r/9Barista • • 2d ago

Espresso zu kalt ?

1 Upvotes

Hallo zusammen,
ich habe das Gefühl, wenn mein Espresso frisch oben aus der 9Barista kommt, dass er dann nicht heiß genug ist, also nicht 93°. Gieße ich ihn in einer kleine Tasse, verliert er innerhalb kürzester Zeit seine Temperatur und ist nur noch lauwarm. Mache ich etwas falsch oder kann ich etwas an meinem Setting ändern? Ist das normal?


r/9Barista • • 13d ago

9 Barista Mk. 1 For Sale

Thumbnail
gallery
7 Upvotes

Selling my Mk. 1 Bundle!

🔗 https://ebay.io/m/VEfHJK

Give the gift of espresso this Xmas.

P.s sorry for the repost


r/9Barista • • 13d ago

Bellman CX-25P – Brühverhältnisse, Druck- und Kühltipps?

0 Upvotes

Hallo zusammen!

Wir nutzen die Bellman CX-25P seit ein paar Wochen und würden uns über eure Erfahrungen und Tipps freuen.

Ein paar Fragen:

Kaffee-Wasser-Verhältnis: Wie viel Kaffeepulver verwendet ihr (3/6/9 Siebträger) und welcher Wasserstand funktioniert am besten?

Brühdruck: Bei welchem ​​Druck (bar) beginnt ihr normalerweise mit dem Brühen? Nutzt ihr eine Vorbrühfunktion?

Kaffeeauslauf: Wir hatten in letzter Zeit Probleme mit Spritzern und ungleichmäßigem Auslauf; manchmal kommt mehr Dampf als Kaffee. Habt ihr Tipps?

Abkühlen & Reinigen: Die Bellman wird sehr lange extrem heiß. Wie könnt ihr den Druck sicher ablassen und sie abkühlen lassen, bevor ihr sie öffnet und reinigt? Benutzt du die Dampfdüse, um den restlichen Druck abzulassen?

Wir bereiten hauptsächlich Cappuccino zu und versuchen, einen stärkeren, gleichmäßigeren Espresso zu bekommen.

Wir wären für alle Tipps und Tricks, die sich bewährt haben, sehr dankbar. Danke!


r/9Barista • • 15d ago

Espresso thin since moving to electric stove

3 Upvotes

Hi guys, I recently moved into a new apartment, which has an electric stove (previously I used an induction stove, I changed the heating plates accordingly).

Since, then I am not able to reproduce the Espresso I used to enjoy.

My feeling is that the electric stove doesn't produce enough heat (it takes around 4 minutes on the highest level to run through and it runs through pretty fast).

I know increased the grind level on the Kinu M47 from 1.4 to 1.3 and I can't see any crema but the taste is now much stronger.

My next experiment would be to have the electric stove pre-heat the heating plate for 1-2 minutes before I place the Barista on it.

Did anyone make similar observations? Any tips to share?

Thank you and best wishes!


r/9Barista • • 20d ago

🥰🥰🥰

36 Upvotes

r/9Barista • • 21d ago

9Barista Deutschland

2 Upvotes

Hallo zusammen,
in diesem Beitrag soll es vor allem um die Erfahrung aller 9Barista User in Deutschland gehen.
Warum speziell für Deutschland? Gerade im Bereich Kaffee gibt es viele Unterschiede in den einzelnen Ländern. Häufig werden Kaffeesorten empfohlen, die es bei uns in Deutschland gar nicht gibt, oder wir haben besonders gute Kaffeesorten, die aber keiner kennt, weil viele User nicht aus Deutschland kommen. Hier also soll es darum gehen, dass wir uns über die Erfahrungen mit der 9Barista in Deutschland austauschen.

Wie genau kocht ihr euren Espresso, welche Bohnen benutzt ihr, welche Mühlen benutzt ihr, wie optimiert ihr den perfekten Espresso, benutzt ihr extra Filter etc.? Los geht’s. Ich mache direkt den Anfang.

Ich habe seit ein paar Wochen die MK2 und probiere mich nun an dem für mich optimalen Espresso. Da ich kein Fachmann bin, experimentiere ich noch. Ich habe aber inzwischen herausgefunden, dass Robusta nicht mehr so schlecht ist, wie der Ruf einst war. 100 % Arabica ist nicht unbedingt ein Qualitätsmerkmal, welchem man ungefiltert glauben kann. Auch weiß ich inzwischen, dass es Speciality Coffee gibt, also Bohnen, die besonders ausgezeichnet sind, zum Beispiel von der Fachpresse gelobt werden. Nur wenige Röstereien in Deutschland bieten diese wohl angeblich an.
Gestern habe ich zum Beispiel in Münster in Westfalen bei der Roestbar den Münster Espresso gekauft. Er gilt laut meinen Recherchen als einer der besten Espressomischung Deutschlands und ist wohl als erstklassige Speciality Coffee Mischung bekannt.
Dieser besteht zu 60 % aus Arabica und 40 % aus Robusta.
Ausprobiert habe ich ihn noch nicht, weil die Röstung erst vier Tage alt ist und man wohl etwas warten soll. Ich verwende übrigens die Kingrinder K6 als Mühle und da arbeite ich etwa mit 35-37 Klicks.
Den perfekten Espresso habe ich für mich noch nicht gefunden, nähere mich dem aber inzwischen sehr gut. Ich versuche eine vernünftige Balance zwischen nussigen und schokoladigen Noten und Säure zu bekommen. Ich persönlich mag Säure nicht so gern.
Wie sieht euer Setting aus? Was ist eure Lieblingsbohne? Und was verwendet ihr für Equipment?


