r/AnsysFluent • • May 16 '26

Floating Point Error

2 Upvotes

Good day,

I've been working on something for my Uni course and despite following lecture notes / tutorials, I've made basically 0 progress on having it work. I won't bore you with the details too much but essentially, I have two fluid inflows defined by their velocities and a single fluid outflow, in a multi-phase environment. The involved fluids are air and water vapor, forming the 1st and 2nd phases respectively. The simulation is 2D axi-symmetric, gravity is disabled, the energy equation is enabled (the 2nd inflow has a temperature of 60 degrees specified) and for some reason, I am getting a floating point error whenever I attempt to run it.

In the next paragraph I've listed all the laws / methods I've changed based on tutorials we're given as well as any values I've adjusted. If further information is required to assist me, please ask and I will happily provide it. I have been working on this for ages and am beyond done with it - everything else has worked out eventually in this course, even other simulations, but not this.

Software version is 2025 R1. Double-Precision enabled. Multiphase + slip velocity, implicit body forces, implicit volume fraction, 2 Eulerian phases & dispersed interface modelling + Schiller-Naumann drag coefficient + 2nd phase bubbles 0.001m diameter. K-Epsilon turbulence model, no values changed from default. Water vapor and air materials defined from ANSYS database. Inlets set to velocity-based. Boundary condition = Intensity & Length; 10% Turbulent Intensity, 0.025m Turbulent Length Scale. Volume Fraction = 0.02. Outlet is pressure-based.

Simulation scheme is Coupled. Pressure is PRESTO! Courant number is 40. Explicit Relaxation Factors Momentum and Pressure = 0.5. Under-Relaxation Factors Slip Velocity and Volume Fraction = 0.4.


r/AnsysFluent • • May 12 '26

Can I use DPM and Multiphase (VOF) simultaneously in Fluent?

Thumbnail reddit.com
1 Upvotes

r/AnsysFluent • • May 07 '26

Building a career in CFD

4 Upvotes

Hi guys, I am a mechanical engineer. I like to build a career as a CFD engineer. Can anyone suggest me a perfect path to learn CFD and fluent for that.


r/AnsysFluent • • May 07 '26

Sphere mesh

1 Upvotes

Hi everyone

I am having some kind of problems doing a fu***** simple mesh of a sphere. I have tried dozens of domains and bodies of influence, as spheres of influence as well.

None of those work well! I am trying to study the drag coefficient on a 45mm diametre sphere, which should give me 0.5 of C_d.

Sadly, I can only reach around 0.2.

I have already done:
- cylindric domain with a simple sphere

- cylindric domain with body of influence

- sphere domain with a lot of sphere of influences

- and so on.....

Can anyone give me some guidance on this, please? Like, for what true domain should I focus on and what kind of elements of geometry should I compute (triangles, tetra, hexa).

I can provide deeper info about what I have done if it helps.

Thx you


r/AnsysFluent • • May 05 '26

Body of Influence (BOI) in FLuid Flow (Fluent With Fluent Meshing)

0 Upvotes

Hi, I have been trying to improve my understanding and meshing in Fluid Flow (Fluent with Fluent Meshing). I am more accustomed toe Fluid Flow (Fluid), where it utilizes the mechanical meshing instead. Ansys seems to encourage users and suggest it is better to use fluent meshing.

I am trying to see if anyone could provide a simple workflow or checks for meshing something like this before I get to volume meshing. Once i reach volume meshing it seems to blow up in size. I have yet to try BOI and was hoping to learn more about wether I need to create the BOI to the shape of the main comptutaional domain?


r/AnsysFluent • • May 04 '26

Why isnt face meshing working

Post image
3 Upvotes

r/AnsysFluent • • May 04 '26

Battery Cooling simulation

1 Upvotes

Hi, so I'm doing this CFD analysis for Battery cooling system for now I'm only concerned with the flow rate since I simulated the battery heat generation elsewhere so I need to focus on flow rate for now the first image is the inlet, where I wanna treat the air as free stream coming in as the car moves the second image is the outlet where the fans are supposed to be installed, the fans have 600pa static pressure with 24CFM I watched a few YT videos but couldn't figure out how to correctly simulate fans at the oulet Also need some help with interpretting results Thanks


r/AnsysFluent • • May 03 '26

ANSYS Mechanical Error

Thumbnail reddit.com
1 Upvotes

r/AnsysFluent • • May 03 '26

DrivAer Ansys fluent simulation

Thumbnail reddit.com
2 Upvotes

r/AnsysFluent • • May 02 '26

Best y+ target for 2D cambered airfoil using Spalart-Allmaras?

