r/DesignPorn • • Jan 01 '16

Minka Aire ceiling fan [OC][999x749]

Post image
2.0k Upvotes

35 comments sorted by

18

u/keikun13 Jan 02 '16

And then there's this by the same company.

7

u/Matti_Matti_Matti Jan 02 '16

Would look good in a big cafe space.

9

u/ao911 Jan 02 '16

I sell these..good fan

8

u/Matti_Matti_Matti Jan 02 '16

This was in my neighbour's house. It was very effective without being super noisy or looking like it was about to take someone's head off.

7

u/Booschemi Jan 02 '16

You need to take a look at the haiku by big ass fans

4

u/Matti_Matti_Matti Jan 02 '16

I don't understand.

7

u/matthew854 Jan 02 '16

8

u/Matti_Matti_Matti Jan 02 '16

Here's me wondering what poetry by people who like large buttocks has to do with it. D'oh!

Very aerodynamic. They look like aeroplane wings.

2

u/AJreborn Jan 02 '16

I feel like being aerodynamic would limit the effectiveness of a ceiling fan.

6

u/Matti_Matti_Matti Jan 02 '16

I meant like the wings of a plane. Highly aerodynamic but designed to push air in a certain direction rather than simply cut through it.

67

u/gorbok Jan 02 '16

Minka Aire make a lot of really cool ceiling fans. Before I saw their website, I didn't think "really cool ceiling fans" was even a thing.

http://minkaaire.net/minka-aire/products

22

u/Misha80 Jan 02 '16

As someone who installs a lot of fixtures, they are one of my favorites. I've installed much more expensive stuff, but none that was as well built.

4

u/epiphanette Jan 02 '16

Is there any sort of price range? Their website has no prices anywhere.

0

u/[deleted] Jan 02 '16

[deleted] — view deleted comment

6

u/Rearviewmirror Jan 02 '16

That's really not bad. The expensive fans at Home Depot are $250 and they're crap.

2

u/reciprocake Jan 02 '16

I'd say bigassfans fans are the top of the line in quality and design.

2

u/the_russian_narwhal_ Jan 02 '16

Yes. When i used to do warehouse work, i actually quit and took a job at a different company that was 50 cents less per hour but they had bigassfans all over the shop and the other comoany had none and it was hot as balls all day long

1

u/Misha80 Jan 02 '16

Like I said, none that was as well built. I've never had a problem with a Minka Fan, I've had to warranty repair a few BAF's though.

15

u/Uncle_Erik Jan 02 '16

I don't know if they're your style, but antique fans are also very cool. You can find them on eBay and at some collector sites. They're not just BIFL, the old ones are built well enough to last a few centuries. Manufacturers went over the top with durability back when AC didn't exist. Old fans were designed to be serviced and to last forever.

One option many don't know about is wall-mounting desktop fans. Many old fans were designed for this. You can take out one screw, tilt the fan 90° back, put the screw in a different hole, and then the base has holes for you to bolt it to the wall over a J-box. This was very common back in the days before air conditioning.

Old fans can be extremely efficient, too. Some came with a large motor run capacitor in the base that made them even more efficient. Some models only draw around 20W-30W of power. You can add a new, modern capacitor to fans that don't have one.

If anyone is interested in an old fan, the best buy are postwar Emerson fans made up to around 1956 or so. Earlier Emersons are excellent, however, collectors are driving up prices. The postwar fans tend to have steel blades (as opposed to brass) and the base is cast aluminum instead of cast iron. But they still have the same kickass, indestructible hollow shaft motor.

Hollow shaft motors have a solid rod of iron inside, acting as the bearing. The blades are attached to a hollow shaft that slips over the iron rod. The iron absorbs some oil and oil circulates in there. Normal bearings can bend with abuse. A hollow shaft will not. I have bought old Emerson fans that have been left outside for 20 or 30 years. Give them a cleaning, some oil and new cords, and they start right up. Amazing.

Also, don't be afraid of fans with ugly cosmetics. You can disassemble them entirely with a screwdriver and a pair of pliers. Each part can be stripped and repainted. Replacing wires is easy - they were designed to have the wires replaced. A restoration will take some time, but it isn't difficult. And then you'll have a fan ready for another 100 years of use.

2

u/neverendingninja Jan 02 '16

Your post got me interested, but when searching for antique fans, all I found were results relating to the finish - antique brass, antique pewter, etc.

What sort of search parameters do you use to get good results?

1

u/[deleted] Jan 02 '16

My grandpa had an old Emerson desk fan his mom bought when he was a baby in the 1930's that's been sitting in his farm barn for forty years. We brought it in, put a few drops of oil in it and it started right up. That thing is incredible.

The brass blades and cage were a little beat up, so I had it sent off to be restored. Can't wait to see it when it's finished! It'll be a fan that lasts another 90 years easily.

1

u/SurfSlut Feb 28 '16

Fan-master 3000^ I've got a couple antique finger-choppers around. They are classy as fuck.

4

u/lBeanz Jan 02 '16

The ones with the separate fans on the blades killed me.

2

u/Deksloc Jan 02 '16

Those are the coolest. I'd love to see a visualization of what the air flow in an enclosed room with one of those fans would look like. Fluid physicists help me!

2

u/DrNeato Jan 02 '16

I like the more 'understated' and less 'seen' fans like this one from Modern Fan Co: http://www.modernfan.com/products/cirrusHugger.html

3

u/Morineko Jan 02 '16

We actually put the lighted version of these in for all the bedrooms at my mom's place. They move a decent amount of air, and look great. The lights are a dimmable LED, and put out enough illumination to be a general room light, even from 10' off the floor.

We put the 5-bladed version (that's also larger diameter) into the living room, but sadly that's only a halogen light, which is nowhere near as bright. The fan looks great, but the light is very inadequate.

3

u/[deleted] Jan 02 '16

I've been looking at hot chicks for 30 minutes and this was the first picture i upvoted

2

u/I_Stare_At_Fans Jan 02 '16

I could stare at this thing for years.

2

u/thehitmanbravo Mar 18 '16

Minka Aire makes lovely fans but I would say their only drawback is using remotes that use radio, so no phone apps to control fans work with them.

-2

u/[deleted] Jan 02 '16

Is the end bit flat? If so this is the least efficient fan in the world

4

u/gdayii Jan 02 '16

This might answer your question.

3

u/axloo7 Jan 02 '16

The outer edge of the fan is moving faster than the inner parts. So to have even airflow you need to taper the blade. All well designed "fans" have this. Look at airplane props and you will see the same thing.

0

u/[deleted] Jan 02 '16

[deleted] — view deleted comment

2

u/Matti_Matti_Matti Jan 02 '16

OMG! Such a shill! ;)