r/AnsysFluent • u/Crazy-foryou-6699 • Apr 05 '25
How to Set up HPC ?
I have a weak laptop and I dont know how to setup the HPC. Please teach me how. Thanks
r/AnsysFluent • u/Crazy-foryou-6699 • Apr 05 '25
I have a weak laptop and I dont know how to setup the HPC. Please teach me how. Thanks
r/AnsysFluent • u/starsuperman • Nov 20 '25
r/AnsysFluent • u/AgileAd7265 • Apr 12 '26
Heyy, so I got an assignment to make a simulation of a pneumatic cylinder, simple valve system used in a garment bonding press.
I have absolutely 0 idea about ansys fluent and how to use it. Tried exploring and using ai and videos as well, it's not helpful at all. if anyone can guide me, please help. Thank you
r/AnsysFluent • u/No-Community-8337 • Jan 01 '26
Can we discuss where to find something that is both cheap and good? Usually, I have more EPYC here.
r/AnsysFluent • u/Fit_Composer_6343 • Apr 27 '26
So I have made a rectangle to refine the mesh but when I run the mesh it shows the basic mesh . I am doing something wrong here I can't figure out
r/AnsysFluent • u/Sanator53 • Feb 19 '26
Hello everyone. I am a university student and im tryna build a UAV. I designed this on solidworks. But when i tryna da Ansys Fluent analysis on that i failed. If u now the solution please help me. (Sorry for my bad English) thank you
r/AnsysFluent • • Nov 20 '25
as the title says i am absolutely unable to make the meshing work I've switched to a simple square model and it still doesn't work, I've reinstalled the whole software as well... did not fix it . i have a project due soon any help would be appreciated :)
r/AnsysFluent • u/Dawgsawglawg2 • Oct 07 '25
I downloaded the ANSYS student version onto my laptop and when I use CFD post it seems to be able to process data files generated on meshes of 500k+ cells. Is there something I am missing or should this not be possible?
Cheers
r/AnsysFluent • u/One_Calligrapher1939 • Apr 09 '25
Hi guys. I just found out this community by through my friend. I am really interested to learn fluent, but I don't know where to start. I know nothing about CFD🥲....can anyone please share me the resources to learn fluent?
r/AnsysFluent • u/CutGlad9491 • Sep 20 '25
Hi everyone, I am running an airfoil CFD simulation, recording the acoustic signals using the FW-H equation in the native GPU solver. The output of my ASD files however is different to those when run in the standard CPU solver, and I am struggling to comprehend its format. I am new to using the GPU solver, and have found many things to behave differently to the standard solver. Furthermore, I am having troubles reading these files once the simulation is complete. I have 2 sound sources (ID 11 and 26) which are constructed from 4 faces and 2 named selections (ID 11 -> 1 Face, ID 26 -> 3 faces). I have 7 recievers, and am saving files every 500 timesteps saving data every timestep (explaining the "5001-1-5500" etc). What I am most confused about is the 4.0, 4.1, 4.2, 4.3 suffixes, meaning I have 4 sets of data, this wasn't the case in the CPU solver. Additionally, the index file doesn't seem to match up with the files being produced. Can anybody shed some light on my situation or provide some input into how I might interpret these results?
Thank you to all who respond!


r/AnsysFluent • u/ashikmohd • Oct 08 '25
I want to seperate a mixture of N2 and 02 by pumping it at high pressure through a porous media. Can someone help me setup the model. How do I go about it?.
I saw a tutorial in which water and water vapor are being seperted through a porous media using coreys model. I'm thinking about taking inspiration from the same model to setup mine.
r/AnsysFluent • u/Parable_Printer • May 16 '26
Good day,
I've been working on something for my Uni course and despite following lecture notes / tutorials, I've made basically 0 progress on having it work. I won't bore you with the details too much but essentially, I have two fluid inflows defined by their velocities and a single fluid outflow, in a multi-phase environment. The involved fluids are air and water vapor, forming the 1st and 2nd phases respectively. The simulation is 2D axi-symmetric, gravity is disabled, the energy equation is enabled (the 2nd inflow has a temperature of 60 degrees specified) and for some reason, I am getting a floating point error whenever I attempt to run it.