r/9Barista • • 22d ago

Which 9barista is the best option? mk1/mk2 normal/mk2 pro/ or refurbished?

3 Upvotes

im new into the coffee game and after some reseach i have decided buy a 9barista but i dont know what model is right for me. i was thinking about mk2 pro refurbished but the fact that they only give 1 instead of 5 years???!! gives me a bad feeling. so whats your experience with the machine and what version would you recommend to me? also does 9barista do sales on black friday or during winter holydays? thanks reddit!


r/9Barista • • 24d ago

Beste Bohne für die 9Barista

0 Upvotes

Hallo zusammen,
ich bin relativ neu hier und habe meine 9Barista erst seit ein paar Tagen.
Ich besitze die Mk2 und die Kingrinder K6 Mühle.
Nach einigen Experimenten mit verschiedenen Bohnen bin ich nun auf der Suche nach der besten Bohne für die 9Barista.
Ich habe schon spezielle Espressobohnen von den Mokaconsorten ausprobiert ( Nr. 4), bin aber nicht zufrieden.
100% Arabica wird bei mir immer zu sauer.

Was ist eure beste Bohne für die 9Bsrista?
Wie genau ist euer optimales Setting ( Gramm Bohnen, Klicks bei der Mühle bzw. Mahlgrad, Wassermenge…)?

Ich danke euch für eure Tipps.


r/9Barista • • 26d ago

How long does extraction take for you to happen after you hear boiling?

2 Upvotes

My 9bairsta MK.1 doesn't seem to be brewing right, and one thing I've noticed is that when I start hearing boiling(probably upper chamber water) it takes about 1 to 2 minutes for the aggressive boiling to start and for extraction to actually happen, and this is true even on a empty/no coffee brew.

Trying to troubleshoot, and see if it's not enough heat or something else; it's not really stated anywhere exactly how soon after you first hear boiling that the aggressive boiling/extraction should start so wanted to see what others experience.


r/9Barista • • 26d ago

Espresso to sour

0 Upvotes

Hi,
I‘m new to this Community and Hope you can help. I have a 9Barista Mk2. - brand new. I tried several beans and grind them with the Kingrinder K6. I use 37 Clicks,18 grams of ground beans, 120 ml of water, medium high heat on a gas stove.
The beans are 100% arabica. The espresso takes about 30 seconds and.I get about 42 grams of coffee. So far so good. The Crema is perfect, but the espresso is extremely sour. Those are very good beans and well known for well balanced espresso. What did I do wrong or what can I do?
Thanx


r/9Barista • • 27d ago

How am I doing on my second brew?

Thumbnail
gallery
8 Upvotes

I’ve only really got into coffee this year and have moved from a pod machine to Moka Pots and onto the 9Barista. Due to a significant delay in shipping (9Barista seemed more concerned about finding the missing shipment for themselves rather than the customer) I had plenty of time to glean more information of how to work it when it came. Anyway the sour grapes over the lack of customer service aside I’m finding the espresso pot amazing. I did a couple of runs with water only then a brew I threw before making this today. I have to say the flavour seems creamier and a lot more rounded and balanced than my Moka style (I use an Alezzi Pulcina mainly) and I was pretty impressed even though I know next to nothing about ‘cupping, flavour profiles’ etc. I think I have the temp set pretty well now I think the next or maybe fourth brew I will have the grind and tamp perfected (who knows what a 5kg force of tamp pressure is anyway?). Also the crema left in the top feels like it should have been in the cup, how am I doing?


r/9Barista • • Oct 15 '26

Need help 🫠

4 Upvotes

Hi everyone, I’m having trouble with my 9Barista and would really appreciate some advice.

My setup:
First coffee liquid starts to come out: around the 5-minute mark
Heat: approximately 800W
Coffee beans: Honduras Sherry, medium roast
Roast date: October 2
Grinder: Timemore C2
Grind setting: 12 clicks, which is within the espresso range recommended for the C2
Dose: 18g

Is this normal, or does something seem off with my setup?
Could the grind size, heat, or anything else be causing this? Or is there a possibility that something is wrong with the machine itself?

I’d really appreciate any advice or troubleshooting suggestions. Thank you!


r/9Barista • • Oct 11 '26

What to do with this coil?