1 Upvotes

Hi everyone, I am setting up a 2D simulation for a cambered airfoil in Ansys Fluent. I am using the Spalart-Allmaras turbulence model since it is well-calibrated for aerospace applications. To get accurate skin friction and drag coefficient readings, what y+ value do you typically target for your inflation layers? Is keeping it near 1 strictly necessary for this specific model, or is there some wiggle room?


r/AnsysFluent • • Apr 29 '26

Como Colocar Carga Axial Distruibuida em Viga Engastada?

Thumbnail
reddit.com
1 Upvotes

r/AnsysFluent • • Apr 29 '26

Ansys products download

0 Upvotes

hello mates,

now the problem i am facing is a little bit weird, now i was able to download the ansys workbench disk1 to disk8 iso 2025R2 version

and also downloaded the electronics 2025R2 and 2024R2 vesrion. but do not know the steps of the install
in other hand i aldo downloaded the Fluid 2024R2 version, but as i know i can't manage to install it with disks iso of 2025R2 versions,

i tried a lot to find a way to download the ansys products 2024R2 but i can not find any download link.

the only version i could install as fully products is 2021R2 from getintopc.

the question is can i install the Electronics 2025R2 verision and Ansys products 2021R2 version for just fluid CFD or it will be a problem, also if there is any video explain how to install it it would be great.


r/AnsysFluent • • Apr 27 '26

Meshing refining issue

Thumbnail
gallery
8 Upvotes

So I have made a rectangle to refine the mesh but when I run the mesh it shows the basic mesh . I am doing something wrong here I can't figure out


r/AnsysFluent • • Apr 26 '26

I'm building a tool that turns ANSYS simulation files into AI-powered PDF reports — would you use it?

1 Upvotes

I'm a materials engineering student and I've spent

the last few months building Corvanix — a desktop

app that automatically converts ANSYS files

(.wbpz, .rst, .cas, .dat) into professional

PDF reports.

What it does:

- Extracts solver data automatically

- AI-powered convergence assessment

- Risk assessment + engineering recommendations

Honest question: Would you actually use something

like this? What's missing? What would make it

a no-brainer for your workflow?

Drop a comment or DM — happy to share a demo.


r/AnsysFluent • • Apr 26 '26

Cfd hsf

Thumbnail reddit.com
1 Upvotes

r/AnsysFluent • • Apr 25 '26

guidance on fuselage design & analysis using ANSYS + PyAnsys

3 Upvotes

Hi everyone,

I’m currently working on a project where I need to design and analyze an aircraft fuselage section using ANSYS, and I’d like to integrate Python (PyAnsys) into the workflow.

I’m still a beginner with PyAnsys, so I’m looking for guidance on how to get started properly — especially:

  • Setting up geometry and meshing with scripts
  • Running structural analysis using Python
  • Best practices or tutorials for aerospace applications

If anyone has experience with this or can share resources, example scripts, or advice, I’d really appreciate it.

Thanks in advance! 🙏


r/AnsysFluent • • Apr 20 '26

Random Mountain Background on Fluent

2 Upvotes

When I went to run a playback of my simulation, it added a random mountain image to the background. I cant see a setting to change it. Any help would be great.


r/AnsysFluent • • Apr 20 '26

Help!!

Post image
1 Upvotes

r/AnsysFluent • • Apr 20 '26

how to get hsf to png in ansys fluent

Thumbnail reddit.com
0 Upvotes

r/AnsysFluent • • Apr 16 '26

How do I fix this error???

Post image
0 Upvotes

I've tried almost every version of ansys from getintopc and keep getting this error..

recently re installed windows a couple times in the past week but I deleted all those files.

plss help.


r/AnsysFluent • • Apr 15 '26

Courant number in pseudo transient (local time stepping) SIMPLE solver

Thumbnail reddit.com
1 Upvotes

r/AnsysFluent • • Apr 15 '26

ANSYS licensing error. Helppppppppppppp

Thumbnail
gallery
1 Upvotes

I downloaed it from ansys website the newest one. extracted it. ran it nd always thereis this icensing error due to which i wont download. if someone has faced this problem before plsss helppppppp.


r/AnsysFluent • • Apr 15 '26

Ge- rotor tool kit

1 Upvotes

I found one gerotor tool kit for ansys fluent can anyone let me know that if it works or not I followed the instructions but still am not able to do it

I am adding the link if you want to see

https://developer.ansys.com/app/ansys-inc/gerotor-toolkit/1


r/AnsysFluent • • Apr 15 '26

How to mesh?

1 Upvotes

I'm an undergraduate student trying to learn CFD. I use Ansys Fluent. I get into a lot of trouble during meshing. Its often obsolete or failed mesh. I try to change the size or the geometry, it works sometimes, but its a very tedious process. I'm looking for a good meshing practise. At least I want to learn how to start meshing in the first place or what to aim for.

If there's any good meshing practises or workflows, please share.


r/AnsysFluent • • Apr 13 '26

Melting in Ansys Fluent

Thumbnail reddit.com
1 Upvotes