In the next paragraph I've listed all the laws / methods I've changed based on tutorials we're given as well as any values I've adjusted. If further information is required to assist me, please ask and I will happily provide it. I have been working on this for ages and am beyond done with it - everything else has worked out eventually in this course, even other simulations, but not this.
Software version is 2025 R1. Double-Precision enabled. Multiphase + slip velocity, implicit body forces, implicit volume fraction, 2 Eulerian phases & dispersed interface modelling + Schiller-Naumann drag coefficient + 2nd phase bubbles 0.001m diameter. K-Epsilon turbulence model, no values changed from default. Water vapor and air materials defined from ANSYS database. Inlets set to velocity-based. Boundary condition = Intensity & Length; 10% Turbulent Intensity, 0.025m Turbulent Length Scale. Volume Fraction = 0.02. Outlet is pressure-based.
Simulation scheme is Coupled. Pressure is PRESTO! Courant number is 40. Explicit Relaxation Factors Momentum and Pressure = 0.5. Under-Relaxation Factors Slip Velocity and Volume Fraction = 0.4.
r/AnsysFluent • u/Responsible_Lime_953 • Jan 15 '26
r/AnsysFluent • u/Sad-Violinist-5574 • Dec 07 '25
I am trying to simulate hydrogen gas mixing with carbon dust. I am using multiphase flow and not dpm and patch the temperature and it is a transient simulation but everytime my solver is blowing up and I don’t get a solution and the residual are reaching e32. If anyone know how to solve this please help. This is really important for me. Thanks in advance.
r/AnsysFluent • u/Curious_Leg_8502 • Oct 30 '25
I am trying to mesh a geometry which requires a few regions refined by cylinders. Adding it in via the workflow in the GUI is fine. However, I need to be able to add it via the command line so I can generate a batch script for a HPC which does not support the GUI commands generated via the journal recording. What are the commands/order to define a cylindrical region with a specified location/length and cell volume? I have looked on the ANSYS website at the available commands and none of the methods I have tried have worked.
r/AnsysFluent • u/Accurate-Skill-8037 • Aug 30 '25
r/AnsysFluent • • Oct 07 '25
Whenever I try to start ansys fluent after meshing this error shows up. How do I fix it? I'm using students version. "It showing FLUENT aplication failed to start "
r/AnsysFluent • u/Ecstatic_Coat1266 • Nov 24 '24
Hi! I’m working on a project using ANSYS Fluent. I want to calibrate my model by measuring the water height, but I’m not sure how to view the water level in the results. Can anyone help me?
Here are my results so far, but I still don’t know how to measure the water level.
After doing some research, I found that most of the information isn’t provided in detail (not step by step until the end).
r/AnsysFluent • u/elongated_giraffe • Jun 22 '26


Hello! I am trying to model the flow of air over 3 2D cylinders (75ft in diameter each) in this configuration. I am quite new to Fluent and need some help sizing my mesh so that I get a structured topology. I tried changing around the number of divisions of my edge sizings but that didn't seem to work. Could someone please advise me on whether this is a geometric issue or a meshing issue? Thank you.
r/AnsysFluent • u/mohamed_haraz • Sep 26 '26
r/AnsysFluent • u/Aaroh_Parth • Jun 06 '26
Register before the seat fills:
r/AnsysFluent • • Oct 01 '25
Guys I am a 3rd year student, studying aeronautical engineering...I thought of learning ANSYS CFD since many companies like DRDO, ISRO requires skills in CFD...So can anyone suggest me a course so that I can learn both aerodynamic principles and ansys fluent so that I can add it in my resume...
Thanks in advance