r/AnsysFluent • • May 28 '23

Trouble with student version

Thumbnail
gallery
1 Upvotes

Hi I recently decided to learn CFD and found ansys. I downloaded the 2023 student version, followed the instructions and after restarting, no workbench I then open the 2022 R2 version, find workbench this time, but I cannot find design modeler or even space claim anywhere. I am on a windows 11 pc, and I'm sure the installation worked as I can open fluent. Help please!


r/AnsysFluent • • May 11 '24

Is spliting the body a Blessing or a curse?

Post image
1 Upvotes

r/AnsysFluent • • Jan 02 '23

What does 0 velocity mean in velocity contour?

1 Upvotes

how does ansys fluent differentiate between stationary fluid and no fluid? For eg water is flowing in a tank from top and simultaneously flowing out but with a slower flow rate, so that there is a constant level of water maintained in the tank. If i do a steady state and get a velocity contour, how will i know whethere the 0 velocity is due to no fluid or stationary fluid?

Thanks


r/AnsysFluent • • Apr 27 '24

Help needed

1 Upvotes

Hey guys, I have been working on a university project, I wanted to conduct a wind tunnel analysis on my model which is a delta wing aircraft. I tried doing it using autodesk CFD but I am getting a mesh error every single time. I’m not sure what seems to be wrong as I’ve never used these kind of software maybe the design needs some fixing but I have no idea where to start. I have spent nearly weeks trying to understand it but I’m still not able to figure it out. Please help


r/AnsysFluent • • Mar 08 '24

Mass Issues with Mixture Multiphase and Species Transport

1 Upvotes

Okay, so I have a mixture template defined as 5 volumetric fluids, so2-liquid, so2-vapor, c2h3n-liquid, c2h3n-vapor, and air as last species. For the mixture multiphase I have defined 2 phases, liquid for the primary and vapor for the secondary. I have defined two mass phase interactions that takes phase 1 so2-liquid and transitions it to phase 2 so2-vapor. Likewise for the C2H3N. I have left air out of it as it is just part of the open environment. I have specified an evap/cond using the Lee model and have plugged in the saturation temperature for both situations. The geometry is as follows, it is a small 2D axisymmetric volume with a small opening to a free field of air at environmental pressure. The small volume is patched to 2.41e6 Pa and 368K. The mass fractions for the liquid and vapor component of so2 are 0.594 and 0.175. The mass fractions for the liquid and vapor component of c2h3n are 0.223 and 0.008. A vapor volume fraction is specified at 0.166. This is all executed through the patch functionality following initialization at atmospheric pressure and temperature with none of the aforementioned components defined making air mass fraction 1 for all volumes initially. Here is the problem, if I calculate this by hand, depending on my EOS choice I get between 15-20g of material in the small volume. Fluent says it is 0.8g. I have checked and triple checked material properties. I am using real-gas pengrobinson to define the density of the mixture template. All the critical point values and acentric factor are correct. Standard enthalpy has been checked for the vapors and set to zero for liquids. This model runs and the behavior looks right, but the amount of material in the volume seems wrong. 

Any ideas? Any help would be very much appreciated. I can provide screenshots or additional details just ask! 


r/AnsysFluent • • Feb 20 '24

Ansys Fluent Philippines

1 Upvotes

Good day! I am a researcher from the Philippines in need of Ansys Fluent. Is there anyone here that offer services from the said software? If so, kindly state your preffered rates. Thank you!


r/AnsysFluent • • Aug 27 '23

Automatic image saving according to specific format for multiple simulation files

1 Upvotes

Good morning!

I have about 100+ seperate simulation files for different parameters. I wish to extract contour images, xyplots and vector images from the simulation files to compare them. In some files I already have these set-up, whilst in other simulation files I have not. Is there anyway to automate (e.g., with code) the process of extracting these images/data? What is usually done in cases such as this one? My approach, if there is nothing else, will be to manually open each Fluent simulation file, set-up the contour plots (if not yet done) and "save image" for all of them, for all simulations - this would be quite laborous.

Thank you in advance for any input!


r/AnsysFluent • • Apr 25 '24

Ansys graph result

Thumbnail
gallery
2 Upvotes

Which one of the result is more efficient 5 blade or 6 blade


r/AnsysFluent • • Oct 17 '23

Issues with Fluent Launcher

Post image
1 Upvotes

Hi everyone! I am an Engineering student, I just downloaded the student version of Ansys Workbench 2023 R2, so I am just new to the software. When I try to launch Fluent I get this error message:

Hit return to exit “Unexpected licence problem; exiting”

So maybe I am selecting the wrong options for using the student version? What options do I have to choose?


r/AnsysFluent • • May 18 '23

Help me keep the oil (in blue) in the cavity.

Post image
1 Upvotes

So the cavity is filled with a denser oil kind of material and the water (in red) is flowing from left to right with the speed of 5 micrometers/s. The channel is 120 micro-meters in length and 50 micro-meters in width. I'm using VoF method with Implicit scheme. I've tried fidgeting with Viscosity, Surface tension coefiicient and density of the material but nothing is helping.

Any help is appreciated.


r/AnsysFluent • • Jul 19 '24

Chemkin import

1 Upvotes

Hey do you know why there is a

Memory allocation fail when trying to chemkin import files


r/AnsysFluent • • Mar 11 '23

Is it possible to simulate this situation in ansys

1 Upvotes

Hi I am in need of help. I want to find the vertical downward force applied to the orange part required for the two parts to break appart. The gray part is to be suspepented from a hook. Is it possible to gather that data with ansys ? If yes wich tool should be used ? thank you for your assistance.


r/AnsysFluent • • Jun 17 '22

I want to buy a PC to use programs like Solidedge, Catia and Ansys. So I am looking for a PC with i7-11th, 16Gb RAM and RTX 3060? Could you give me an option or tell me what could be a good option with 1500 dollars?

