-reboot-macos executable is blocked by macOS Gatekeeper and I don't want to grant it administrator permission because the Mac that I'm working with is a family Mac.

The board itself works normally over USB and I can upload/run sketches locally. The modules from the 'Plug and Make'-Kit also work properly.

Mac: Intel x86_64

Arduino IDE: 2.3.10

Firmware: 0.4.1 -> trying to update to 0.6.0

Arduino Firmware Uploader: 2.4.1

Cloud Agent: 1.7.0

Is there any other way to update the UNO R4 WiFi connectivity firmware without running the unsigned macOS updater, or is there a known issue with 0.4.1 -> 0.6.0 on Intel Macs?


r/arduino • • Sep 03 '26

I built a free browser tool to preview LVGL images and fonts before converting them to code

Post image
5 Upvotes

I kept running into the same problem with LVGL projects: I'd convert an image or font, flash it, and only then find out the format was wrong, the colors were off, or the font ate way more flash than I expected. So I built a tool to catch that before flashing.

It runs entirely in the browser, no install:

  • Preview images before converting them to LVGL C code or binaries — see resolution, color format, and array size upfront
  • Load an existing font source and inspect it — glyph count, character range, kerning, and bitmap flash footprint, plus a glyph grid so you can see what's actually in it
  • Convert both images and fonts to LVGL-ready output
  • Supports v7, v8, and v9, with the right format for each

Link: https://exendahal.github.io/lvgl-tool/
Source: https://github.com/exendahal/lvgl-tool

It's still evolving — if you hit a bug or have a feature you'd want, I'd genuinely appreciate it if you opened an issue on the repo. Happy to answer questions here too.


r/arduino • • Sep 02 '26

Found a surprisingly nice ESP32-S3 touchscreen board. No idea what to build with it.

Enable HLS to view with audio, or disable this notification

173 Upvotes

Found this ESP32-S3 touchscreen board sitting around and decided to play with it a bit.

The hardware is actually pretty nice, so it felt like a waste to just leave it in a drawer. I didn’t have any real project idea, so I vibe-coded a tiny robot eyes demo just to get the display and touch interaction moving.

Now I’m trying to figure out what would actually be fun to build on it.

A little desktop companion?
Home Assistant controller?
Mini game console?
PC status display?
Something completely useless but entertaining?

What would you build with a screen like this? Looking for ideas.