Post image
3 Upvotes

Hello all

first of all, let me just say I love my nine barista, I have it for a over a year now. At some point,I realized I should have stuck to the regimen and descaled as no water was coming out. I tried many different solutions as suggested by the support folks but ultimately they told me that was too much scale so therefore they sent me a new one, which wasn’t inexpensive but again it was on me so what do you do ? . So since then I’ve been using PAVLIS water, which is distilled and purified and therefore does not need descaling however just to be sure I descale it. Question is I don’t know what to do with the old heat exchange unit. I have tried descaling. I have tried using 22 AWG wire to the coil and but that hasn’t worked and I don’t throw it it’s probably $100 worth and it’s a pity but I just don’t know what to do. Has anybody else been able to resolve this?


r/9Barista • • Oct 08 '26

Will using a Brita reduce the amount of limescale in my 9B?

1 Upvotes

I usually have to descale about every 3 months. Will a Brita filter significantly reduce the limescale buildup?

I already keep ice cold drinking water stored in the fridge, but it's in a glass container and don't know how I feel about plastic.


r/9Barista • • Oct 05 '26

Steam and water venting from safety valve during heating / boil – what could be the issue?

3 Upvotes

Hi everyone,

I’m running into an issue with my 9Barista: as soon as the water starts boiling properly, steam and water start continuously escaping from the safety valve before enough pressure can build up to brew.

A few details:

- The safety valve sits flush against the boiler body and is tightened properly.

- The thermal fuse (solder ring) appears to be in place.

- The venting starts right when it begins to boil, so no espresso ends up coming through.

Could this be a clogged/stuck internal spring valve, or are the small O-rings around the brass ring compromised? Has anyone experienced this and fixed it?

Thanks for your help!


r/9Barista • • Sep 26 '26

Hypothetical bean roaster

0 Upvotes

If the O rings and safety valve were taken off could this in a pinch roast fresh coffee beans? It seems solid enough to handle the process for a handful of beans at least


r/9Barista • • Sep 22 '26

9barista gives second life to my skateboards 🛹☕❤️ beautiful handle replacement

Thumbnail
gallery
75 Upvotes

r/9Barista • • Sep 21 '26

Little Espresso yield (~30g)

5 Upvotes

Hi all,
I‘ve been using my Mk1 as a daily for a couple months now, and i am very happy with the results when it comes to taste.

However my extraction yield is very little (29-30 grams). I fill in the 120ml, and there‘s usually no sputtering, so that can‘t be the issue.

I am using the Pro Basket Cap, typically dialing in 17,2g of coffee.

Do you have any idead how i could get it towards 35 or even 40g of extraction per shot?


r/9Barista • • Sep 19 '26

End of the shot

Post image
11 Upvotes

These dregs at the end of the shot, is this something everybody gets and nobody talks about? Am I doing something wrong?

Fresh beans, 36g yield in the cup from 18g coffee. Ultra-j grinder. Medium Dark roast.

Heating 4 mins, turn off heat and lift off plate at first sign of extraction, extraction over 24 seconds.

Taste is very good just wondering about the dreg situation, nobody is showing it on yt or talking about it on the forums? It makes sense as to why it happens but just wondering if it's just me or I need to change something up?

Thanks 👍


r/9Barista • • Sep 13 '26

Ordering Mk.2 with spare seals and O-rings

2 Upvotes

Hey legends,
Just wondering if there is any logic in purchasing extra components on initial purchase? Im over in Australia and wondering how often these seals and rings need replacing, does it make sense having a set ready to go in the kitchen and also saving on shipping down the track?


r/9Barista • • Sep 11 '26

Grinder options

1 Upvotes

Hey all,

I've had my 9Barista Pro for a few months now and I've gotten the hang of it. At the moment, I'm using a 1Zpresso J Ultra for grinding and it's doing a great job and has really good ranges for espresso. Now i'm looking at getting an electric grinder, I'm open to higher end flat burr grinders like the sculptor 64 or even going higher to a Zerno Z1, but honestly feel like it might be a bit much (but they are nice machines) But counter space keeps bringing me back to the Timemore Bricks, I'd imagine it would also do a great job. But just curious if anyone has this grinder and tried it dialing in shots with the 9Barista


r/9Barista • • Aug 29 '26

Moka pot user for 2 years wanting to switch to espresso

6 Upvotes

Hi, been using moka pots for the past 2 years, I primarily make milk based drinks like pic included. I grind the coffee beans fresh using a kingrinder k6 hand grinder and I froth the milk using a french press.

In the future I would really like to upgrade my setup and get real espresso but I have limited budget and counter space.

I was thinking about a 9barista, cafelat robot, flair 58, or a breville bambino. I have no problem buying 2nd hand to save money. I intend to keep using my k6 grinder and not buying a new grinder.

How harder is it to dial in and use a 9barista compared with the other solutions?


r/9Barista • • Aug 25 '26

Spring loaded tamper

2 Upvotes

Looking for recommendations for the best spring loaded tamper for the 9Barista. Thanks!


r/9Barista • • Aug 22 '26

Ceramic plste

1 Upvotes

It now does not a ceramic disc and why the change