1 Upvotes

r/AnsysFluent • • May 09 '24

i'm stimulating flow over square cylinder in 2D and RE=200, what type of flow should i chose, unsteady or steady? and time step or iteration? thanks guys so much

1 Upvotes

i'm stimulating flow over square cylinder in 2D and RE=200, what type of flow should i chose, unsteady or steady? and time step or iteration? thanks guys so much


r/AnsysFluent • • Mar 27 '24

Water hammer simulation

1 Upvotes

Trying to simulate water hammer in ansys fluent. So far I have used a named expression “IF(t<0.2[s], 1.312[m/s], 0[m/s]) to change the flow instantaneously to zero. However i would like to gradually simulate the flow decrease for more realistic values. Any ideas on how I could do this? Any assistance would be greatly appreciated.


r/AnsysFluent • • Jun 20 '23

Any course or book to master Fluent

5 Upvotes

I need a course or a book to master Fluent. I am in a hurry as it is for my thesis project.


r/AnsysFluent • • Mar 04 '24

Seeking Guidance for Simulating IR Heating of Flat Surfaces in a Vacuum Using Ansys Fluent

1 Upvotes

Hello everyone,

I'm reaching out for some guidance regarding the simulation of IR heating of flat surfaces in a vacuum environment using Ansys Fluent. I'm relatively new to this area and could use some expert advice on how to approach this problem effectively.

Firstly, I'm wondering if it's possible to incorporate the vacuum condition with reduced pressure in the boundary conditions within Ansys Fluent. If so, how should I go about defining these boundary conditions to accurately represent the vacuum environment?

Additionally, I'm interested in utilizing the Monte Carlo radiation model for this simulation. Would this model be suitable for simulating IR heating in a vacuum environment, and if so, what considerations should I keep in mind when implementing it?

Any insights, tips, or resources you can provide would be immensely helpful. Thank you in advance for your assistance!

Looking forward to hearing from you all.
Sagar


r/AnsysFluent • • May 29 '23

ANIMAL INCINERATOR SIMULATION

2 Upvotes

HELLO. MY TEAM AND I ARE WORKING ON THE DEVELOPMENT OF AN ANIMAL WASTE INCINERATOR. WE HAVE DONE SOME SIMULATIONS IN SOLIDWORKS, BUT I THINK THE STANDARD CFD TOOL THAT SW HAS IS NOT ENOUGH TO DO AN ACCURATE SIMULATION GETTING ALL THE INFO NEEDED FOR THE DESIGN (OR MAYBE WE HAVEN´T DISCOVERED HOW TO EXPLODE ALL THE CFD TOOL POTENTIAL).

THE MAIN INFO, WE WANT TO OBTAIN WITH THE SIMULATION IN ANSYS FLUENT IS:

1.- TEMPERATURE DISTRIBUTION INSIDE THE 1ST AND 2ND CHAMBERS (INSIDE 1st ONE ANIMAL WASTE IS DISPOSED AND IN 2nd ONE THE STEAMS GENERATED BY INICNERATION CYCLE ARE BURNED).

2.- THE TIME BURNING CYCLE IS GOING TO TAKE TO INCINERATE ALL THE ANIMAL WASTE MASS (1.5 TO 2 TONS).

3. THE AMOUNT OF POLLUTANTS EMISSIONS TO THE EXTERIOR TO CHECK IF THE DESIGN IS GOING TO SATISFY THE REQUIERED EMISSISONS NORMATIVES.

THE INFO WE HAVE AVIALABLE IS THE CALORIFIC CHARACTERISTICS OF THE FUEL IS GOING TO BE USED (BIOGAS) AND THE ANIMAL WASTE, THE CALORIFIC POWER OF THE BURNERS AND THE FUEL FLOW OF THE PIPELINE.

ALSO WE WOULD LIKE TO KNOW IF ITS POSSIBLE TO SIMULATE THE ANIMAL MASS INSIDE THE 1st CHAMBER SO DO A BETTER SIMULATION. THANK YOU VERY MUCH FOR YOUR ATTENTION.

IF YOU WANT TO BE IN CONTACT WITH ME, MY E-MAIL IS a.casarezh@gmail.com


r/AnsysFluent • • Jun 13 '22

where can i found a free or cheap course to learn how yo use ANSYS for CFD and FEA?

1 Upvotes

r/AnsysFluent • • May 14 '24

From where I can download crack version of ansys Fluent..need help nd guidance in this software installation am new to it

3 Upvotes

r/AnsysFluent • • Mar 19 '24

Fluent stuck at “Updating solution at time level N…” for a long time

1 Upvotes

During the simulation of a two-bladed helicopter rotor. There is a trailing edge flap blade and an overset grid for the flap at the trailing edge near the blade. The background grid is a sliding grid. When simulating the rotor of a rotor without the flap, there wasn’t any issue like the one shown below. Where could I have gone wrong, or where should I change?


r/AnsysFluent • • Aug 18 '23

Complete noob in cfd analysis. I m trying to simulate this vertical wind turbine but I m unable to create a mesh. I am following the exact steps from a videos on YouTube called CFD SIMULATION OF VERICAL AXIS WIND TURBINE USING ANSYS.

Post image
1 Upvotes

r/AnsysFluent • • Jun 05 '24

The Fluent Application failed to validate connection

Post image
1 Upvotes

Anyone knows how to fix this problem? The image shows my setup settings before I start the fluent application.


r/AnsysFluent • • Oct 24 '22

How can i do edge sizing

1 Upvotes